How to Use the Air Conditioning in the Baojun 730?

What does the lock on an off-road vehicle mean?

Off-road vehicle lock refers to the differential lock. The following are introductions to three types of differential locks: 1. Central differential lock: It can make the front and rear wheels rotate at the same speed when the wheels slip, but this is limited to minor road conditions. In cases of cross-axle or artillery shell pits, the central differential lock is not very effective. 2. Rear axle differential lock: It can make the rear wheels rotate at the same speed as the front axle. Specifically, when an off-road vehicle is driving on a cross-axle or artillery shell pit and only one wheel has traction while the other is suspended, the vehicle still has sufficient power to move forward. This lock is therefore called the soul of an off-road vehicle. 3. Front axle differential lock: When one side of the vehicle is suspended, the front axle differential lock can ensure that all wheels receive the same power, hence it is referred to as the life-saving component of an off-road vehicle.

15

3

Share

What is the displacement of a 1.5t turbocharged engine?

1.5t turbocharged engine is equivalent to 2.0L displacement. Here's an introduction about automotive displacement: Introduction to automotive displacement: The space volume that the piston moves from top dead center to bottom dead center is called cylinder displacement; If an engine has multiple cylinders, the sum of all cylinders' working volumes is called engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which represents the size of the engine better than bore diameter and number of cylinders. Many indicators of the engine are closely related to displacement. Displacement classification: The classification of Chinese passenger cars is determined by the size of displacement. Mini cars have a displacement ≤1.0L; Compact cars have a displacement between 1.0-1.6L; Mid-size cars have a displacement between 1.6-2.5L; Executive cars have a displacement between 2.5-4.0L; Luxury cars have a displacement >4.0L.

2

Share

What are the precautions for using cars in winter?

Precautions for using cars in winter include replacing winter tires, adding or replacing antifreeze, and selecting suitable engine oil. The specific precautions are as follows: Replacing winter tires: As the temperature drops, the surface of the tires becomes stiff, which can affect the grip performance of the tires. In some cases, this may lead to slipping, especially in northeastern regions where rain and snow are frequent, making road conditions worse. Additionally, due to the effect of thermal expansion and contraction, tire pressure will also decrease. Adding or replacing antifreeze: Antifreeze has two main functions. In summer, when temperatures are higher, antifreeze ensures the normal operation of the car's cooling system, preventing the engine from overheating. In winter, it prevents excessively low temperatures from freezing and damaging engine cylinders and other components. Selecting suitable engine oil: Similarly, due to the drop in temperature, if the cold-start engine oil is too thick in winter, it can affect car starting and increase engine wear. On the other hand, if the hot engine oil is too thin, it can reduce lubrication and sealing performance.

15

1

Share

Which Year's Vehicles Are National IV Standard?

Gasoline vehicles sold between July 1, 2010, and December 31, 2017, are basically National IV standard. The relevant introduction about National IV standard is as follows: Introduction to National IV Emission Standard: Starting from May 1, 2018, the application for National III products was stopped, and only applications for National IV products were accepted. After July 1, 2018, no announcements for National III vehicle models were issued. When applying for the announcement of National IV vehicle models, new specifications and models should be used to distinguish them from National III vehicle models. Since the technical route has been specified in the new standard, National IV vehicle models no longer provide separate recommended technical solutions, and the standard requirements shall prevail. National IV Emission Standard Applicable Vehicle Models: Motorcycles and mopeds are classified according to maximum design speed and displacement. Among them, motorcycles refer to those powered by spark-ignition engines with a maximum design speed greater than 50 km/h or a displacement greater than 50 mL, as well as those powered by compression-ignition (diesel) engines with a maximum design speed greater than 50 km/h or a displacement greater than 50 mL for three-wheeled motorcycles.

1

0

Share

What does 20A mean for a battery?

20A stands for 20Ah, which represents the value obtained under the standard capacity calculation method for lead-acid batteries. The battery should be frequently used and charged: The battery should be frequently used and charged to maintain a saturated state, which extends its service life; do not wait until the battery is depleted before charging, as this will reduce the battery's lifespan by one-third. Also, avoid overcharging, as prolonged use of the charger can lead to aging components and potential leakage. Prevent overcharging of the battery:

10

2

Share

What is the working principle of a gasoline engine spark plug?

Working principle of a gasoline engine spark plug: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder. The spark plug is installed on the side or top of the engine. In early designs, spark plugs were connected to the distributor via ignition cables. However, over the past decade, most passenger car engines have adopted direct connection between ignition coils and spark plugs. If a spark plug is damaged, it can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power output. The most critical problem is difficulty in ignition, affecting the vehicle's normal operation. Severe spark plug erosion—evidenced by pitting, damage, or melted electrodes at the spark plug tip—indicates that the spark plug is defective and should be replaced.

6

3

Share

How to Use the Air Conditioning in the Baojun 730?

What does the lock on an off-road vehicle mean?

What is the displacement of a 1.5t turbocharged engine?

What are the precautions for using cars in winter?

Which Year's Vehicles Are National IV Standard?

What does 20A mean for a battery?

What is the working principle of a gasoline engine spark plug?

What is the Principle of Automatic Transmission?

How Many Rolls-Royce Cars Are There in China?

Will the engine malfunction light come on if the oxygen sensor is broken?

Why does the cylinder extend but not retract?