How to use the automatic start-stop function in the Sylphy?

1 Answers
DeMatteo
07/29/25 12:37pm
The method to use the automatic start-stop function in the Sylphy is: press the automatic start-stop switch located on the center console. The automatic start-stop switch uses a mechanical button, and its main purpose is to save energy and reduce exhaust pollution. Turning off the automatic start-stop allows the driver to have better control of the vehicle. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, and curb weight 1188kg. The 2021 Nissan Sylphy is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122ps, maximum torque of 155nm, maximum power of 90kw, and is paired with a 5-speed manual transmission.
Was this review help?
3
2
Share
More Forum Discussions

What is the actual fuel consumption of the BYD Song Pro?

BYD Song Pro has a total of 3 models on sale, including the BYD Song Pro-2021-1.5T-Automatic Xiaoyun Edition Luxury, Premium, and Elite models, all equipped with a 185 horsepower engine, with an NEDC fuel consumption of 8.5L per 100 kilometers. The fuel tank capacity of different BYD Song Pro models is the same. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 185 horsepower engine have a fuel tank capacity of 63L, and the distance that can be covered with a full tank of fuel is 63/8.5*100=741km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
20
2
Share

Is it necessary to replace the car battery at a 4S store?

It is not mandatory to replace the car battery at a 4S store. The specific details are as follows: 1. Replacement location: You can replace the battery yourself or have it replaced at an auto repair shop. Batteries generally need replacement every 2-3 years. 2. Service life: The warranty period for a new car is usually three years or over 100,000 kilometers, while the lifespan of a car battery is approximately 3 years. Information about car batteries is as follows: 1. Car battery: Also known as a storage battery, it is a type of battery that works by converting chemical energy into electrical energy. 2. Classification: Batteries are divided into conventional batteries, dry-charged batteries, and maintenance-free batteries. The commonly referred-to car battery is a lead-acid battery, with a normal service life ranging from 1 to 8 years.
16
3
Share

Can You Shift to Neutral Without Pressing the Clutch?

Shifting to neutral requires pressing the clutch. Shifting to neutral essentially means disengaging the gear, so it can be done without pressing the clutch, but there are two negative consequences: 1. Consequence one: It will be more strenuous. 2. Consequence two: It can cause excessive wear on the synchronizer inside the clutch or even damage due to gear-shifting impact. Relevant information about the clutch is as follows: 1. Clutch: Located inside the flywheel housing between the engine and the transmission, the clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Function: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission.
20
0
Share

Is it okay to drive in sandals?

Driving in sandals is acceptable. The specific details are as follows: 1. No specific regulations: There are no explicit rules prohibiting driving in sandals. 2. High-heeled sandals are not allowed: However, sandals come in various types, and high-heeled sandals cannot be worn for driving. According to relevant laws, motor vehicle drivers are not allowed to drive barefoot, in slippers, or in high heels. Shoes unsuitable for driving and the reasons are as follows: 1. Types of shoes: High-top shoes, snow boots, thick-soled sports shoes, platform shoes, and crocs are also not suitable for driving. 2. Reasons: These types of shoes either restrict joint movement due to the coverage of the legs and ankles, reducing sensitivity and increasing the risk of rear-end collisions due to delayed braking, or they have a wide shape and soft soles, causing the foot to slip inside the shoe and leading to mistakes when stepping on the brake.
12
1
Share

Can a car pass the annual inspection after headlight modification?

According to China's 'Road Traffic Safety Law', no unit or individual may assemble motor vehicles or alter the registered structure, construction, or features of motor vehicles without authorization. A car can pass the annual inspection after headlight modification, but it must comply with the following regulations: 1. Brightness: The brightness of the headlights must be within the legally permitted range, with the low beam not less than 1050 lumens and the high beam not less than 1450 lumens. The light intensity during driving should not be less than 15000 CD. 2. Color: The color of the headlights cannot be changed. 3. Angle: The angle of the headlights must also be correct. 4. Color temperature: The color temperature is restricted and must not exceed 6000K.
7
2
Share

Should New Tires Be Installed on the Front or Rear?

The installation position of new tires should be determined based on the following conditions: 1. According to the driving method: For front-wheel drive vehicles, new tires should be placed on the front, as the front wheels bear high workloads. For rear-wheel drive vehicles, new tires should be replaced on the rear, as power output is at the rear wheels, which are prone to slipping and similar phenomena. 2. According to the driving environment: If you often drive in high-speed environments, tires should be placed on the front. Relevant information about car tires is as follows: 1. Car tires: They are one of the important components of a car, directly in contact with the road surface. 2. Functions: Together with the car suspension, they cushion the impact during driving, ensuring good ride comfort and smooth driving; ensuring good adhesion between the wheels and the road surface; improving the car's traction, braking, and off-road capability; bearing the weight of the car.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.