How to Use the Automatic Parking Feature in Haval F7?

1 Answers
BennettRose
07/30/25 9:02am
Haval F7's automatic parking feature is used as follows: The automatic parking button is located on the panel below the center console. When the car is traveling at less than 30 kilometers per hour, press the automatic parking button. The letter "P" will appear on the dashboard display, indicating that the automatic parking system has been activated. More information about the car's automatic parking feature is as follows: 1. The Haval F7's automatic parking assist system identifies suitable parking spaces through sensors and automatically controls the vehicle's steering system, allowing the driver to park without operating the steering wheel. The driver only needs to follow the prompts on the instrument panel to maneuver the vehicle into the parking space. 2. Different automatic parking systems use different methods to detect objects around the car. Some cars are equipped with sensors around the front and rear bumpers, which can act as both transmitters and receivers. These sensors send signals that reflect back when they hit obstacles around the car. The onboard computer then uses the time it takes to receive the signals to determine the position of the obstacles.
Was this review help?
14
3
Share
More Forum Discussions

Which mode of Song Pro is the most fuel-efficient?

Song Pro's Eco mode is relatively fuel-efficient. Song Pro has three driving modes: Eco mode (econ), Sport mode (sport), and Normal mode (normal). Introduction to BYD Song Pro: BYD Song Pro models: BYD Song Pro offers three different types of drivetrains: fuel-powered (Song Pro Fuel), plug-in hybrid (Song Pro-DM), and pure electric (Song Pro-EV). Power: Song Pro is equipped with a 1.5T-185 horsepower-L4 engine and a 7-speed wet dual-clutch transmission. After new tuning, the maximum power is increased to 136kW, and the maximum torque is increased to 288Nm, meeting the China VI emission standard. Safety: Song Pro is equipped with L2-Plus intelligent driving assistance technology, capable of achieving about 20 driving assistance functions such as adaptive cruise control, lane departure warning, lane keeping, blind spot monitoring, etc. It is also equipped with an intelligent electric tailgate, seat heating and ventilation, and a PM2.5 Green Air Quality Intelligent Optimization System.
9
0
Share

How to Remove Formaldehyde Odor in a New Car?

Methods to remove formaldehyde odor in a new car include: 1. Develop the habit of driving with windows slightly open to maintain fresh air circulation inside the car and accelerate the dissipation of formaldehyde; 2. Use activated carbon to adsorb formaldehyde; 3. Utilize an air compressor to atomize and spray solvent inside the car; 4. Use Water Core for disinfection inside the car; 5. Visit a car maintenance center for negative ion odor removal service. The hazards of formaldehyde in cars are: 1. Formaldehyde can irritate the skin and mucous membranes, bind with proteins, and cause severe respiratory irritation and edema, eye irritation, and headaches; 2. Formaldehyde can lead to allergic dermatitis, pigmentation, necrosis, and excessive formaldehyde levels in the car can induce bronchial asthma; 3. It may cause nasopharyngeal tumors; 4. Prolonged inhalation of formaldehyde by pregnant women can result in fetal malformation or death, while prolonged inhalation by men can lead to sperm malformation or death.
2
1
Share

How much horsepower does the Toyota Prado 2700 have?

Toyota Prado (also known as Land Cruiser Prado) has a maximum power output of 120 kW (163 horsepower) at 5200 rpm. Relevant explanations are as follows: 1. Introduction: The 2700 off-road vehicle is the latest 2.7L model in the Toyota Land Cruiser Prado series. This newly developed next-generation SUV has a maximum power output of 120 kW (163 horsepower) at 5200 rpm. 2. Configuration: The Toyota Prado 2700 is equipped with a newly developed Toyota 4-cylinder electronic fuel injection 2TR-FE engine, with a displacement of 2694cc, excellent dynamic performance, and exhaust emissions that comply with the latest Euro III standards, making it highly environmentally friendly. The Prado (Land Cruiser Prado) off-road vehicle is configured with a newly developed Toyota 4-cylinder electronic fuel injection 1GR engine, with a displacement of 2,694cc, offering good dynamic performance.
18
1
Share

What grade of gasoline should the Tank 300 use?

The Tank 300 requires 92-octane gasoline, which is the recommended grade specified in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find it indicated on the fuel tank cap. Long-term use of the wrong gasoline grade can have the following effects: Using a higher octane gasoline in a vehicle designed for lower octane will not cause damage, but the increase in octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. Using a lower octane gasoline in a vehicle designed for higher octane can cause engine knocking. This occurs because the significantly lower octane rating reduces the fuel's ignition point, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires, it creates resistance during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is mild, it may only increase noise without significant engine damage. However, if the knocking is severe, it indicates serious engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, lead to cylinder scoring.
2
0
Share

Where is the key induction for Zhonghua Junjie FSV?

Zhonghua Junjie FSV key induction is located at the door. Here are the relevant introductions: 1. Appearance: The overall shape of Zhonghua Junjie FSV combines the charm of Eastern and Western aesthetics, with smooth and graceful curves extending from the front to the rear. The innovative high waistline design with artistic beauty is more in line with international styling trends, adding fashionable and dynamic elements to the vehicle. The body dimensions of 4510mm×1758mm×1460mm ensure spacious interior space, while the 2580mm wheelbase reaches the level of a B-segment car. 2. Interior: As a family-oriented sedan, Zhonghua Junjie FSV still focuses on providing a comfortable riding environment. The "black + beige" interior color scheme is warm and harmonious. The interior adjustments mainly focus on the position changes of the buttons on the center console. The optimized center console panel is more in line with Chinese aesthetics. 3. Powertrain: The main model is the 1.5L variant. In this displacement, except for the lowest-equipped manual comfort model, all other models are equipped with the Mitsubishi 4A91S engine. The engine has a maximum power of 77Kw (approximately 105Ps) and a maximum torque output of 141N·m, which can meet the needs of daily driving.
13
5
Share

Where is the Subaru Forester's catalytic converter located?

The Subaru Forester's catalytic converter is located in the exhaust pipe. The catalytic converter transforms harmful gases emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation-reduction reactions. Modern vehicles are all equipped with catalytic converters. Only older vehicles produced before emission standards reached China's National II standard lacked catalytic converters. Composition of a catalytic converter: A catalytic converter typically consists of four main components: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale from peeling off, which could clog the substrate. The vibration damping layer is composed of gaskets or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibrations, thermal deformation, and other factors, the gasket is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is constructed from honeycomb-shaped ceramic materials, though many are also made from metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.