How to Use the Built-in Dash Cam in a Car?

What to Do About Audi Q5 Burning Engine Oil?

Audi Q5 burning engine oil can be addressed primarily through the following two methods: 1. Disassemble and repair, replacing the worn components. Although this involves a higher one-time cost, it ensures durability, reliability, and the restoration of vehicle power. 2. Use additives, but this is only a temporary solution. If you do not plan to change the car, relying on additives is not recommended. Below are the reasons why Audi Q5 burns engine oil: (1) Improper selection of air filters, oil filters, or engine oil, leading to insufficient purification of gas impurities entering the cylinder. Various dust particles enter the cylinder, accelerating cylinder wear. (2) Excessive addition of engine oil. (3) Incorrect ignition timing, either too early or too late. This can cause knocking, raising the engine temperature, and in severe cases, may lead to piston separation or cylinder block failure.

7

5

Share

Does the GAC GS8 have a 5-seater version?

The new GAC GS8 does offer a 5-seater variant. Its design primarily features the following two aspects: 1. The exterior exudes an imposing presence with highly distinctive design elements across all aspects. The linear daytime running lights and fog light design are exceptionally fashionable and avant-garde, creating a dazzling effect when illuminated at night. The precise body lines are meticulously arranged, appearing smooth yet powerful, giving the vehicle a robust appearance. The wheel design also emphasizes sportiness, complemented by abundant sporty exterior kits. The dual large-area exhaust pipes at the rear further enhance the vehicle's dynamic and powerful character. 2. Under the hood, it is equipped with a 2.0T turbocharged engine paired with a 6-speed automatic transmission. The wraparound cockpit design enhances the sense of spaciousness, while the dashboard and door interiors are generously wrapped in soft-touch materials.

11

1

Share

Can a car pass the annual inspection with a small spoiler added?

Adding a spoiler to a car will not pass the annual inspection. During the annual inspection, the vehicle will be checked for any modifications, alterations, or transformations, and whether the vehicle's registration, license plate, and vehicle records match the actual condition of the car, including any changes. Unless the vehicle modifications, alterations, or technical transformations have not undergone the required approval and modification procedures. Below are some relevant details about vehicle annual inspections: 1. For small and micro non-operational passenger vehicles, inspections are required every 2 years within the first 6 years, annually after 6 years, and every 6 months after 15 years. If a vehicle fails to undergo the required safety technical inspection within the specified period, the public traffic management department may issue a warning or impose a fine of up to 200 yuan. In other words, failing to complete the inspection on time is illegal. 2. Vehicles must regularly pass exhaust emission tests, as well as inspections for exterior appearance, lights, brakes, chassis, etc., and must have no outstanding traffic violations to receive the inspection compliance mark. Before the inspection, it is advisable to keep the vehicle clean, ensure the tires are free of mud, and especially make sure the light covers are clean. Any outstanding traffic violations in the vehicle's usage location must be resolved in advance.

3

1

Share

How to Use Cruise Control in a Car?

Steps to use cruise control in a car: 1. Locate and press the cruise control button on the steering wheel; 2. When the car reaches the desired cruising speed, press the set button downward; 3. After setting the cruise control speed, you can press the button upward or downward to fine-tune the cruising speed; 4. While using cruise control, always pay attention to road conditions. When the cruise control function is activated, you can press the accelerator to make the speed reach or exceed the lower limit of the cruise control speed. After confirming the activation of the cruise control function, the engine fuel will be automatically supplied to meet the power demand for the current speed.

19

1

Share

Can the clutch of Baojun 360 be adjusted?

Baojun 360 is equipped with a hydraulic clutch, which can be adjusted for lightness or heaviness, but the adjustable range is relatively small. The clutch only requires minor adjustments when it wears out over time. If you wish to adjust it, you can loosen the screw below and manually pull the movable rod indicated by the arrow upward to its limit, while simultaneously pulling the connector originally fixed between the two screws downward to eliminate the gap distance in the linkage mechanism. Currently, there are two scenarios for adjusting car clutches: 1. Minor adjustments can be made by adjusting the clutch control part, but the hydraulic clutch control part is not adjustable. Mechanical clutches can be adjusted by modifying the tightness of the clutch cable or by changing the length of the clutch cable (altering the leverage). The former method allows for minor adjustments, while the latter offers a larger adjustment range. However, the latter method falls into the category of modification, and improper adjustment may affect driving safety, so it is not recommended. 2. It could also be due to component failure, requiring the replacement of related parts. Mainly, issues may arise with the clutch pressure plate, clutch disc, or release bearing, commonly referred to as the "clutch three-piece set." These components are consumable parts, and if they are faulty or severely worn, the clutch may become excessively heavy. Often, a heavy clutch is caused by problems with the "clutch three-piece set." Generally, the service life of the "clutch three-piece set" is similar, so it is best to replace all parts at the same time when necessary.

12

0

Share

What does sync mean on a car?

sync refers to the synchronization button of the dual-zone automatic air conditioning, and it is very simple to turn on and off. Press the sync button, and the temperature of the air outlets on both sides of the car will be the same and adjusted synchronously; when the air conditioner is turned on, if the temperatures on both sides are set differently, the sync will automatically turn off. Here are some related introductions about sync: 1. sync is the button to cancel the temperature synchronization on both sides, allowing the temperatures on both sides to be independent of each other, so there will be a dual-zone effect where the left side can blow hot air while the right side can blow cold air. 2. As long as the temperatures on both sides are different, the SYNC button will light up. At this time, pressing SYNC again will immediately make the air conditioning temperature on the passenger side the same as that on the driver's side, and then turning the passenger's temperature knob to change the temperature will still light up the SYNC. That is, the passenger's temperature will change with the driver's temperature, but the driver's temperature will not change with the passenger's temperature.

12

1

Share

How to Use the Built-in Dash Cam in a Car?

What to Do About Audi Q5 Burning Engine Oil?

Does the GAC GS8 have a 5-seater version?

Can a car pass the annual inspection with a small spoiler added?

How to Use Cruise Control in a Car?

Can the clutch of Baojun 360 be adjusted?

What does sync mean on a car?

Where is the cabin air filter located in the Ford Kuga?

Where is the Battery Located in a BMW 5 Series?

What is the standard pressure for car air conditioning?

How to Turn on the Fog Lights of Volkswagen Tayron?