How to use the air conditioning in the Tiguan L?

1 Answers
LeTaylor
07/29/25 6:14pm
Press the AC button on the front control panel to turn on the air conditioning, then adjust the fan speed button, and the air vents at the front of the car will blow cold air. Usage method: AC is the air conditioning switch, MAX means maximum, and the internal circulation can be manually turned on or off. By default, when the air conditioning is turned on to the maximum state (or when the temperature difference between the inside and outside of the car is relatively large), the internal circulation will automatically turn on; in other cases, it generally does not turn on automatically. Taking the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition as an example: 1. After starting the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition, wait for 5-10 minutes until the water temperature rises to normal temperature, then you can turn on the warm air. 2. Adjust the air conditioning circulation mode of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to internal circulation. 3. Set the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to warm air mode, which is the red zone. 4. Do not turn on the AC button of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition. 5. Adjust the air conditioning gear of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to a suitable level and adjust the direction of the air vents.
Was this review help?
15
1
Share
More Forum Discussions

How to Remove Water Stains from Car Seats?

First, use a damp cloth to moisten the area with water stains, allowing the stains to become wet. This will make it easier to clean them later. After about half an hour, spray car cleaner on the stained area and gently spread it with a brush. After rinsing off the water stains with clean water, apply a softening cream to the affected area of the car seat.
19
1
Share

How to Remove the Front Wiper Blade?

Gently lift the wiper arm upward in the direction of the wiper blade to move it away from the vehicle body. Locate the securing clip at the connection point between the wiper blade and the wiper arm. Finally, you can separate the wiper blade from the wiper arm. When replacing the wiper blade rubber, note that the hook is only on the side with the cap cover, not on the other side.
1
1
Share

How to Reset the Tire Pressure on a Porsche Macan?

Press the MENU button on the right-hand combination switch on the steering wheel with the ignition on to bring up the system settings main menu, and select Tire Pressure; Select the Settings option; Choose the tire - Winter tires "20Inch" (20 inches); Select "Sparewheel" (spare tire), "Sealingset" (tire repair setting); The instrument panel will display a prompt (confirm the tire repair setting), select "Yes" to successfully set the tire pressure.
1
1
Share

How to Deal with Flood-Damaged Total Loss Vehicles?

For losses caused by natural disasters such as heavy rain and floods, insurance companies will compensate according to the agreement; If a car is damaged by flooding while parked in a residential area or underground garage, the insurance company will compensate for it as a natural disaster. If the vehicle is waterlogged but the engine is not flooded, and only parts replacement or circuit repairs are needed, this falls under the coverage of the vehicle damage insurance.
15
0
Share

How to Improve Hard Car Suspension?

Methods to improve hard car suspension: 1. Reduce tire pressure - lowering tire pressure can help improve ride comfort to some extent, but be careful not to reduce it too much as this may damage the tires and pose safety risks to passengers; 2. Adjust or replace shock absorbers - consult professionals about replacing with softer shock absorbers where modifications are permitted, with coilover shock absorbers being a common option; 3. Use seat cushions - the direct effect of hard suspension is bumpy and uncomfortable rides, so using car seat cushions can help alleviate this to some degree.
5
2
Share

How to Deal with Paint Peeling on the Bumper?

You can go to a 4S shop and ask the paint technician for some original paint, then apply it to the peeling area yourself. Choose your favorite sticker and paste it on the area where the paint has peeled off, which not only covers the peeling part but also adds beauty to your beloved car. If the paint peeling on the bumper is severe, you can consider going to a car beauty salon and use methods such as polishing and waxing to repair it.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.