How to Use the Air Conditioning in the 10th Generation Civic?

What Causes Vehicle Body Shaking When Braking?

Shaking when braking is caused by: uneven wear of the brake discs. The solution is to replace the brake discs or resurface them. Methods for maintaining brake discs include: 1. Develop good driving habits; 2. Avoid emergency braking; 3. Regularly inspect brake pads and discs; 4. Check the thickness of the friction material; 5. Have a professional inspect the brake shoes; 6. Use original equipment manufacturer (OEM) brake pads and discs when replacing. The function of brakes is to reduce speed or bring the vehicle to a stop. The working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and drums, as well as between the tires and the road surface, thereby slowing down or stopping the car.

11

1

Share

How to Use Service Brakes When Parking a Motor Vehicle on a Downhill Slope?

There are three methods for using service brakes when parking a motor vehicle on a downhill slope: 1. Prolonged braking is required on steep slopes: On steeper gradients, longer braking duration is necessary to maintain the vehicle speed within a reasonable range; 2. Decelerate in advance when approaching a downhill slope: Shift gears to utilize engine braking for speed control; 3. For vehicles with manual-automatic transmissions, reduce speed before descending: Switch to M mode and then downshift to a lower gear.

10

4

Share

Should the A/C be turned on when using the car's heater?

Turning on the heater does not require pressing the A/C button. If the A/C button is pressed, the car's air vents will deliver cold air. Below is an introduction to the A/C button: 1. The full name of the A/C button is 'air condition,' translated as the air conditioning button. Its function is to serve as the switch for the car's air conditioning cooling system. Whether it's a manual or automatic air conditioning system, the car's air conditioning system includes an A/C button on the interior control panel. The A/C button is a crucial component of the car's air conditioning system, which is designed to cool, heat, ventilate, and purify the air inside the car. 2. When using the heater in winter, pressing the A/C button does not assist in heating. On the contrary, the operation of the compressor will cause unnecessary power loss. Therefore, when using the heater, the car's compressor can be completely turned off (i.e., there's no need to press the A/C button). Not pressing the A/C button will not have any impact on the heater's performance.

5

4

Share

Is a Manual-Automatic Transmission an AT?

Manual-automatic transmission is not AT. The following are the specific introductions of AT transmission: 1. Structural form: AT transmission is an automatic transmission. Some AT transmissions have manual mode, while some do not. Manual-automatic refers to a certain type of automatic transmission with manual shifting, which refers to a structural form of the transmission. 2. Working principle: AT transmission is a relatively common automatic transmission with many planetary gears inside, relying on planetary gears for speed and torque variation. AT transmission is connected to the engine via a torque converter. This type of transmission has good shift smoothness and high reliability and durability.

16

5

Share

Do You Need a Wheel Alignment When Replacing Brake Discs?

Replacing brake discs does not require a wheel alignment. Situations that necessitate a wheel alignment include: 1. The vehicle's driving performance is affected (the most noticeable symptom for the driver is pulling to one side, and the steering wheel not returning to center after turning is another). 2. Damage to the chassis and suspension due to an accident. 3. Abnormal tire wear (though it's also important to consider whether abnormal wear is caused by incorrect tire pressure—generally, overinflation increases wear on the center of the tread, while underinflation increases wear on both sides; if one side shows uneven wear, it could indicate a camber angle issue). 4. The axle or suspension components have been removed.

4

2

Share

Should Transmission Fluid Be Changed During Maintenance?

When performing maintenance at 40,000 kilometers or every two years, it is recommended to change the transmission fluid. The following two items should be replaced during car maintenance: 1. The essential items to replace are engine oil and the cabin air filter. 2. At 40,000 kilometers or every two years, it is advisable to change the transmission fluid, and clean the throttle body every 20,000 kilometers. Additional information: 1. Car maintenance, also known as vehicle upkeep, refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive measures. It primarily includes maintenance of the engine system, transmission system, air conditioning system, etc., aiming to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, and extend the service life. 2. Not all vehicle models are suitable for owners to change the engine oil themselves, but they can learn to check the oil dipstick to determine if the oil needs replacement. Additionally, the oil filter must be replaced whenever the engine oil is changed.

19

2

Share

How to Use the Air Conditioning in the 10th Generation Civic?

What Causes Vehicle Body Shaking When Braking?

How to Use Service Brakes When Parking a Motor Vehicle on a Downhill Slope?

Should the A/C be turned on when using the car's heater?

Is a Manual-Automatic Transmission an AT?

Do You Need a Wheel Alignment When Replacing Brake Discs?

Should Transmission Fluid Be Changed During Maintenance?

Which Direction to Turn Car Tire Bolts When Changing Them?

Is it possible to use high beams on highways?

Can minors obtain a driver's license?

Where is the car engine oil dipstick located?