How to use the automatic parking feature in the new BMW 3 Series?

What is the difference between throttle cleaning and intake system cleaning?

The differences between cleaning the automobile intake system and cleaning the intake manifold are: 1. Different cleaning complexity: (1) Intake system: It is necessary to first clean the throttle, then the intake pipe, and finally the valve chamber. (2) Intake manifold cleaning: Directly clean the intake manifold. 2. Different cleaning parts: (1) Intake system: Corresponding cleaning of the three main parts related to the intake. (2) Intake manifold cleaning: Only clean the intake manifold. 3. Different cleaning agents used: (1) Intake system: Use valve chamber cleaner, intake passage cleaner, and throttle cleaner. (2) Intake manifold cleaning: Only intake passage cleaner is needed.

5

2

Share

How Often Should a Toyota Highlander Be Serviced?

An oil change service is required approximately every 5,000 kilometers. If using full synthetic oil, the service interval can be extended to around 7,500-8,000 kilometers. Vehicle minor and major services are as follows: 1. Minor service intervals: The timing for a minor service depends on the effective duration or mileage of the engine oil and oil filter used. The validity periods vary for different brands and grades of mineral oil, semi-synthetic oil, and full synthetic oil. Always follow the manufacturer's recommendations. Oil filters generally come in two types: standard and long-life. Standard oil filters are replaced together with the oil, while long-life filters have a longer service duration. 2. Major service intervals: Major services are based on minor services, typically alternating between these two maintenance types. The intervals vary by vehicle brand, so always refer to the manufacturer's guidelines.

19

3

Share

What Causes the Rattling Sound at Motorcycle Idle That Disappears When Clutch is Engaged?

Reasons for the rattling sound at motorcycle idle that disappears when clutch is engaged: Timing chain elongation, tensioner pressure loss, balance shaft wear: Timing chain elongation is generally caused by metal fatigue. After prolonged riding combined with the high-temperature operating environment of the timing chain, elongation easily occurs, leading to abnormal noises. The tensioner is connected to the oil passage and adjusts the timing chain tightness through oil pressure. If the tensioner's oil passage is blocked or its internal check valve loses pressure, the chain will loosen and produce noise. The balance shaft reduces vibrations generated during engine operation. If the balance shaft oil passage becomes blocked, it will increase wear on the journal and bearings, causing abnormal sounds. Camshaft, crankshaft, connecting rod bearing wear: If the vehicle uses inferior engine oil, excessive sludge may form and block the lubrication passages, preventing oil from reaching components that require lubrication and cooling. This will cause wear on the camshaft, crankshaft, and connecting rod bearings, resulting in noise. Additionally, if the engine lacks coolant, causing excessively high temperatures, the above phenomena may occur. In severe cases, it may lead to cylinder scuffing or bearing seizure. Increased variable timing gear clearance: Variable valve timing adjusts according to engine speed and operating conditions, typically using hydraulic pressure to control the internal rotor of the camshaft timing gear, achieving a certain degree of advance or delay. If the internal rotor of the variable timing gear becomes stuck or the oil chamber wears, the clearance will increase, causing noise. Excessive valve clearance, rocker arm damage: The rocker arm is the lever mechanism that presses on the valve, while the valve clearance is primarily controlled by the hydraulic lifter. Damage to either component will cause valve noise.

8

4

Share

What is the difference between car crystal coating and waxing?

The differences between crystal coating, film coating, and waxing are as follows: 1. First, there is a difference in price: waxing has the lowest cost, film coating is more expensive, and crystal coating is moderately priced. 2. There is also a difference in the duration of protection: waxing lasts the shortest, about 1 month; film coating lasts longer, around 6 months; while crystal coating lasts the longest, up to 1 year. Additional information: The primary function of waxing is waterproofing and protection against acid rain. Due to the protection of car wax, the amount of water droplets adhering to the car body is significantly reduced, with an effectiveness of 50% to 90%. It also protects against high temperatures and UV rays, prevents static electricity, and of course, dust. At the same time, it makes the car body look newer.

4

1

Share

Is Wheel Alignment Necessary After Tire Rotation?

Tire rotation generally requires a subsequent wheel alignment. It is essential to perform tire rotation in accordance with the vehicle maintenance schedule, especially after the initial break-in period of a new car, as it significantly impacts tire longevity. Therefore, timely tire rotation as specified by the vehicle manufacturer is crucial for extending tire lifespan. Here is more information about wheel alignment: 1. Purpose of Wheel Alignment: Wheel alignment adjusts the four wheels' parameters to ensure optimal driving performance and reliability. 2. Situations Requiring Wheel Alignment Include: (1) Before annual vehicle inspection. (2) When a new car reaches 3,000 kilometers. (3) Every six months or when the vehicle reaches 10,000 kilometers. (4) When replacing steering system components.

1

5

Share

Is the Purchase Tax Calculated Based on the Naked Car Price?

Whether the purchase tax is calculated based on the naked car price depends on the situation. 1. When the naked car price is lower than the minimum tax price in the national tax system, it is submitted according to the minimum tax price. 2. When the naked car price is higher than the minimum tax price in the national tax system, it is submitted according to the naked car price. Here is some extended information: 1. The calculation method for vehicle purchase tax is based on the "minimum tax price". 2. The legal basis is Article 9, Paragraph 5 of the "Vehicle Purchase Tax Collection and Management Measures": For vehicles for which the State Taxation Administration has not determined a minimum tax price, the tax price is the price indicated in the valid price proof provided by the taxpayer. If the price indicated in the valid price proof is significantly low, the competent tax authority has the right to determine the tax price of the taxable vehicle.

4

5

Share

How to use the automatic parking feature in the new BMW 3 Series?

What is the difference between throttle cleaning and intake system cleaning?

How Often Should a Toyota Highlander Be Serviced?

What Causes the Rattling Sound at Motorcycle Idle That Disappears When Clutch is Engaged?

What is the difference between car crystal coating and waxing?

Is Wheel Alignment Necessary After Tire Rotation?

Is the Purchase Tax Calculated Based on the Naked Car Price?

What does the fraction in the specification model of a socket wrench represent?

What Causes a Motorcycle's Malfunction Light to Illuminate and Prevent Starting?

How Long Does It Take for an Overheated Engine to Cause Cylinder Scoring?

Are Motorcycles Licensed at the Vehicle Management Office?