How to use the cigarette lighter in Chevrolet Malibu XL?

2 Answers
Lilah
08/26/25 2:46am
Chevrolet Malibu XL's cigarette lighter is located in the storage compartment in front of the gear lever. To use it, simply press the handle switch, and it will automatically heat up. Here is additional information: 1. Different components of the cigarette lighter fuse are controlled by fuses of different specifications. Automotive electrical equipment has high requirements for current and voltage. Random replacement may cause the fuse to blow or even lead to a fire. Therefore, it is not recommended for non-professionals to replace the cigarette lighter themselves. 2. The Malibu XL is built on General Motors' most advanced mid-to-high-end car platform, fully incorporating General Motors' next-generation drive system, which is developed with intelligent driving technology, globally leading intelligent manufacturing, and high-standard global supply chains.
Was this review help?
10
5
Share
VonJack
09/08/25 2:49am
When I first drove the Chevrolet Malibu XL, I was a bit confused about the cigarette lighter—it's actually just a small socket. You can usually find it in the middle of the dashboard. Press the plastic cap, and it will pop out on its own, heating up after a few seconds. Then, you can use it to light a cigarette or plug it back into the socket. It also works for charging your phone—just plug in a car charger. Note that it only works when the car is running, and avoid pressing it too hard for too long to prevent blowing a fuse. The cigarette lighter is super convenient as a power source, but try to keep kids away from it to avoid accidents. Get into the habit of unplugging devices after parking to ensure your battery lasts longer.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Where is the fuel filler button on a Cadillac?

The fuel filler door of the Cadillac XT4 is located behind the fuel filler door on the right rear side of the vehicle. The relevant explanations are as follows: 1. Opening method: To open the fuel filler door, press and release the middle edge at the rear of the filler door. When the vehicle doors are locked, the fuel filler door is also locked. Press the unlock button on the remote key to unlock it. 2. Additional note: The fuel tank cap may be on the left or right side of the vehicle. In China, the right-hand traffic rule is followed, so the fuel tank cap is generally on the right side. However, for Haval and Changan vehicles, the fuel tank cap is on the left side.
9
2
Share

Can You Drive with a Tire Pressure Warning?

Tire pressure warning means you should not drive. When tire pressure is low, the contact area with the ground increases, generating significantly more rolling heat compared to standard pressure. This can cause deformation and accelerated fatigue of the internal cord layers, potentially leading to structural damage in severe cases. Every car's tires have a specified pressure range that directly affects their performance and responsiveness. The normal tire pressure for most vehicles falls between 230 to 250kpa, but the exact recommended value should follow the manufacturer's guidelines. Insufficient tire pressure causes the side edges to contact the ground instead of the entire tread surface.
2
2
Share

How to Handle a Traffic Violation with Only 2 Points Deducted and No Fine?

If a traffic violation results in a deduction of 2 points but no fine is issued, you still need to go to the vehicle management office to handle it. The relevant regulations for handling traffic violations are as follows: 1. According to the "Road Traffic Safety Law": Article 108 states that the party concerned shall pay the fine at the designated bank within 15 days from the date of receiving the administrative penalty decision. 2. Penalty: Article 109 states that if the party concerned fails to fulfill the administrative penalty decision within the time limit, the administrative organ that made the penalty decision may take measures such as imposing an additional fine of 3% of the fine amount per day for overdue payment; it may also apply to the People's Court for compulsory enforcement.
20
4
Share

Why is there a noise when shifting gears in an automatic transmission?

Automatic transmission shifting noise may be caused by the following reasons: 1. Lubrication: The release bearing lacks lubricant, resulting in dry friction or bearing damage. 2. Clearance: There is no gap between the release bearing and the inner end of the release lever. 3. Release bearing: Severe oil contamination or dust accumulation between the release bearing sleeve and the guide tube, or fatigue, breakage, or detachment of the release bearing return spring and pedal return spring, causing poor return of the release bearing. 4. Looseness: Excessive clearance between the driven plate spline hole and its spline shaft. 5. Spring: Annealing, fatigue, or breakage of the driven plate damping spring. 6. Rivets: Loose rivets on the driven plate friction disc or exposed rivet heads.
12
0
Share

What is the AC button?

AC button is the cooling switch of the car air conditioning system. Its function is to activate the air conditioning compressor when pressed, which makes the air blown out by the blower become cold. The car air conditioning system consists not only of the compressor but also the condenser, evaporator, and expansion valve. The compressor is one of the main components of the refrigeration system, responsible for compressing and transporting refrigerant vapor. The method of using air conditioning for cooling is: 1. Start the engine for preheating, wait until the engine temperature pointer reaches the middle position, then turn on the cooling air conditioning; 2. Set the air circulation to external circulation to expel the cold air inside the car, wait for 2 to 3 minutes, and then set the air circulation to internal circulation.
13
5
Share

Where is the SWM X3 produced?

SWM Motors originates from Italy. The domestically independently developed vehicle is produced in Chongqing, China. SWM Motors belongs to the Brilliance company and is a brand under Brilliance. The origin of SWM: In 1971, the SWM brand was established in Milan, Italy, and became popular in Europe and America during the 1970s-1980s, serving as a symbol of Italian manufacturing. The development of SWM Motors: In 2014, the Dongfang Xinyuan Group fully acquired the Italian SWM brand and simultaneously established the SWM Motors Design Center in Milan, Italy. In the same year, a modern industrial production base covering 1704 acres was built in Fuling, Chongqing, with the Italian R&D center responsible for the vehicle's exterior design.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.