How to use the automatic rain-sensing wipers on the Nissan Qashqai?
3 Answers
First, insert the key into the ignition and turn it to start the vehicle. Pull the lever toward the driver to activate the wipers. The front wipers will spray washer fluid onto the windshield. Pushing the lever up once will make the wipers sweep once. The middle position is the intermittent mode, where the wipers operate at a set frequency. The adjustment button on the right controls the frequency. When the lever is pushed downward, the operating frequency increases. When the switch is moved to the OFF position, the front wipers will turn off. The right side is the control area for the rear wiper. Rotate the switch to the corresponding position to activate it. Pushing the lever toward the front of the vehicle will spray washer fluid for the rear wiper.
Using the automatic rain-sensing wipers on the Nissan Qashqai is quite convenient. I often use this feature while driving. After starting the vehicle, simply toggle the wiper control stalk on the right side of the steering wheel to the position marked AUTO. It will then automatically detect rainfall via the sensor at the top of the windshield. When it rains, the wipers activate on their own, adjusting the wiping speed based on the intensity of the rain. Sensitivity can be adjusted on the stalk—usually via a small rotary dial. Turning it clockwise increases sensitivity, while turning it counterclockwise lowers it. I prefer setting it to medium to avoid overly aggressive responses during light rain. When parking outdoors in summer, remember to regularly clean the sensor area to prevent dust or leaves from obstructing it, which could affect accuracy. On highways, this feature is a lifesaver, allowing me to focus on driving without worrying about manual operation errors. Every time I wash the car, I also wipe the windshield sensor to maintain system stability.
Operating the Qashqai's automatic wipers is straightforward, and I recommend doing it step by step. After starting the engine, move the wiper control stalk next to the steering wheel to the AUTO position to activate the sensor function. The sensitivity adjustment is integrated into the stalk, with dedicated buttons or knobs to set it higher or lower. When using it, ensure the sensor on the windshield remains clean; if it gets dirty and triggers false detection, gently wipe the surface with a soft cloth. During daily driving, if the wipers don't activate automatically in heavy rain, check whether the fuse is intact or if the sensor is obstructed. Pay extra attention to this during seasonal maintenance to prevent malfunctions. You can also customize preferences via the central control screen, such as overcast mode, but avoid frequent adjustments to conserve battery power. Overall, it's a smart tool—once mastered, it ensures worry-free driving in all weather conditions.
