How to use the auto hold button on Lavida Plus?

1 Answers
CeciliaLee
07/30/25 10:03am
Usage method of the auto hold button on Lavida Plus: Press the auto hold button in the car to activate it. At this time, there is no need to step on the brake pedal or pull the handbrake. The system will automatically brake the vehicle. When the accelerator pedal is pressed, the system will automatically release. The following are the functions of the auto hold system: 1. When encountering situations such as traffic lights that require a short stop, the system will automatically brake the wheels after the vehicle stops to prevent rolling. 2. When starting on an uphill slope, the system will automatically brake to prevent rolling back. After starting, the system will automatically release the wheels and move forward directly. 3. When parking and locking, there is no need to pull the handbrake. The system will automatically brake the wheels at this time, but this is only available in some models.
Was this review help?
8
1
Share
More Forum Discussions

How often should the battery of a Volkswagen Jetta be replaced?

The battery of a Volkswagen Jetta should be replaced every four years. Replacement is necessary when the battery's internal resistance and voltage fail to meet the specified values. When the engine is not running, the battery supplies power to all electrical devices in the car and is responsible for starting the engine. After the engine starts, it powers all electrical devices in the car and also charges the battery. As the number of charge and discharge cycles increases, the battery's storage capacity decreases, hence the need for regular replacement. The Volkswagen Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., equipped with two engines: a 1.4-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. The 1.4-liter naturally aspirated engine has a maximum power of 90 horsepower and a maximum torque of 132 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque at 3,800 rpm. The 1.5-liter naturally aspirated engine has a maximum power of 110 horsepower and a maximum torque of 150 Nm, with the maximum power achieved at 6,000 rpm and the maximum torque at 3,800 rpm.
3
5
Share

Which Technology is Used in Autonomous Driving?

Autonomous driving itself is a technology, which is divided into several levels, each with different principles and technologies employed. Autonomous driving requires four steps to complete: information collection, analysis and recognition, action decision-making, and device control. Below is a detailed description: 1. Autonomous Driving System: The system utilizes advanced communication, computer, network, and control technologies to achieve real-time and continuous control of trains. Using modern communication methods, it directly interfaces with the train, enabling bidirectional data communication between the train and the ground. This ensures fast transmission rates and large data volumes, allowing subsequent tracking trains and control centers to promptly obtain the exact position of the leading train. This makes operation management more flexible, control more effective, and better suited to the needs of train autonomous driving. 2. Main Functions of the Autonomous Driving System: The primary functions include bidirectional information transmission between the ground and the train, as well as comprehensive operation organization and emergency handling. The ground-train information transmission channel is a crucial component of the automatic train operation control system. The onboard equipment of the automatic control system relies entirely on operational control commands received from the ground control center. It continuously monitors the train's actual speed and the ground's permitted speed instructions. If the train speed exceeds the ground speed limit, the onboard equipment will implement braking to ensure the train's operational safety.
15
3
Share

What are the safety features of the Volkswagen Lavida?

The safety features of the Volkswagen Lavida include: driver and front passenger airbags, front side airbags, front and rear head airbags, tire pressure monitoring, seat belt reminder, ABS anti-lock braking system, brake force distribution, brake assist, traction control, electronic stability program, and autonomous emergency braking. The dimensions of the Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The Volkswagen Lavida is equipped with three engine options: a 1.2T, a 1.4T, and a 1.5L. The 1.2T engine delivers a maximum power output of 85 kW and a maximum torque of 200 Nm; the 1.4T engine delivers a maximum power output of 110 kW and a maximum torque of 250 Nm; the 1.5L engine delivers a maximum power output of 83 kW and a maximum torque of 145 Nm. It is paired with a 5-speed manual transmission, a 6-speed automatic transmission, or a 7-speed dual-clutch transmission. The front suspension of the Lavida uses a MacPherson strut setup, while the rear suspension uses a torsion beam non-independent suspension, and it features a front-engine, front-wheel-drive layout.
18
3
Share

What is the actual fuel consumption of Cadillac?

Cadillac's comprehensive fuel consumption (L/100km) is 7.8-8.2L/100km. Below are some common fuel-saving techniques: 1. Control RPM: Engine RPM affects the car's fuel consumption. Generally, the optimal RPM range for most cars is around 2200-2500. Maintaining a stable RPM helps avoid unnecessary fuel consumption. 2. Control Speed: Every vehicle has an economical speed range. Typically, small-displacement cars achieve lower fuel consumption at speeds between 60-80 km/h, while medium-displacement cars are more fuel-efficient at 80-100 km/h. 3. Gentle Acceleration: Vehicle acceleration is a high fuel-consumption phase. When starting, gently press the accelerator to achieve smooth acceleration. Once the car reaches a certain speed, resume normal driving. This reduces engine warm-up time and improves fuel efficiency. Aggressive acceleration not only damages the engine but also increases fuel consumption. 4. Reduce Braking: Frequent emergency braking during driving increases fuel consumption. When approaching intersections or going downhill, lift the throttle in advance to avoid unnecessary braking and subsequent fuel consumption spikes.
6
1
Share

Does the original three-way catalytic converter have a specified code?

Most three-way catalytic converters that are matched with the vehicle manufacturer are coded and packaged according to the requirements of the vehicle manufacturer. The original three-way catalytic converter does have a specified code. Currently, there are four main types of codes for three-way catalytic converters, namely DOC, DPF, SCR, and ASC, which represent different types of catalytic converters with varying efficiencies. DOC refers to the Diesel Oxidation Catalyst, which is the most common type of catalytic converter. DPF stands for the Diesel Particulate Filter, which is currently equipped in many China VI-compliant vehicles. SCR refers to Selective Catalytic Reduction, which generally requires the use of a urea injection system. ASC is the Ammonia Slip Catalyst, whose main function is to eliminate excess or escaping NH3. The letters on the three-way catalytic converter represent different types of catalytic converters. Common examples include DOC (Diesel Oxidation Catalyst), DPF (Diesel Particulate Filter), SCR (Selective Catalytic Reduction), and ASC (Ammonia Slip Catalyst). Different vehicle models require different catalytic converters to minimize exhaust pollution. For example, trucks generally use SCR (Selective Catalytic Reduction) catalytic converters, and when combined with a urea injection system, they can effectively reduce nitrogen oxides and particulate matter in diesel exhaust. Nowadays, SCR is often seen in diesel vehicles.
15
5
Share

Polishing or Waxing for Scratches?

Small scratches can be treated with wax. Polishing may directly damage the paint, while minor scratches only require waxing to maintain aesthetics. Below is an introduction to related content: 1. Fine hairline scratches: Even dust and sand particles in the air during high-speed driving can cause subtle hairline scratches on the car's paint surface. These can be observed as fine lines against the light but are usually imperceptible to the touch. Such hairline scratches can be easily removed with a wax containing fine-cut abrasives, such as mirror polish wax. The abrasives in these waxes are so fine, down to the nanometer level, that they won't harm the original protective layer of the paint. 2. Light scratches: Sometimes, mischievous children passing by might lightly scratch the car body with a key, leaving a noticeable mark on the paint. Upon closer inspection, the scratch feels very shallow, with only a slight indentation. This actually only damages the transparent layer of the paint. Using fine abrasive wax can repair such light scratches by rearranging the molecules of the surface paint, effectively moving paint from the surrounding area to fill in the scratch. 3. Moderate scratches: If the scratch is clearly visible and you can still feel the colored paint layer, the best approach is to take the car to a professional auto repair shop. Otherwise, further polishing may only result in more scratches.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.