···
Log in / Register

How to use the cigarette lighter in the Sylphy?

4 Answers
BriannaFitz
07/25/25 6:13am
The method to use the cigarette lighter in the Sylphy is: 1. Turn on the car power and insert the cigarette lighter into the power socket; 2. Insert the cigarette lighter into the car power socket and press down to lock it; 3. The cigarette lighter will start heating, and it will automatically pop out when the heating wire reaches the required temperature; 4. Place the cigarette lighter back into the power socket position. The Sylphy is a compact 4-door 5-seater sedan with body dimensions of: length 4631mm, width 1760mm, height 1503mm, and a wheelbase of 2700mm. It is equipped with a 1.6L engine and a 5-speed manual transmission, with a maximum power of 90 kW and a maximum torque of 155 Nm.
Was this review help?
14
0
Share
DelRuby
08/11/25 1:03pm
I recently bought a Nissan Sylphy, and the cigarette lighter feature in the car is quite practical. It's installed near the center console and usually appears as a small round socket. If you want to light a cigarette, just press the button in the middle—it heats up automatically and pops out in about 10 seconds, ready to use. It's very convenient. More often, I use it as a power outlet by plugging in a phone charger adapter to power my devices. It's a lifesaver when my phone runs out of battery while using navigation during drives. However, be careful not to use it continuously for too long, like over 30 minutes, as it can overheat and get damaged, especially in the summer when the car interior gets hot. The Sylphy's design places it well next to the cup holder, so it doesn’t interfere with driving. It's recommended to regularly clean the socket to remove dust and ensure good contact, making it safer and more durable. Overall, it's a small feature with big utility—a must-have for driving out.
Was this review help?
8
4
Share
Expand All
ElliotDella
09/27/25 5:21am
I have many years of driving experience, and the Nissan Sylphy's cigarette lighter is very simple to use. It's located below the dashboard on the center console, easily within reach. To light a cigarette, press the button and wait for 10 seconds until it automatically pops out for use. Nowadays, most people use it more for charging devices like phones or tablets. Just buy a car charger adapter, plug it in, and it provides power directly. However, safety first—avoid plugging in multiple devices at the same time to prevent short circuits or overheating. The Sylphy's battery operates on a 12V system, and excessive use can drain it quickly, so always unplug devices before turning off the engine. Regularly check if the plug is loose and clean the contacts to prevent oxidation. This will extend its lifespan and ensure it works reliably in emergencies.
Was this review help?
15
3
Share
Expand All
VonGia
11/10/25 7:21am
I commute to work in my Nissan Sylphy, and the cigarette lighter in the car is very convenient to use. Generally, it's located in the front center console near the driver's seat—just look for the small round socket. When I need to charge my phone, I simply plug in the car charger, and the position is perfectly designed for easy access. Lighting a cigarette is a bit more involved: press the button, wait about ten seconds for it to pop out, and then use it to light up. Although this feature isn't used much nowadays, it comes in handy in emergencies, like lighting a cigarette or starting a fire. Just remember not to leave the adapter plugged in all the time to prevent overheating. The setup in the Sylphy is quite user-friendly—positioned safely without obstructing the view. A few simple steps cover daily needs.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What should be paid attention to during the break-in period of an automatic transmission new car?

Precautions for the break-in period of an automatic transmission new car: 1. Warm up the car before starting. After starting the vehicle, it takes some time for the engine oil to fully lubricate all parts from the oil pan to the engine components; 2. The break-in period is divided into three stages. For the first 500 kilometers, try to drive at a speed of 60 to 70 km/h, with the engine speed not exceeding 2200 rpm for optimal performance; 3. Between 500 to 1000 kilometers, the speed can be increased to 90 to 100 km/h, with the engine speed kept below 2500 rpm for optimal break-in; 4. After 1000 kilometers, the speed can be increased to below 120 km/h, with the engine speed not exceeding 3000 rpm; 5. Never suddenly shift into P or R gear while driving an automatic transmission new car, as this can cause severe mechanical impact and may immediately damage the transmission.
8
1
Share

What does parking heating mean?

Parking heating system is an independent auxiliary heating system on the vehicle, which is not directly connected to the engine. It can be used after turning off the engine, and can also provide auxiliary heating function during driving. The parking heating system is an auxiliary heating system that does not rely on the engine, and its unique working principle determines that its function is different from the ordinary vehicle heating system. The parking heating system overcomes the limitation of ordinary vehicle heating systems that rely on the engine, and can improve the speed of vehicle heating. Some types of parking heating systems also provide an engine warm-up function, which greatly improves the cold start performance of the engine, reduces engine wear during cold starts, and also improves vehicle fuel economy.
6
3
Share

What kind of engine oil should be used for Jetta sedans?

Jetta sedans use engine oil with the specification VW50200, and 5W40 or higher-grade engine oil can also be used. The oil filling capacity is approximately 4L. The Jetta is available in two displacement models: 1.4L and 1.6L, both with an oil maintenance cycle of 5,000 km. The new Jetta 1.4L model is equipped with a 1.4L EA211 engine, which reaches its maximum power output of 66 kW at 5,500 rpm and its maximum torque output of 132 Nm at 3,800 rpm. The Jetta's body dimensions are 4,501 mm in length, 1,704 mm in width, and 1,469 mm in height, with a wheelbase of 2,604 mm.
10
0
Share

Where to Stick Car Door Anti-Collision Strips?

Car door anti-collision strips are usually attached to the side of the door, primarily to prevent minor scratches and damage to the parts. Generally, installing anti-collision strips does not affect the annual vehicle inspection. However, for the sake of overall coordination, the color of the strips on the front and rear doors should be consistent. If the edges of the door anti-collision strips peel off, you can use adhesive remover to clean them—spray it on, let it sit for a while, and then wipe off the glue. Benefits of anti-collision strips: 1. They have a certain elasticity and strong anti-collision performance; 2. They are stylish and practical, and not prone to fading; 3. They are easy to use, can be bent at any angle, and are convenient to stick.
8
2
Share

How to Check if the Transmission Fluid is Sufficient?

Methods to check if the transmission fluid is sufficient: 1. Directly check via the transmission fluid dipstick; the normal level should be between the maximum and minimum marks. 2. There is an inspection screw on the side of the transmission. Remove this screw, and if transmission fluid flows out, it indicates sufficient fluid. If no fluid flows out, it means more fluid needs to be added. Transmission fluid is an oil product that keeps the gear system clean, ensuring the transmission operates properly and extends the lifespan of the transmission components. Most transmission fluids are compatible with automatic transmissions on the market. In fact, each automatic transmission design has different technical requirements. Even the same model of transmission configured in different vehicles may vary in torque, weight, speed, and structure. Therefore, the original manufacturer specifies its own dedicated transmission fluid.
17
3
Share

How to Control the Clutch Well in Subject 2?

Methods for controlling the clutch well in Subject 2: Mainly involves making slight adjustments around the semi-engagement point. Press the pedal with the ball of your foot, pushing it all the way down, with the heel either suspended or not bearing weight, and the leg slightly lifted. The entire foot's pressure point is on the ball of the foot. When shifting gears and pressing the clutch, generally press it down quickly all the way, and when releasing the clutch, the first half can be slightly faster, but the latter half must be lifted slowly. The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power input from the engine to the transmission.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.