How to Use the Air Conditioning in the 10th Generation Accord?
2 Answers
The method to use the air conditioning in the 10th Generation Accord: 1. Start the engine; 2. Press the AC button to activate it. Taking the 2018 Accord 260TURBO as an example, its body dimensions are: length 4893mm, width 1862mm, height 1449mm, wheelbase 1830mm, fuel tank capacity 56L, trunk capacity 530L, and curb weight 1494kg. The 2018 Accord 260TURBO is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 194PS, maximum power of 143kW, maximum torque of 260Nm, and is paired with a CVT continuously variable transmission.
Speaking of the 10th-generation Accord's air conditioning system, I often drive this car to commute, and it feels very intelligent. After starting the engine, the air conditioning control area lights up on the screen—just press the AUTO button, and the system will automatically adjust the temperature and fan speed to quickly reach the set value based on the cabin environment. If you feel too cold or hot, rotate the temperature knob to a comfortable setting, such as around 24°C in summer when the ground is scorching, or higher in winter. You can also manually adjust the fan speed using the +/- buttons, but avoid setting it too high to prevent noise disturbance. I also like using the recirculation mode—closing the windows when air quality is poor improves purification efficiency; switching to fresh air mode on highways can save a bit of fuel. Remember not to blast the fan at maximum speed immediately after startup—let the system adapt for a few seconds to avoid stressing the hardware. Overall, it's quite user-friendly, but if the screen goes black or malfunctions, check the fuse or service the control module.