How to use the BMW 3 Series LIM cruise control?

When to Use the Vehicle Anti-Skid System?

Vehicle anti-skid systems are used during rainy or snowy weather, on icy roads, or when the road surface is muddy and slippery. The working principle of the vehicle anti-skid system is as follows: through the ABS electronic control unit, based on the signals from the vehicle's wheel speed sensors, the system calculates and analyzes to determine the wheel slip rate and the vehicle's speed. The electronic control unit then adjusts the wheel slip rate by controlling the throttle opening and brake pressure to prevent the vehicle from skidding during driving. The function of the vehicle anti-skid system is mainly to control the longitudinal and lateral stability of the vehicle, ensuring that the vehicle moves according to the driver's intentions.

3

4

Share

What are the methods for defining China 5 and China 6 standards?

China 5 and China 6 standards are defined by the following methods: 1. The carbon monoxide emission limit for China 5 is 1000mg per kilometer, while for China 6 it is 700mg per kilometer; 2. The sulfur content limit for China 5 is 10ppm, and the manganese content limit is 2mg per liter, whereas for China 6, the sulfur content limit is 5ppm, and the manganese content limit is 1mg per liter; 3. During the China 5 phase, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. The methods to distinguish between China 5 and China 6 vehicles are: 1. Check the vehicle's factory certificate; 2. Refer to the vehicle's environmental standard list; 3. Examine the vehicle's conformity certificate.

16

1

Share

Which is brighter, LED lights or xenon lights?

Xenon lights are brighter. The functions of car lights are: 1. Accurately illuminate the road ahead to improve safety during nighttime driving; 2. Convey signals to avoid traffic accidents. Types of car lights include: headlights, fog lights, brake lights, daytime running lights, and hazard warning lights. Precautions for using car lights are: 1. Turn on low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, alternately use high and low beams to signal.

11

5

Share

Does Wheel Modification Affect Vehicle Inspection?

Wheel modification does affect vehicle inspection. The precautions for wheel installation include: 1. Regularly inspect the wheels and pay attention to any early warning signs of wear; 2. Wheels are sensitive and require the correct methods and appropriate tools; 3. Do not disassemble the wheels or adjust the sealing rings of the wheel units. The maintenance methods for wheels include: 1. When the vehicle is in a humid area, clean the wheels frequently to prevent salt corrosion on the aluminum surface; 2. If necessary, after cleaning, apply wax to the wheels to maintain their luster; 3. When the wheels are at a high temperature, allow them to cool naturally before cleaning. Do not use cold water for cleaning, as it may damage the aluminum wheels, cause brake disc deformation, and affect braking performance. Using cleaning agents on the wheels may cause chemical reactions on the surface, leading to loss of luster.

15

5

Share

What does MT stand for in cars?

In cars, MT stands for Manual Transmission. The functions of a car transmission are: 1. To change the transmission ratio; 2. To expand the torque and speed of the driving wheels; 3. To enable the car to drive in reverse; 4. To facilitate gear shifting or power output. Maintenance methods for car transmissions: 1. Replace automatic transmission fluid every 12 months or 20,000 kilometers; 2. Avoid coasting in neutral; 3. Regularly check the fluid level; 4. Do not skip gears when upshifting; 5. Do not force the transmission into neutral; 6. Do not shorten the idle warm-up time; 7. Avoid gear grinding when shifting; 8. Clean the transmission; 9. Avoid starting and driving without warming up the car; 10. Perform regular maintenance on the automatic transmission.

13

4

Share

Is It Necessary to Replace a Leaking Car Battery?

It is not mandatory to replace a leaking car battery. The causes of car battery leakage include: 1. Cracks in appearance, poor sealing between the upper cover and the base, or cracks in the sealing adhesive due to impact, leading to battery leakage; 2. Acid leakage from the cap valve; 3. Acid leakage at the terminal connections; 4. Acid leakage from other parts. The maintenance methods for car batteries are: 1. Start the car regularly to charge the battery; 2. Add distilled water or a special replenishing liquid when the electrolyte is low; 3. Frequently check if the small holes on the battery cover are ventilated during daily driving; 4. Inspect the positive and negative terminals for signs of oxidation; 5. Check all parts of the circuit for aging or short circuits; 6. Turn off electrical devices when leaving the car.

7

5

Share

How to use the BMW 3 Series LIM cruise control?

When to Use the Vehicle Anti-Skid System?

What are the methods for defining China 5 and China 6 standards?

Which is brighter, LED lights or xenon lights?

Does Wheel Modification Affect Vehicle Inspection?

What does MT stand for in cars?

Is It Necessary to Replace a Leaking Car Battery?

Where is the Dan K license plate from?

Is a steering wheel cover necessary?

What is the RPM for an automatic transmission engine?

How far can you drive after the oil change reminder appears?