How to Use the Auto Start-Stop Function in the Nissan Sylphy?

2 Answers
Craig
09/07/25 4:16am
The auto start-stop switch in the Nissan Sylphy is located at the front of the vehicle's center console, and the overall switch is mechanical. Below are the steps to use the auto start-stop function in the Nissan Sylphy: 1. When the vehicle is in motion, the auto start-stop switch is turned on by default. 2. Press and hold the auto start-stop switch to manually turn off the auto start-stop function. Here are some precautions when using the auto start-stop function: 1. When driving on slow-moving or congested roads, it is advisable to manually turn off the auto start-stop system to avoid potential vehicle damage. 2. While using the auto start-stop function, the driver needs to press the brake pedal firmly. The vehicle will automatically shut off when the brake is fully pressed and will restart when the brake is released and the accelerator is pressed. Drivers should adapt to this feature accordingly.
Was this review help?
13
1
Share
PatrickAnn
09/19/25 3:39am
The automatic start-stop feature in the Sylphy is quite simple to use. After starting the engine upon entering the car, the system is usually enabled by default, and a green auto start-stop icon on the dashboard confirms it's active. When stopping at a red light, firmly press the brake, and the car will automatically shut off the engine; when the light turns green, gently press the accelerator, and the engine restarts instantly—the whole process is smooth with almost no noticeable delay. Over time, I've found it particularly fuel-efficient, especially in heavy traffic where it saves a lot on fuel costs. However, one thing to note is that when the air conditioning is on, if the engine shuts off, the cold air might stop briefly, which can be a bit uncomfortable in summer. In such cases, I recommend manually turning it off using the button, typically located below the steering wheel or on the center console—press it once, and the light goes off to deactivate it. New drivers can try it gradually and keep it enabled once accustomed, which is also good for the environment.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What Are the Consequences of Forgetting to Engage the Handbrake When Parking?

Forgetting to engage the handbrake when parking can easily lead to a vehicle rollaway accident. The handbrake is used to brake the vehicle when parking on flat ground or slopes, preventing the car from moving automatically when unattended and avoiding traffic accidents. Here are some precautions for using the handbrake: 1. When stuck in traffic on a slope, remember to engage the handbrake: Maintain a certain distance from other vehicles during daily driving. If the car starts to roll backward, immediately take corrective measures such as stepping on the foot brake and engaging the handbrake. 2. Driving with the handbrake engaged causes significant brake wear: Develop proper driving habits. Before driving, check if the handbrake has been released. Always monitor the dashboard for information and pay attention to warning lights to avoid driving with the handbrake engaged.
9
2
Share

Can a new car drive on the highway after 1000 kilometers?

A new car can drive on the highway after 1000 kilometers. During the break-in period, try to avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. Avoid excessive load during the break-in period: Running a new car at full load during the break-in period can damage the components. Therefore, within the first 1000 kilometers of driving, the load should generally not exceed 75-80% of the rated capacity. Speed on the highway: Driving long distances on the highway during the break-in period increases the continuous working time of the engine, which can lead to increased wear on components. It is recommended to maintain a speed of 120 km/h with the engine RPM not exceeding 3000. If the RPM exceeds 3000, consider reducing the speed to keep it within 3000 RPM. During long-distance driving, take a break for about ten minutes when passing service areas.
1
4
Share

Differences Between Motorized Bicycles and Gasoline Motorcycles

Differences between motorized bicycles and gasoline motorcycles are as follows: Gear differences: Motorized bicycles do not have gears, while motorcycles have clear gear distinctions, resulting in much greater horsepower than motorized bicycles. Differences in power operation methods: Motorcycles typically use 2-stroke engines, which have two sets of up-and-down piston movements inside the cylinder, generating powerful momentum; whereas motorized bicycles' cylinders do not have piston movements, relying purely on gasoline combustion for power, hence they are continuously variable transmission with very limited power. Differences in road requirements: Motorcycle driving requires a license plate, as well as a driver's license and vehicle registration, while motorized bicycles that meet the "Gasoline Engine Assisted Bicycle" standard do not need to go through the procedures for licensing and obtaining a driver's license.
19
4
Share

Does the left rearview mirror of a car have a blind spot?

The left rearview mirror of a car does have a blind spot, located approximately 2 meters behind the vehicle on the left side. Here are some methods to address the blind spot in the left rearview mirror: Install a wide-angle rearview mirror: This type of wide-angle mirror is attached to the edge of the left and right rearview mirrors, significantly reducing blind spots and generally meeting the needs for overtaking and lane changes. Installing such a wide-angle mirror is the simplest and most convenient way to eliminate blind spots. Adjust the left rearview mirror properly: When adjusting the left rearview mirror, ensure that the ground and sky each occupy half of the mirror's surface, with the car body taking up one-quarter of the mirror. The remaining three-quarters should provide a clear view of the road conditions. Use peripheral vision to check for vehicles or pedestrians: While driving, glance at the rearview mirror every few minutes. Simultaneously, use your peripheral vision to scan the right rear window to observe the surroundings of the vehicle. This practice ensures safe overtaking and lane changes, helping to prevent accidents.
5
2
Share

Why do some cars have antennas on the roof while others don't?

Some cars have antennas on the roof while others don't because some vehicles use hidden antennas, making them invisible from the outside. The specific reasons why some cars have antennas on the roof while others don't are as follows: Use of hidden antennas: Cars without visible antennas on the roof employ hidden antennas, which are built into the vehicle. For example, many cars have red lines printed on the rear windshield—these lines serve as printed antennas. Additionally, some cars feature a small shark-fin-like structure on the roof, which is another type of hidden antenna. Benefits of hidden antennas: Reduced wind resistance: Traditional external antennas, due to their large size, can disrupt airflow during driving as they sway, which may affect the car's performance; Theft prevention: Older external roof antennas, while effective, were prone to theft since they were exposed outside the vehicle, causing significant inconvenience and financial loss to owners; Extended lifespan: External antennas were susceptible to rust from prolonged exposure to the elements, whereas built-in designs effectively avoid this issue.
19
5
Share

Can a new car be serviced at another 4S dealership?

A new car can be serviced at different 4S dealerships of the same brand. Daily vehicle maintenance is performed by the driver before, during, and after driving. Before driving, one should inspect the car to check if the lighting devices are damaged, if the body is tilted, if there are any leaks such as oil or water, and examine the condition of the tires, doors, engine hood, trunk lid, and windows. Things to note when visiting a 4S dealership: Verify vehicle information: This mainly includes the vehicle repair unit (driver's name), license plate number, engine number, chassis number, entry time, and exit time (settlement time). The key details are the engine number and chassis number. The driver should carefully compare these numbers with those on the vehicle registration certificate to prevent clerical errors by the settlement staff. Otherwise, in case of an accident, it may lead to difficulties in filing complaints. Try to reclaim replaced parts: The parts list details which components were replaced during the current maintenance service and their respective prices. The driver should check whether the listed parts exceed the scope of those that needed replacement in the maintenance project. Additionally, one can choose to reclaim the replaced parts whenever possible.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.