···
Log in / Register

How to use the air conditioning in a Baojun 310 manual transmission?

4 Answers
VonClaire
07/29/25 6:20pm

First, you need to depress the brake pedal and start the engine. Then turn the key to the ST position to start the engine until the idle speed stabilizes. Turn the fan speed knob to the far right for maximum airflow. Rotate the temperature mode knob to the left to activate the cooling mode. Press the A/C switch to turn on the compressor. Press the recirculation button to activate the interior air recirculation mode.

Was this review help?
18
4
Share
AryaAnn
08/14/25 11:01am

After driving for over ten years, I've found that manual air conditioning is actually easier to use. The Baojun 310's AC has just three knobs! The left knob adjusts the temperature—blue for cold and red for warm—I usually set it slightly towards the cold side. The middle knob controls the fan speed with four adjustable levels. The right knob manages the vent mode; for direct airflow, just turn it to the first icon. In summer, remember to press the small snowflake button for AC, while in winter, simply turn to the red zone without touching AC. If the windshield fogs up, switch to the defrost mode and max out the fan speed for instant results. On highways, use external circulation for better airflow; in city traffic, switch to internal circulation for fresher air. Lastly, a tip: before turning off the AC in winter, shut off the AC first and let natural air blow for five minutes to prevent mold in the pipes.

Was this review help?
7
3
Share
Expand All
VanLogan
10/14/25 5:32am

When I first got my Baojun 310, figuring out the AC system was quite fun. Look at the row of buttons on the dashboard: the largest knob on the left controls temperature—turn it to the blue line for cold air in summer, and straight to the red zone for warmth in winter. The middle knob adjusts fan speed—I recommend not always cranking it to max. The right knob changes airflow direction; the far-right icon works best for defrosting the windshield. To cool, first press the 'AC' button in the top-left corner, and avoid the natural air button. My habit is to open windows briefly after starting the car, then close them and turn on AC—cooling becomes twice as fast. Using air recirculation saves fuel, but remember to switch to fresh air mode periodically. For defogging, select defrost mode with warm air—it’s much more comfortable than using cold air.

Was this review help?
15
0
Share
Expand All
VonEliza
11/27/25 6:26am

As a female owner of the Baojun 310, using the air conditioning requires balancing comfort and convenience. The temperature adjustment knob is on the left, producing a clear clicking sound when rotated. The fan speed knob is centrally located, and noise is minimal when set to the second level. My favorite is the front footwell heating mode—within half an hour in winter, the cabin becomes comfortably warm. When using the cooling function, be sure to activate the small blue light next to the AC button; otherwise, it’s just natural air. On rainy days when fogging occurs, I switch to the front defrost mode + external circulation, which is much safer than wiping with a towel. I clean the air conditioning filter every month, and during maintenance, I remind the technician to check the refrigerant pressure. A tip: turn off the AC five minutes before shutting down the engine but keep the fan running to dry the ducts, preventing odors.

Was this review help?
4
4
Share
Expand All
More Forum Discussions

How many kilometers are considered as a nearly new car?

50 kilometers or less is considered a nearly new car. Currently, there are no mandatory national requirements for the mileage of new cars. However, under normal circumstances, if the vehicle is domestically produced, its mileage is mostly within 50 kilometers. For imported vehicles, considering factors such as transportation, port handling, and customs, the mileage is mostly within 100 kilometers, but this is not a standard. Mileage is not the sole criterion for determining a car's condition. When purchasing a car, you should also pay attention to the following issues: 1. Check the vehicle identification number and the production date and manufacturer on the vehicle's nameplate; 2. Open the engine hood and inspect whether the components inside the engine compartment are clean, tidy, and show any signs of manual modification; 3. Check the vehicle's undercarriage components for oil leaks, fluid levels, and any signs of impact.
18
1
Share

How to Clear the Maintenance Reminder for Mazda 3?

To reset the maintenance reminder for Mazda 3, follow these steps: 1. Press the one-touch start button. 2. Press the INFO button on the left side of the multifunction steering wheel. 3. Press the SET button on the right side of the steering wheel. 4. The central LCD screen will display the vehicle maintenance information. 5. Press the OFF button at the lower right of the steering wheel, and the wrench symbol will disappear, indicating the maintenance has been reset. Additional Information: The Mazda 3 is a vehicle series under Changan Mazda, which has made significant improvements to core technologies such as the chassis, body, and powertrain, greatly enhancing the product's performance and luxury level, resulting in a substantial upgrade in product grade.
4
5
Share

What is the actual fuel consumption of the Roewe RX5?

The Roewe RX5 is an internet-connected SUV launched by SAIC Roewe in 2016. The vehicle adopts the 'Blue Core' high-efficiency power technology, equipped with two turbocharged engines: a 2.0T and a 1.5T in-cylinder direct injection turbocharged engine. Relevant information about the Roewe RX5 is as follows: 1. The Roewe RX5's 2.0T engine has a maximum power of 220 horsepower, a peak torque of 350 Nm, and a minimum combined fuel consumption of 8.1L per 100 km; the 1.5T engine has a maximum power of 169 horsepower, a peak torque of 250 Nm, and a combined fuel consumption of only 6.8L per 100 km. 2. The Roewe RX5 features Porsche-tuned chassis, GKN intelligent all-wheel drive system sourced from Land Rover, full independent suspension system, and four-way high-speed CANBUS system bus, comprehensively enhancing the driving and riding quality.
17
3
Share

Where is the trunk button on the 320li?

The trunk switch of the BMW 320li is located below the driver's door. The trunk capacity of the BMW 320li is 520L. The steps to open the trunk of the BMW 320li are as follows: 1. Gently pull up the switch button, and the trunk will open. 2. Alternatively, the trunk can also be unlocked using the key. Press the button on the wireless remote key for at least one second, and the trunk lid will automatically unlock and pop open slightly. 3. If the key is within the sensing range, you can directly pull the trunk handle to lift the trunk lid. 4. Some models have two additional buttons on the trunk: the left button is for closing the trunk, and the right button is for closing the trunk and locking the car.
4
3
Share

How to enable auto-locking for Honda Fit?

Fit does not have an auto-locking function, only manual locking. If you want to use this feature, you can install a device plugged into the OBD interface. The purpose of the auto-locking function is anti-theft, allowing the doors to lock quickly after driving to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. It also protects child passengers inside the car, preventing young children from opening the door handles while the car is in motion. Below is more information about the Honda Fit: 1. The Fit is a hatchback launched by GAC Honda. The body dimensions are 4065mm in length, 1695mm in width, and 1525mm in height. 2. On June 3, 2021, Honda officially released two special edition models (Casa and Maison) to commemorate the 20th anniversary of the Fit. The new models also feature different interior color schemes to highlight differences. In terms of specific configurations, the two new models come with brown seat belts, branded seats/floor mats, and newly added front seat heating and a center armrest box.
15
0
Share

How Many Liters of Engine Oil Should Be Added to the Geely Boyue?

For the Geely Boyue 2.0L, approximately 4 liters of engine oil should be added; for the 1.8T, around 5 liters. Boyue X Configuration: The Boyue X features a brand-new front fascia design, with a large grille and lower bumper combining to form an 'X' shape. It comes with black-painted alloy wheels and orange brake calipers, complemented by orange trim on the side skirts. The door panels and center console are extensively wrapped in leather. The interior offers two color schemes: Blue Wing Cockpit and Scarlet Cockpit. The former primarily features blue and white tones, while the latter uses red and black. It is equipped with a 12-speaker BOSE sound system, including speakers on the top of the dashboard, and ambient lighting that automatically changes in sync with the music. The Boyue X shares the same powertrain as the Boyue PRO, featuring a 1.8T engine paired with a 7DCT transmission. The engine delivers a maximum power of 184 horsepower and a peak torque of 300 Nm. Effects of Mixing Different Engine Oils: Since different brands and types of engine oils contain varying chemical additives, mixing them may lead to chemical reactions that reduce lubrication effectiveness. Additionally, it could produce acidic or alkaline compounds, accelerating corrosion of engine components.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.