How to use the automatic parking feature on the Mercedes-Benz C260L?
4 Answers
How to use the automatic parking feature on the Mercedes-Benz C260L: 1. Ensure the parking assist is activated and drive at a speed below 30km/h. At this point, a 'P' within a square will appear below the external temperature display on the dashboard; 2. By default, it is set for right-side parking. Drive close to the right side of the road. When the front of the car passes an empty parking spot, if the conditions for parking are met, an arrow will appear to the right of the 'P' within the square. Gently press the brake to bring the car to a stop; 3. Shift into reverse gear. A prompt to confirm the surroundings will appear. Press OK and follow the instructions to reverse. A beep will sound once the car is in position; 4. Follow the instructions to turn the steering wheel in place, then shift into P gear.
The automatic parking feature on the Mercedes-Benz C260L is quite convenient. I've tried it a few times before. After starting the vehicle, press the parking button on the center console to activate the system, then drive forward slowly, keeping the speed below 30 km/h. The system will automatically scan for parallel or perpendicular parking spaces. A prompt will appear on the dashboard indicating a spot has been detected—confirm the direction with a tap, and the system will then instruct you to release the steering wheel. Shift into reverse, and the car will handle the steering, acceleration, and braking to complete the parking, all very smoothly. However, be aware that the parking lines need to be clear—rain or obstacles can cause the system to fail, so I always stay alert to my surroundings just in case. For first-time users, I recommend practicing in an empty parking lot rather than trying it in crowded areas. The benefit is reduced stress and avoiding scratches, but don’t rely on it entirely—keep your hands ready to take over if needed. Overall, the feature is useful but should be used safely.
To put it simply, the automatic parking feature in the Mercedes-Benz C260L is activated by pressing the P button after starting the car. Drive slowly to search for a parking space. Once detected, the system will prompt you to choose a direction. After confirmation, it starts working: you shift into reverse or drive, and it steers itself to park. I've seen many owners use it effectively, but issues like dirty sensors or failure in rainy conditions are common. Remember to regularly clean the camera and radar positions for maintenance. Keep the speed low, not exceeding 30 km/h. Stay focused during operation, and don't keep your hands off the steering wheel for too long to avoid accidents. If the system malfunctions, rely on experience to judge—turn it off and retry or manually intervene. Be extra cautious in low-light conditions, and after parking, check if the wheels are aligned to prevent misalignment and scraping. This feature is practical for both beginners and experienced drivers—practice in an open area first to get familiar with it before using it regularly.
When driving and encountering the automatic parking feature of the Mercedes-Benz C260L, I simply press the parking button to activate the system, then drive slowly to let it scan for parking spaces on the road or in the parking lot. Once a spot is detected, I confirm on the screen, shift into reverse, and the car parks itself—steering and moving forward are all automatic. During the process, I can take my hands off the wheel, but I stay alert. The system uses radar and cameras to determine the position, which works well, though it may falter in poor lighting or rain. I find it saves effort and time, especially helpful for parallel parking. However, remember not to drive too fast, clear any obstacles around before parking, and be ready to manually intervene if the system fails to activate properly. In short, the feature is thoughtful, but don’t rely on it too lazily.
