How to Use the Car Display Screen?

1 Answers
ColemanAnn
07/29/25 9:09pm
Short press the DISP button to switch between displays: range, instant fuel consumption, average fuel consumption, average speed, driving time, since start, and tire pressure. Short press to enter Bluetooth function or connect to the service center function. RES is the resume cruise/accelerate button. SET is the set cruise/decelerate button.
Was this review help?
14
5
Share
More Forum Discussions

What brand is the Monkey motorcycle?

Monkey motorcycle is a brand of Honda. Motorcycle gear shifting method: For the rotary gear system, stepping forward once is first gear, stepping again is second gear, stepping again is third gear, stepping again is fourth gear, stepping again is neutral. From neutral, stepping forward again returns to first gear. When in neutral, stepping backward shifts to fourth gear, and so on in a cyclic manner. With your left hand, pull the clutch lever, and with your left foot, press the rear clutch operating rod to downshift one gear. Generally, motorcycles have four to five gears. First and second gears are suitable for climbing hills. Third and fourth gears are suitable for normal road driving, while fifth gear is suitable for smooth road surfaces and allows for very high speeds. Location of the motorcycle main switch: Under the seat, open it with the keyhole on the right side of the vehicle.
16
5
Share

Why does the clutch make a clunking sound when released too quickly?

When the clutch is released too quickly, a clunking sound may occur due to the driven friction plate being loose on the steel plate or the separation lever colliding with the window hole. Metal knocking sound when releasing the clutch: If a "click" or "clang" metal impact sound is heard at the moment the clutch engages or disengages, and it is more noticeable when starting with a heavy load, it is caused by excessive clearance between the driven plate spline hole and its shaft. In severe cases, it should be repaired or replaced. If a "clattering" impact sound is heard, this is due to the driven friction plate being loose on the steel plate or the separation lever colliding with the window hole. Sharp screeching sound when releasing the clutch: If a sharp screeching sound is heard just before the clutch engages, and the sound disappears when the pedal is pressed down but reappears when the pedal is released, this is caused by the driven plate steel plate being broken or the rivet heads protruding and scraping against the pressure plate or flywheel. It should be repaired. "Clunking" sound when releasing the clutch: If the clutch pedal is released very slowly and the vehicle jerks forward with a "clunking" sound, this is caused by the sudden engagement of the driving and driven parts. The reasons come from two aspects: one is the deformation of the driven plate or oil contamination on the friction lining, causing the clutch to continue engaging and resulting in jerking; the other is the linkage system being stuck, causing the pressure plate to suddenly press against the driven plate and resulting in jerking.
16
1
Share

What does the M on the car mean?

M on the car stands for manual mode. Precautions for shifting gears in a car: Do not press the accelerator pedal when shifting gears; do not immediately press the accelerator pedal hard after shifting into gear; the vehicle can only be started in P or N gear; the gear lever must be removed from P gear while pressing the brake, etc. Advantages of automatic transmission: The advantages of automatic transmission are reflected in its intelligence, no need to shift gears, ease of use, simplicity, and higher safety of the automatic transmission. Driving operation is simpler, and with the absence of the clutch and manual gear lever, there is less need for coordination with the left foot, thereby reducing the driver's workload and mechanical wear.
5
1
Share

Can I Claim Insurance for Damaged Rims?

Damaged rims cannot be claimed under insurance. Specific situations where claims are possible: If only the tire is damaged, no claim is made, replace it yourself; if only the rim is damaged, no claim is made, replace it yourself; if both the tire and rim are damaged and need replacement, then you can claim insurance. Apart from this, individual damage to components like headlights, rearview mirrors, sunroofs, etc., is also not claimable. Procedure for claiming insurance in a single-party accident: First, report the incident, then assess the damage, repair the vehicle, and finally, submit the claim to the insurance company. If the insurance was purchased at a 4S store, they will handle all the procedures. If there are injuries, first report the incident and send the injured to the hospital. Specific matters will be analyzed case by case. Most importantly, keep all hospital receipts ready, as the insurance company needs them for records. Without these, the insurance company will not reimburse.
2
3
Share

How to turn off the TC slash indicator on the car?

TC indicator with a slash indicates a tire pressure loss. The method to turn it off is to first press the vehicle's one-touch start button to start the car; otherwise, it cannot be turned off. Then, click the off button on the left side of the multifunction steering wheel to turn off the indicator light. Reasons for the TC warning light to come on: This light indicates a fault in the traction control system, which should be repaired immediately as it can affect the vehicle's driving stability and safety. Possible causes of this fault include: Faulty solenoid valve; Dirty engine oil clogging the solenoid valve filter; Wear of the actuator gear and impeller causing oil pressure leakage; Dirty throttle body.
2
5
Share

What is the difference between dual-clutch and AT?

The difference between a dual-clutch transmission and an AT transmission lies in the fact that the dual-clutch transmission is based on a manual transmission. In addition to offering the flexibility of a manual transmission and the comfort of an automatic transmission, it also provides uninterrupted power output. Function of the clutch: The clutch is located between the engine and the transmission and serves as the 'switch' for power transmission between them. It is a transmission mechanism that can both transmit and cut off power. Role of the clutch: Its main role is to ensure smooth vehicle starting, reduce the impact load on transmission gears during gear shifting, and prevent overload in the transmission system.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.