How to Use Spray Paint?
3 Answers
Before use, clean the stains and dust on the area to be sprayed to avoid affecting the appearance after spraying. Shake the spray paint bottle several times before spraying to ensure the paint inside is well mixed. Maintain a distance of 15-30CM from the object to be sprayed, and press the spray head with your hand to start painting. Spray evenly back and forth during application. Wait for the paint to dry completely after spraying to finish the repair.
I enjoy doing DIY car repairs, especially using spray paint for minor touch-ups. First, make sure everything is clean by washing off all the dirt from the car body. Then, lightly sand the scratched area with sandpaper to make it smooth and even. Next, cover the surrounding areas you don't want to paint with tape or plastic film—don't skip this step, or the paint might splatter onto other parts. Before spraying, shake the can for a few minutes to mix the paint well. When spraying, hold the can 15-20 cm away from the surface and move it evenly like painting, avoiding staying in one spot too long to prevent thick coats and drips. Apply a thin layer and let it dry for 15 minutes, then repeat for two to three more layers to ensure even color coverage without showing the base. After finishing, let it dry for a full day without exposing it to water. Finally, you can optionally apply polishing wax for protection. Remember to work in a well-ventilated area and wear a mask and gloves for safety. Fixing small scratches yourself doesn’t cost much and saves a lot on repair bills—it’s quite cost-effective.
When I first bought my car, I tried spray painting it myself. The process was a bit messy, but I learned a lot. First, I cleaned the area to be painted with a cleaner and sanded down the old paint to ensure the new paint would adhere properly. I made a mistake when applying the tape, leaving an edge after peeling it off, which was annoying. Later, I learned to plan the masking area carefully. When spraying, hold the can steady, press the nozzle gently, and move back and forth without staying in one spot. Apply thin layers—too thick and it can bubble or drip. My first attempt dried too quickly because I rushed, resulting in uneven color. After it dried completely, I lightly sanded it with sandpaper and then applied a protective coat for a smoother finish. I did the whole job in the yard with good ventilation to avoid inhaling fumes. It takes some patience, but doing it myself saved me a lot of money compared to going to a shop.
