How to use the car door light?

2 Answers
SanEmiliano
09/07/25 5:53am
When the door is opened, the dome light will illuminate. If the door is ajar or not properly closed, it will also light up as a warning. The 'door' indicator is typically found on the reading light and represents the reading light's activation mode, where 'door' signifies the door status. Below is relevant information about car reading lights: 1. Interior reading lights generally have three position switches: off, on, and door. When the reading light control switch is in the 'door' position, the light will turn on if the door is opened. After the driver exits the vehicle and removes the key, the reading light will remain illuminated for 15 seconds before turning off. Additionally, when the mechanical key is not inserted into the ignition switch and the ignition switch is turned to the 'LOCK' position, the light will also illuminate. 2. Press the reading light button, then unlock the car (i.e., open the door and enter the vehicle). After closing the door, the interior reading light will turn on. If the car is unlocked, the light will illuminate. If no action is taken for a certain period (without pulling the handle) and the car is locked, the light will turn off. Furthermore, there is a 'dual' button on the front panel, which refers to the dual-zone air conditioning. Pressing this button will light up the indicator, allowing you to set the air conditioning temperature for both the driver and front passenger seat areas.
Was this review help?
19
4
Share
RosalieFitz
09/19/25 5:09am
Using the car door light is quite simple. It automatically turns on when you open the door, illuminating the interior or the area near your feet, making it convenient to grab items or get in and out of the car, especially in parking lots at night. After closing the door, the light turns off by itself within a few seconds, saving power and hassle. Most cars don't have an additional switch to control this feature—it's enabled by default unless the car model is special, in which case there might be an option on the dashboard to disable the auto mode, but it's generally best not to tamper with it. Having used cars for over a decade, I find this design quite thoughtful, reducing the hassle of searching for keys or phones in the dark. Maintenance-wise, there's little to worry about—the bulbs have a long lifespan, typically needing replacement every five years. If the light doesn't turn on, it might be due to a stuck door switch or loose wiring, which can be fixed with a simple cleaning or by having someone check it.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Are the Questions for Subject One and Subject Four the Same?

Subject One covers the examination content for motor vehicle drivers, which is divided into road traffic safety laws, regulations, and related knowledge tests, while Subject Four focuses on the safe and civilized driving common sense test. Subject One Examination Content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; basic knowledge of safe driving and civilized driving; basic knowledge related to motor vehicle driving operations. Examination Duration: The Subject One examination lasts for 45 minutes. Passing Score for Subject One: The total duration of the Subject One examination is 45 minutes, and the test paper consists of 100 questions, including true/false questions and single-choice questions. The maximum score is 100, with a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportional relationship specified in the "Motor Vehicle Driver's License Work Regulations."
1
0
Share

Can I Bring My Phone into the Subject 3 Driving Test?

Yes. Here is additional information: Situations that result in failing Subject 3: Not fastening the seatbelt. Starting with insufficient tire pressure. Starting without closing the door properly. The vehicle rolling more than 30 cm during startup. Unstable control of the vehicle's direction. Both hands leaving the steering wheel simultaneously. Gear shifting issues, or failing to shift gears twice in a row. Coasting in neutral while driving. Exceeding the speed limit. Subject 3 tips: You can bring your phone during Subject 3, but it's best to turn it off to avoid affecting the test. Startup details: Walk around the vehicle counterclockwise from the driver's door, return to the driver's door, enter the vehicle, adjust the seat and fasten the seatbelt, lightly press the accelerator to check if the instruments are normal, and apply for the Subject 3 test.
18
0
Share

How to Open a Car Door with a Key?

You can use a remote key or a mechanical key to open a car door. Here is a detailed introduction on how to open a car door with a key: 1. Using the remote key to unlock the door: Press the unlock button, and the door lock will release. If there is no response, replace the remote key battery. 2. Using the mechanical key to open the door: There is a decorative piece at the end of the door handle that is about the same size as the key. Open it to access the keyhole. 3. If the mechanical key cannot open the door, it may be because the car's central locking system is in an electronically locked state or the door lock cylinder is stuck and cannot turn: If the central lock is electronically locked, wait for the lock to be released before attempting to unlock again. If the door lock cylinder is stuck and cannot turn, you may have to break the window to open the door or contact a 4S shop for repair.
2
5
Share

Why does the new Sagitar shake during cold start?

Sagitar shaking during cold start may be caused by excessive carbon deposits in the engine. Here are detailed explanations about Sagitar's shaking issue: 1. Cause of shaking: Carbon deposits on valves and intake ports can lead to incorrect judgments by the ECU, resulting in insufficient fuel injection. Even with fully combusted air-fuel mixture, it cannot guarantee adequate power output, thus causing vehicle shaking. 2. Technical principle: During low temperatures, the temperatures of the engine, fuel, and lubricant are all insufficient. Therefore, more fuel should be injected during cold starts to meet power requirements. The larger the spark plug gap, the smaller the ignition energy. Poor fuel atomization at low temperatures requires higher ignition energy. With prolonged use, the spark plug gap tends to increase, leading to reduced ignition energy, which affects power output and causes vehicle shaking.
9
3
Share

Can a motorcycle still be inspected if it hasn't been inspected for a year?

If a motorcycle hasn't been inspected for a year, it can still continue to participate in the annual inspection. Motorcycle annual inspection: The first inspection is when the license is renewed after six years, and the second inspection is when the license is renewed after ten years. After the license is renewed after ten years, it becomes a long-term driver's license, which does not need to be renewed or inspected. Motor vehicle annual inspection form: The vehicle owner or unit needs to fill out the "Motor Vehicle Annual Inspection Form" and send it to the designated location for annual inspection on the date specified by the local vehicle management office. If the vehicle passes the inspection, the vehicle management authority will stamp the driving license and the "Motor Vehicle Annual Inspection Form" with (×× Year ×× Vehicle Management Office Inspection Passed) seal.
7
1
Share

How Many Points Are Deducted for Braking in Subject 2?

No points are deducted. In Subject 2, braking is required for the slope fixed-point parking and start, parallel parking, and reversing into a garage. Braking can also be used in other sections, and some students can pass the test by lightly applying the brake throughout Subject 2. However, it is important to avoid stopping midway, meaning the speed drops to zero. A pause of more than 2 seconds during the test will be judged as stopping midway, resulting in a 5-point deduction. If the engine stalls due to improper operation, a 10-point deduction will be applied. Below is additional information: Notes: Apart from using the brake pedal to control speed, the clutch can also be used to regulate speed. If students feel the speed is too fast to steer promptly or need a bit more reaction time, they can slightly depress the clutch to reduce power output, thereby achieving better speed control.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.