How to use the built-in dash cam in the new Sylphy?

What does an exclamation mark in the car mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and wiper fault indicator light. The following is a detailed introduction to the exclamation mark warning lights: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Mainly includes parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil should be replaced in time. Brake system fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a fault in the brake system or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure abnormality: A horizontal line under parentheses with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating that a car light has failed. Solution: Go to a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem. In addition, during daily use of the vehicle, the warning lights displayed on the vehicle dashboard are divided into two different colors, yellow and red: Yellow indicates that there is a fault in the corresponding system, but the problem is not very serious. It is necessary to slow down and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates that there is a very serious problem in the corresponding system. In this case, do not continue driving. You should pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety caused by forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, the lights will automatically turn off. If a light does not turn on when the ignition is turned on, or stays on without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, professional help should be sought immediately for car inspection to eliminate potential safety hazards.

7

4

Share

How to activate the one-touch window lift for the Civic Sport?

The one-touch window lift function of the Civic Sport does not require activation and can be used directly after purchase. The features of the Civic Sport are as follows: 1. Keyless entry: When the owner approaches the door with the key, the key's inherent frequency matches the signal sent by the car's controller, allowing the owner to directly touch the one-touch lock button on the door handle to open the door. 2. Anti-pinch window function: When the AUTO button is pressed and the window automatically rises, if an obstacle is encountered, the window glass will stop rising and instead descend immediately. Additionally, upon sensing an obstacle, it will reduce the upward force.

8

3

Share

What is the oil specification for Toyota RAV4?

Toyota RAV4 uses engine oil with the specification 5W-40. The following is a detailed introduction to automotive engine oil usage: 1. The type of engine oil used in a vehicle should be determined by the engine it employs, as different types of oil serve different purposes and offer varying levels of engine protection. 2. There are three types of engine oil for vehicles: mineral oil, semi-synthetic oil, and fully synthetic oil. 3. For vehicles equipped with small-displacement naturally aspirated engines, mineral oil or semi-synthetic oil is recommended. For vehicles with turbocharged engines, fully synthetic oil or semi-synthetic oil should be used.

12

1

Share

Can Windshield Washer Fluid Be Diluted with Water?

Generally, windshield washer fluid does not need to be diluted with water and can be added directly. Below is relevant information about automotive windshield washer fluid: 1. Automotive windshield washer fluid is typically categorized into summer-use 0°C fluid and winter-use -20°C or -35°C fluid; 2. Automotive windshield washer fluid is made from deionized water combined with various environmentally friendly additives. It functions to clean, wet, prevent freezing, reduce static electricity, and resist corrosion, effectively removing dust, lubricants, gasoline, diesel, residual polishing wax, chewing gum, bird droppings, and highway insect residue; 3. It can quickly disperse rainwater on the windshield, preventing blurred vision for drivers during heavy rain.

2

Share

What are the main functions of an engine lubrication system?

The lubrication system has the following five major functions: 1. Lubrication: Engine oil forms an oil film between moving parts, reducing friction resistance and power loss, and minimizing component wear. 2. Cooling: The fluidity of engine oil helps dissipate some of the heat from engine components, preventing overheating and potential damage. 3. Cleaning: Circulating engine oil carries away metal particles generated during operation, dust from the atmosphere, and solid byproducts from fuel combustion, preventing abrasive wear between components. 4. Sealing: The viscosity of engine oil allows it to adhere to the surfaces of moving parts, enhancing sealing effectiveness and reducing gas leakage. 5. Rust prevention: The lubricating oil film adheres to metal surfaces, isolating them from air and moisture, thereby preventing rust and corrosion.

19

4

Share

Is There an Examiner Present During the Subject Two Driving Test?

There is no examiner in the car during the Subject Two driving test. Below is relevant information about Subject Two: 1. Basic Skills: Subject Two requires students to master fundamental driving operation essentials and possess basic vehicle control capabilities. They must be proficient in basic methods of driving on the training ground and internal roads, capable of reasonably using vehicle control components and correctly managing the vehicle's spatial position, and accurately controlling the vehicle's position, speed, and route. 2. Failing the Test: If a candidate fails the Subject Two test, they must first pay a retake fee at the Vehicle Management Office. According to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," each test subject can be retaken once if the initial attempt is unsuccessful.

8

2

Share

How to use the built-in dash cam in the new Sylphy?

What does an exclamation mark in the car mean?

How to activate the one-touch window lift for the Civic Sport?

What is the oil specification for Toyota RAV4?

Can Windshield Washer Fluid Be Diluted with Water?

What are the main functions of an engine lubrication system?

Is There an Examiner Present During the Subject Two Driving Test?

What to Do After Failing Subject 2 Five Times?

Why is there a processing fee for Subject 3?

Where is the oil-water separator located on the Great Wall Fengjun 5?

What is the fuel consumption of the Chevrolet Blazer?