How to Use the Baojun 510 Air Conditioning?

Is the Baojun 1.5T Engine a General Motors Product?

The Baojun 1.5T engine is indeed a General Motors product, developed and manufactured according to General Motors' powertrain standards. The production line is located at SAIC's Qingdao base. The Baojun 1.5T engine model is LJO, with a maximum power output of 108 kW, maximum torque of 104 N·m, maximum horsepower of 147 Ps, maximum power speed of 5300 rpm, and maximum torque speed range of 2200-3400 rpm. For daily maintenance of the Baojun 1.5T engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, the performance will degrade, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

10

1

Share

Where is the position light of Volkswagen Santana Vista?

The position light of Volkswagen Santana Vista is located on the fender above the front tires. It only lights up when the turn signal is activated or flashes when the hazard warning lights are turned on, serving as a warning to parallel vehicles. The position light will not illuminate unless the turn signal or hazard warning lights are activated. Other light positions of Volkswagen Santana Vista: Headlights, commonly known as high and low beams, are the largest lights on the front face of the car; rear position lights, located below the rear windshield as high-mounted brake lights, do not light up normally but form a triangular warning with the rear brake lights when the brake is pressed; fog lights, located at the very bottom of the front bumper, appear yellow and are symmetrically placed on both sides. The yellow-covered ones in the rear light assembly are also fog lights, used to warn vehicles in front and behind during heavy fog. How to turn on the lights of Volkswagen Santana Vista: There is a headlight knob on the left-hand side. Turning it one notch to the right activates the position lights, and turning it two notches activates the headlights. With the position lights already on, pulling the knob outward (like pulling a key) one notch activates the front fog lights, and pulling it two notches activates both front and rear fog lights.

16

2

Share

What does it mean when Mercedes-Benz detects tire pressure loss?

When the tire pressure check warning appears on a Mercedes-Benz, it indicates there may be an issue with the tire pressure. According to the international GBT2978-2008 standard, the recommended tire pressure for standard tires is 2.4-2.5bar. In winter, the tire pressure should be slightly increased by about 0.2bar based on the standard tire pressure. In summer, the tire pressure can generally be about 0.1bar lower than the standard to prevent tire blowouts due to high temperatures. There are generally three reasons for abnormal tire pressure in Mercedes-Benz vehicles: Abnormal tire pressure: The system will usually alert when the pressure is below 1.8bar or above 3.0bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring system not reset: If the tire pressure is not reset after inflating the tires, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.

14

1

Share

Which model is the Geely FE-7?

Geely FE-7 is the hatchback version of the Emgrand EC-7. The Emgrand EC7 comes with two powertrain options: The 1.8L model is still equipped with Geely's self-developed GETEC JLγ-4G18 CVVT all-aluminum engine, featuring CVVT (Continuously Variable Valve Timing) technology. It delivers a maximum output power of 102kW and a peak torque of 172N·m, with a specific output reaching 57.2kW per liter. In terms of parameters, it achieves top-tier performance among domestic 1.8L engines in its class. The newly introduced 1.5L model is powered by a 1.5L DVVT engine, producing a maximum power of 80kW at 6000rpm and a peak torque of 135N·m at 4800rpm. This newly added 1.5L engine is the same as the one used in the New Vision 1.5 model, employing DVVT technology (Dual Variable Valve Timing system for both intake and exhaust). Emgrand EC7 fuel consumption: The 1.5L version of the Emgrand EC7 has a fuel consumption of 8.2L/100km. The 1.8L CVT version consumes 9.0L/100km, while the 1.8L MT version has a fuel consumption of 8.9L/100km.

2

Share

What Causes the Dynamic Turn Signal Failure in Volkswagen Vehicles?

Dynamic turn signal failure in Volkswagen vehicles may be caused by short circuits, faulty flasher relays, excessive contact gap, and other reasons. The details are as follows: Short Circuit: First, check whether the power line terminal of the flasher relay has electricity. If there is no electricity, check for a short circuit between the relay and the power source. If there is electricity, use a screwdriver to connect the two terminals of the flasher relay. If the turn signal lights up, it indicates a fault in the flasher relay, which should be replaced promptly. If it does not light up, inspect the flasher relay. Flasher Relay Fault: Open the cover of the flasher relay and check whether the coil and resistor are intact. If the resistor heats up but the contacts fail to close, press the movable contact. If the turn signal lights up at this point, it indicates a fault in the relay. Adjust the contact gap if it is too large. Excessive Contact Gap: If pressing the movable contact and closing the contacts does not light the turn signal, use a screwdriver to short-circuit the contacts. If the light turns on, it indicates oxidation of the contacts. If the turn signal still does not light, the issue may lie with the turn signal switch. Use a screwdriver to connect the power line of the turn signal switch to the left and right light line terminals separately. If the light turns on, it indicates a fault in the turn signal switch, which should be removed for repair or replacement.

13

4

Share

What is the braking distance of the Envision from 100 km/h to 0?

Envision's braking distance from 100km/h to 0 is 39 meters. Braking distance from 100 km/h: The braking distance when the vehicle speed is 100 km/h, the brake is fully applied, and the maximum braking force is achieved. Taking current small and compact cars as examples, the ideal braking distance from 100 km/h is approximately 36-40 meters. Buick Envision: The Buick Envision is positioned as a midsize SUV. The 2020 Buick Envision offers two powertrain options: a 2.0T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, and a 1.5T SIDI direct-injection turbocharged engine paired with a 7-speed DCG PLUS intelligent dual-clutch transmission. The former delivers a maximum power of 191 kW at 5500 rpm and a peak torque of 400 N·m between 3000-4000 rpm, achieving a 0-100 km/h acceleration time of 8.2 seconds and a combined fuel consumption of 8.8 liters per 100 km. The latter produces a maximum power of 124 kW at 5600 rpm and a peak torque of 250 N·m between 1700-4400 rpm, with a 0-100 km/h acceleration time of 10.3 seconds and a combined fuel consumption of 6.6 liters per 100 km. All models meet the stringent "China VI b" emission standards.

17

1

Share

How to Use the Baojun 510 Air Conditioning?

Is the Baojun 1.5T Engine a General Motors Product?

Where is the position light of Volkswagen Santana Vista?

What does it mean when Mercedes-Benz detects tire pressure loss?

Which model is the Geely FE-7?

What Causes the Dynamic Turn Signal Failure in Volkswagen Vehicles?

What is the braking distance of the Envision from 100 km/h to 0?

What is the introduction to Volvo engine models?

What hidden features can be unlocked in the Geely Binrui?

Does BMW have a jack?

Is the BMW 740 a C-Class Car?