How to use the auto hold function in the Tiguan L?

What to Do If Your License Plate Washed Away in Heavy Rain?

Carry the vehicle owner's ID card and other documents for the traffic police to trace the vehicle number. Pry off the remaining license plate, then fill out two forms and submit them along with the plate at the license plate replacement window. Receive a temporary vehicle license plate and replacement procedures. Before the temporary plate expires, visit the DMV with it to collect a new set of replacement license plates.

9

2

Share

How to Adjust the Front and Back Position of Volkswagen Car Seats?

First, adjust the distance between the seat and the pedals. When pressing the brake pedal all the way down with your right foot, ensure that your knee has a bend of approximately 120 degrees. Adjust the seat back to ensure that the angle between your body and legs is greater than 90 degrees, with your shoulders firmly against the seat.

9

5

Share

What is the car starting voltage?

12V vehicle systems should have a voltage between 13.5-14.5, while 24V vehicle systems should be between 27V-29V. Below is an introduction to the relevant content: 1. 12V vehicle systems: The battery voltage should be around 13V when unloaded, and no less than 11V under load to be considered normal. If it's lower than this voltage, starting may be difficult. For 24V vehicle systems, the battery voltage should be around 26V when unloaded, and no less than 22V under load to be considered normal. If it's lower than this voltage, starting may be difficult. 2. Engine voltage: After starting the car, the voltage should generally be between 13.4V-14.8V. If it's below 13.4V, the battery may not be charging properly, so check the engine or other electrical loads. When the voltage exceeds 14.8V, it may damage the battery, so check the engine stabilizer.

6

3

Share

What Are the 13 Hidden Functions of the Camry?

The 13 hidden functions of the Camry are: auto-dimming rearview mirror when reversing, parking ventilation and heating system, seat belt alarm, tire pressure monitoring, modified automatic headlight switch, RS startup screen, daytime running lights, lock sound, eco-driving mode, background lighting, LED brightness adjustment, and high-speed braking double flash. Below are specific details about the Camry: Exterior: The new Camry still offers two exterior styles: standard and sport. However, compared to the previous model, some details have been adjusted, making it look more sporty and youthful. Additionally, the new model introduces a new titanium silver body color option. Interior: The overall design and style of the new Camry remain unchanged, but the original embedded multimedia screen has been replaced with a 10.1-inch floating touchscreen, and the air vents have been relocated below the screen. The instrument cluster has also been upgraded to a 12.3-inch full LCD display.

15

5

Share

Does Replacing the Windshield Affect Resale Value?

Replacing the front windshield may cause a certain degree of depreciation, but there's no need to worry too much about it. Since the front windshield is a vulnerable component, although the car's resale value might be slightly lower after replacement, the overall impact is not significant. However, it is important to ensure the windshield is replaced correctly. Improper installation can lead to safety hazards and further affect the car's resale value. Here are some methods for dealing with windshield scratches: 1. Polishing Removal: Small, shallow scratches can be removed by polishing. However, it's best if the scratches are not in the driver's line of sight, as polishing may cause glass wear, and larger areas could affect visibility. For safety reasons, it is recommended to replace the windshield directly. 2. Windshield Scratch Repair Agent: Slowly apply the gel along the scratch, being patient to avoid unevenness, which can be especially noticeable in sunlight. Note that windshield repair agents are only suitable for minor scratches. For more severe damage, it is advisable to seek professional repair at an auto beauty shop or 4S store.

9

4

Share

What to Do When Engine Noise Increases After an Oil Change?

Increased engine noise after an oil change is a common issue, often caused by overfilling the engine oil. This can lead to greater resistance during crankshaft rotation, resulting in reduced engine power and altered air-fuel ratios in the combustion chamber, which increases the likelihood of knocking and consequently raises noise levels. Here’s some relevant information about engine oil: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and wear reduction, aiding in cooling, sealing against leaks, preventing rust and corrosion, and acting as a shock absorber. It is often referred to as the "blood" of a car. 2. Composition: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives are used to compensate for and enhance the performance shortcomings of the base oil, providing additional beneficial properties. Additives are a crucial part of lubricants.

19

3

Share

How to use the auto hold function in the Tiguan L?

What to Do If Your License Plate Washed Away in Heavy Rain?

How to Adjust the Front and Back Position of Volkswagen Car Seats?

What is the car starting voltage?

What Are the 13 Hidden Functions of the Camry?

Does Replacing the Windshield Affect Resale Value?

What to Do When Engine Noise Increases After an Oil Change?

How to resolve Volkswagen U111100 fault code?

What are the dimensions of a parallel parking space?

How to Deal with Leaking Air Conditioner Valve Core in Cars?

How to judge whether you can reverse into the parking space?