How to use the air conditioning cold air in Geely Vision X3?
3 Answers
Here is how to use the air conditioning cold air in Geely Vision X3: 1. Enter the driver's cabin to see the vehicle's air conditioning control area. 2. The left knob adjusts the air volume of the air conditioning. 3. The right knob adjusts the temperature of the air conditioning. 4. "A/C" is the air conditioning cooling switch, and "OFF" turns off the air conditioning. 5. "MODE" adjusts the direction of the air conditioning vents. 6. The car's internal circulation is controlled by the button shown in the image below. 7. If the front windshield fogs up, you can use the defogging function, and in rainy weather, turn on the rear windshield and mirror heating. Additional information: There are other buttons in the air conditioning control area, including: front defrost button, power-off button, air conditioning vent mode button MODE, internal and external circulation buttons, etc.
I've been driving my Geely Vision X3 for quite some time, and using the air conditioning for cold air in summer is simple yet crucial. After starting the vehicle, first press the A/C button on the center console to light it up, which activates the cooling system. Then, turn the temperature knob to a low setting, around 18°C, and you'll feel the cool air coming out. For the fan speed, use the knob to select a medium setting—avoid setting it too high as it can be noisy. When you first turn on the AC, use the external circulation mode for a few minutes to expel the hot air inside the car before switching to internal circulation to maintain a steady supply of cool air, which is both fuel-efficient and effective. During daily use, adjust the air vent direction—point it upward or sideways rather than directly at your head or joints to avoid discomfort. The Vision X3's AC performs well, cooling quickly. If the air doesn’t feel cold enough, it might be due to a dirty filter or low refrigerant levels, so it's recommended to check the filter and system pressure every six months or so. For long trips, turn on the AC a few minutes early to pre-cool the system, and before parking, turn off the A/C but leave the fan running to dry the pipes and prevent odors. Following these steps in the summer heat keeps the cabin comfortable, and with practice, the routine becomes second nature.
I'm very cautious about using the air conditioning's cold air, as it's a matter of driving safety. Here's how to operate it on the Geely Vision X3: After starting the engine, immediately press the A/C button to activate the air conditioning, then turn the temperature knob to the low-temperature zone, such as the blue mark. Don't crank the fan speed to the highest setting right away; increase it gradually to avoid large temperature differences that could cause window fogging and obstruct your view. First, use the external circulation for a few dozen seconds to ventilate and dissipate heat before switching to internal circulation to maintain stability. While the air conditioning is on, ensure the airflow isn't blowing directly at the driver to prevent distraction and fatigue. Remember to check the air filter monthly—replace it if it's dirty to avoid inhaling dust, which can affect health. For short city trips, using the fan instead can save energy; reserve the cold air for long highway drives to save fuel. On rainy days or during temperature fluctuations, fine-tune the air conditioning temperature for better defogging effects. The Geely Vision X3's air conditioning interface is clear and straightforward, making it easy for beginners to use. If any issues arise, visit a professional shop early to avoid prolonged problems.
