···
Log in / Register

How to use the air conditioning in Roewe 750?

5 Answers
LaNoah
07/28/25 5:51pm

The usage method of the Roewe 750 air conditioning is as follows: 1. After starting the vehicle engine, click the OFF button on the central control panel to turn on the air conditioning. 2. After turning on the air conditioning, click the AC button on the air conditioning to enter the cooling mode, then adjust the appropriate temperature and air volume to start cooling. 3. If you want to turn on the heating mode, there is no need to press the AC button; simply increase the temperature and adjust the air volume to start heating. Additionally, when using the air conditioning in summer, be careful not to immediately activate the internal circulation after entering the car. Because the temperature inside the car is higher than the outside temperature, this would actually reduce the cooling effect. When you first enter the car, you should open the windows for ventilation and turn on the external circulation to expel the hot air. After the temperature inside the car has dropped, you can then switch to internal circulation.

Was this review help?
1
3
Share
DamianDella
08/11/25 9:53pm

I've been driving an old Roewe 750 for three years, and its air conditioning system is quite straightforward. The row of buttons in the middle of the dashboard is the AC control panel. The most frequently used is the large knob on the left—it adjusts the temperature: turn it to the right (red zone) for heating and to the left (blue zone) for cooling. The knob on the right controls the fan speed with five settings in total. In summer, remember to press the AC button first to activate the compressor; otherwise, you'll just get airflow without cooling. In winter, simply turn up the temperature for warm air without needing the AC. Here's a handy tip: When the windshield fogs up, press the button with the fan-shaped icon—it automatically maximizes airflow for quick defogging, much faster than manual adjustment. Don't randomly press the small round button under the glove compartment—it's the switch for the rear independent AC. Pressing it by mistake will turn off the rear vents.

Was this review help?
7
0
Share
Expand All
Adelyn
09/30/25 2:46am

Last week, I just taught my wife how to drive our family's Roewe 750, with a special focus on the air conditioning system. The easiest way is to press the AUTO button right after starting the car—the AC will automatically adjust the fan speed and temperature based on your settings. However, in auto mode, the fan noise might suddenly increase; don’t panic, as this is just the system quickly regulating the temperature. Manual mode offers more flexibility—the button with a wavy arrow switches between internal and external air circulation. Always use internal circulation in traffic jams to avoid inhaling exhaust fumes. If there’s an unpleasant smell from the AC, turn off the AC button and run just the fan for five minutes before shutting it off to reduce mold buildup. The rearview mirror heating button is located just below the AC controls—remember to turn it on during rain or snow, and don’t confuse it with the AC buttons.

Was this review help?
4
0
Share
Expand All
Josiah
11/13/25 4:37am

A veteran with ten years of auto repair experience said that to make the Roewe 750's air conditioning last longer, attention to detail is crucial. Don't turn on the AC immediately after ignition; wait for the tachometer to stabilize before starting the compressor to reduce engine load. When using the heater, avoid adjusting the temperature knob until the water temperature rises, or you'll get cold air and risk catching a cold. The small display on the far right shows the set temperature, but the actual vent temperature is about three degrees lower, which is a normal design. The rear window defroster button automatically turns off after fifteen minutes to prevent battery drain. If the air conditioning smells bad, it's likely due to a dirty filter, which can be replaced for just fifty yuan at a repair shop.

Was this review help?
2
2
Share
Expand All
MaverickLee
01/03/26 6:18am

Long-distance driving tips: Don't keep the Roewe 750's AC at maximum fan speed throughout the journey. In the city, level 3 fan speed provides sufficient cooling, while level 2 on highways is more fuel-efficient due to lower power consumption by the blower. If there are independent rear air vents, don't completely close the rotary wheel behind the armrest box, or the front seats will freeze while the rear remains stuffy. After exposure to intense sunlight, open the windows for a minute before turning on the AC for faster cooling. A hidden feature—holding the recirculation button for three seconds automatically closes all windows, which is especially useful on rainy days. It's recommended to replace the AC filter every two years; purchasing a 30-yuan Mann filter online is half the price of getting it at a 4S shop.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the reason for the car displaying 'Check Engine System'?

When a car displays 'Check Engine System', it is typically due to engine stalling faults or idle speed malfunctions. Below are detailed explanations of the specific causes: Engine Stalling Fault: During engine operation, if the speed fluctuates erratically, this phenomenon is known as engine stalling. The causes of such erratic speed fluctuations can include faults in the fuel injection system, ignition control system, or even the intake system. Idle Speed Malfunction: When the engine operates normally at medium to high speeds but exhibits unstable idle speed or even stalls at idle or near-idle speeds, this is usually caused by issues in the intake system or fuel injection control system. Occasionally, mechanical faults in the engine can also lead to poor idle performance.
9
4
Share

Which Volkswagen model is the coupe?

Volkswagen's coupe model is the Lamando. Below is an introduction to the exterior and configuration of the Volkswagen Lamando coupe: Exterior: The front features a diving horizontal design with two chrome strips on the upper grille, seamlessly connected to the chrome headlight brows. The front bumper, paired with the lower grille, extends horizontally to both sides, creating a natural and impactful look. Configuration: Equipped with the all-new EA888 TSI engine, a perfect TSI engine that innovatively integrates turbocharging technology, direct fuel injection, and variable valve timing. It maximizes energy efficiency, delivers high-performance power output, and ensures ultra-low fuel consumption.
13
3
Share

How many kilograms of car fire extinguisher are needed?

Car fire extinguishers generally require about three kilograms, which is approximately six pounds. The following are precautions for using car fire extinguishers: For initial fires: Fire extinguishers can only be used to put out initial fires. When you notice smoke or unusual odors from your car, you should use the fire extinguisher promptly. Aim at the base of the flame: When using the fire extinguisher, do not spray it at the surface of the flame. Instead, aim it at the base of the flame and ensure the fire is completely extinguished before moving the extinguisher away. Locate the source of the fire: Open the engine hood promptly and identify the exact location of the fire as quickly as possible.
15
5
Share

What is ect2nd Toyota for?

ect2nd Toyota refers to the second-gear start mode, which is available on many Toyota SUVs. First gear provides higher torque, making it prone to wheel spin on slippery surfaces during acceleration. To prevent this, Toyota introduced the second-gear start mode, reducing the likelihood of wheel slip. Below is an introduction to the S mode: 1. Overview: It keeps the engine at higher RPMs for extended periods, allowing the vehicle to maintain low-gear, high-RPM operation for better torque output and acceleration. 2. Precautions: Since S mode only delays gear shifts without altering other operational parameters, it increases transmission load and temperature in the short term, leading to accelerated wear. Therefore, avoid prolonged use of S mode.
10
1
Share

Reasons Why a Gasoline Engine Won't Start

Gasoline engine failure to start is caused by carburetor blockage, impure gasoline, or severe carbon buildup. Below are detailed explanations of these causes: Carburetor Blockage: Clean using compressed air and CarPro cleaner. Impure Gasoline: If the gasoline is impure or contains water or other impurities in the fuel tank, the engine may start at idle but speed becomes unstable when accelerating, and stalls with larger throttle openings. Clean the fuel tank and replace with genuine 93-octane gasoline. Check if the kill switch is in the ON position and verify the fuel tank switch is open. Severe Carbon Buildup: Severe carbon deposits on pistons and cylinders lead to poor compression. A complete disassembly and thorough cleaning is required.
7
0
Share

What is the standard for left and right adjustment of car headlights?

The standard for left and right adjustment of car headlights is that the low beam cutoff line must be aligned horizontally. The following is an introduction to the methods and precautions for adjusting headlights: Adjustment method: The headlight height adjustment switch uses a roller for adjustment, with numbered gears marked on the roller. The numbers indicate the height of the headlights—the higher the number, the higher the headlight position. Precautions: The height of the car headlight beam is crucial, and correct adjustment is very important. The directional height of the beam not only affects the actual illumination effect but also has a significant impact on the driving safety of both your own and other vehicles. If the car headlight beam is too high, it will not illuminate the ground clearly; if it is too low, the illumination distance will be short.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.