How to use the air conditioning in the Emgrand GL?

1 Answers
LeZoey
07/29/25 1:13pm
Steps to use the air conditioning in the Emgrand GL: 1. Press the AUTO button to turn on the automatic air conditioning; 2. Rotate the ACMAX button to adjust the temperature. Turn clockwise to increase the temperature. When the temperature is higher than the interior temperature, it indicates that the warm air is turned on. To switch to cold air, press the AC button. The Emgrand GL has a body size of 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. It is a 4-door, 5-seater sedan with a maximum horsepower of 141 and a maximum torque of 235 Nm, capable of reaching a top speed of 185 km/h.
Was this review help?
2
1
Share
More Forum Discussions

What is the battery life of the BAIC EX360?

The battery life of the BAIC EX360 is 600,000 kilometers. Here are some related introductions about automotive batteries: Precautions for battery replacement: Visually inspect the casing for cracks, corrosion, or signs of burning; use a voltmeter to measure the voltage between the casing and the ground, ensuring it does not exceed 20V, as higher voltages pose an electric shock risk; after installing a new battery, use Mercedes-Benz specialized software to perform a battery test run. Precautions for automotive battery maintenance: Avoid parking the car in open parking lots for extended periods. If long-term parking is necessary, remove and take the battery to prevent freezing damage; automotive batteries should be charged regularly. If left unused for a long time, the battery will gradually self-discharge and eventually become unusable. Therefore, start the car periodically to charge the battery.
18
3
Share

Should You Apply Throttle When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, you should not apply throttle as it increases fuel consumption. Instead, release the accelerator pedal. Gear Shifting Technical Requirements: Master the appropriate timing for gear shifts, meaning you should neither upshift too early nor downshift too late; the coordination between the clutch pedal, accelerator pedal, and gear lever must be correct and harmonious, with precise positioning; after engaging a new gear, release the clutch pedal promptly and smoothly. Manual Transmission Gear Shifting: For manual transmission vehicles, the importance of the clutch cannot be overlooked for smooth driving. Except for starting the car, shifting gears, and low-speed braking, which require pressing the clutch pedal, avoid unnecessarily depressing the clutch or resting your foot on the clutch pedal at other times.
6
0
Share

What Causes the Highlander's Anti-Theft Alarm to Sound Automatically?

Highlander's anti-theft alarm sounding automatically is due to wiring faults or excessive sensitivity. The solutions for wiring faults and excessive sensitivity are as follows: Solutions for wiring faults: Timely inspection, repair, or replacement is necessary. However, whether it's checking the wiring or replacing the alarm, it's best left to professionals, as this is beyond the scope of DIY solutions. Additionally, the system integrates many wiring distributions. If installed unprofessionally or if the wiring is reversed, the worst-case scenario could render the anti-theft device unusable or even burn out the vehicle's components. Solutions for excessive sensitivity: Locate the main unit of the anti-theft alarm, typically found under the steering wheel or behind the A-pillar trim panel. Then, slightly adjust the sensitivity adjustment knob. However, avoid setting it too low, as this would significantly reduce the vehicle's anti-theft effectiveness.
17
1
Share

What is the purpose of a spare tire?

The purpose of a spare tire is to replace a damaged, flat, or blown-out tire, allowing the vehicle to continue driving safely within a limited speed range to a repair facility. Spare tires refer to the backup tires for cars, usually matching the specifications of the original tires. However, some vehicles use spare tires with special-colored rims, compact spares, foldable spares, or run-flat tires to remind owners to promptly inspect and replace faulty tires. Spare tires typically have a lower maximum speed limit than standard tires, and it is advisable to replace them with standard tires as soon as possible after reaching the destination. This is often indicated with prominent multilingual labels. Depending on the vehicle model, spare tires are usually placed in one of the following locations: under the trunk floor, mounted beneath the rear of the car, or attached to the exterior of the trunk door. For SUV models, spare tires are mostly mounted beneath the rear or attached to the exterior of the trunk door. Types of spare tires: Full-size spare tire: A full-size spare matches the specifications of the other four tires and can replace any temporarily or permanently unusable tire. Non-full-size spare tire: This type of spare has a slightly smaller diameter and width compared to the other four tires. It can only be used temporarily, must be installed on non-drive wheels, and has a maximum speed limit of 80 km/h. Run-flat tire: Also known as a safety tire (run-flat tire), these are commonly referred to as "anti-blowout tires" or, more accurately, "tires that can run while flat." Unlike regular tires, run-flat tires do not lose air or lose it very slowly when punctured, maintaining their shape and keeping the tire bead securely on the rim. This allows the car to continue driving for an extended period or temporarily to a repair station. Vehicles equipped with these tires do not need to carry a spare tire, effectively integrating the spare function into the four main tires. Precautions: Regular inspection: Check tire pressure, wear, and cracks. Replace tires before the tread wears down to the wear indicator line.
1
0
Share

What type of engine oil is suitable for the Volkswagen New Santana 1.6?

Volkswagen New Santana 1.6 uses semi-synthetic engine oil with a 5W40 viscosity grade. Here are some details about engine oil selection: Methods for choosing engine oil specifications: Select based on needs while considering factors such as driving environment and owner's driving habits. For vehicles frequently driven in congested areas or with longer service years, higher viscosity oil can be considered as it provides better engine protection. Naturally aspirated engines have lower requirements for oil performance and can use mineral or semi-synthetic oil. Turbocharged engines, being more precise and operating under harsher conditions than naturally aspirated ones, demand higher oil performance and require more fluid lubricants, with full synthetic oil being the optimal choice. Method for checking engine oil level: Locate the dipstick handle in the engine compartment and prepare a tissue; pull out the dipstick, use the tissue to wipe the dipstick head clean; reinsert the cleaned dipstick, then pull it out again. Observe the oil clinging to the end of the dipstick; by examining how the oil adheres to the dipstick, you can determine the highest oil level in the engine.
17
3
Share

What does motorcycle chain engine mean?

Motorcycle chain engine refers to the linking mode between the engine's internal valves and the crankshaft. Advantages of chain engine: The main advantages of chain engines lie in their smooth operation with minimal vibration, smooth acceleration, and high top speed, whereas pushrod engines excel in strong explosive power, simple structure, and easy maintenance. However, their significant drawback is excessive vibration, which reduces user experience and riding comfort. The widespread adoption of chain engines is primarily due to their stable performance and low vibration, making them the preferred choice for vehicles ridden on plains. Chain engine motorcycles: In these motorcycles, the crankshaft drives the camshaft via a timing chain, which then operates the valves to open and close at the right time, with the camshaft positioned overhead. In contrast, pushrod engines use gears and pushrods to drive the camshaft and valve rocker arms, with the camshaft positioned lower. Comparatively, chain engines produce less noise and vibration, offer better acceleration, and are more suitable for high-performance, high-speed, and large-displacement models.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.