How to Use Sport Mode Properly?

2 Answers
TaylorLee
07/25/25 1:19pm
How to use Sport Mode: Sport mode is designed for aggressive driving or overtaking situations. It delays upshifts until the engine reaches 3,000 RPM or higher, maintaining the engine at lower gears with higher RPM for extended periods. This allows the vehicle to deliver maximum torque output in short bursts, resulting in stronger instantaneous acceleration and greater acceleration force. However, it's not recommended to use Sport mode for prolonged high-speed driving. Since Sport mode only delays upshifts without altering other operational parameters, it inevitably increases transmission load and temperature in the short term, leading to accelerated wear. Additionally, ride comfort may be slightly compromised in Sport mode.
Was this review help?
19
3
Share
JasperMarie
08/11/25 8:41pm
When driving in sport mode, I usually choose it for situations requiring acceleration, such as overtaking or going uphill. My car is automatic, and by gently shifting to S mode, the engine RPM noticeably increases, with more direct throttle response, making you feel the power is always ready. However, I don’t keep it on all the time because fuel consumption is significantly higher than in normal mode, and prolonged use may increase wear. On highways or mountain roads, switching to sport mode makes acceleration much quicker, making overtaking safer. Remember to adjust based on driving habits—for example, use it less in urban areas to save fuel. Additionally, operation details may vary between different car models, so checking the manual is a good idea. For first-time attempts, choose a road with fewer cars to practice and avoid accidents.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Teana 2.3V6?

The Teana 2.3V6 has a total of 6 models. The Teana 2021 2.0T XV-AD1 Zhizun Navigation Edition is equipped with a 2.0T-243 horsepower KR20 engine, with an NEDC fuel consumption of 6.7L per 100km. The Teana 2021 2.0T XL-Upper-AD1 Zhixiang Navigation Edition and Zhijin Edition are equipped with a 2.0T-243 horsepower KR20 engine, with an NEDC fuel consumption of 6.6L per 100km. The Teana 2021 2.0L XE Fashion Edition, 2021 2.0L XL-Upper-AD1 Zhixing Navigation Edition, and Comfort Edition are equipped with a 2.0L-156 horsepower MR20 engine, with an NEDC fuel consumption of 5.9L per 100km. The fuel tanks of all 6 Teana models are the same. The distance that can be covered with a full tank of fuel is as follows: Models equipped with the 2.0L-156 horsepower L4 engine have a fuel tank capacity of 61.3L. The distance that can be covered with a full tank is 61.3/5.9*100=1039km. Models equipped with the 2.0T-243 horsepower L4 engine have a fuel tank capacity of 61.3L. The distance that can be covered with a full tank is 61.3/6.6*100=928km, or 61.3/6.7*100=914km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements, as larger displacements usually mean higher power output, requiring more gasoline for combustion. Cars with greater weight also consume more fuel, as greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
14
4
Share

How to Check Vehicle Information for a New Car?

The vehicle identification number (VIN) will be clearly marked on the vehicle registration certificate, insurance policy, and recorded in the vehicle maintenance manual. These documents not only contain the VIN but also key information such as manufacturing date, engine model, and vehicle origin. The location of this information may vary depending on the brand and model. During vehicle manufacturing, the VIN is stamped onto the car body to facilitate identification of the vehicle structure for license plate registration or ownership transfer after sale.
16
3
Share

How to Get an Annual Inspection for a New Car?

Need the car owner to bring the vehicle license and compulsory traffic insurance policy to the annual inspection window at the vehicle management office to apply for the annual inspection sticker. Upload photos of relevant materials, including the compulsory traffic insurance policy, by yourself. After passing the review, the annual inspection sticker will be delivered to the car owner by express.
12
3
Share

How is the depreciation fee for a new car calculated?

It is generally calculated based on a 5% residual value rate. It is recommended to use the straight-line method, which is simple and easy to implement, and complies with the relevant provisions of the tax law implementation regulations. Using the straight-line method, the monthly depreciation amount of this fixed asset is (200000-10000)/48=3958.33.
18
1
Share

How to Register a New Car by Yourself?

Prepare the original and photocopy of your ID card in advance. For non-local residents, the original and photocopy of a temporary residence permit are required. Register and apply for a license plate at the vehicle management office. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code and the vehicle's appearance. After the vehicle inspection, go to the vehicle management office hall to select a license plate number. Generally, there are two options: self-selection or random selection, and you can choose either. After selecting the number, pay the fees and wait to receive the license plate. It usually takes three to five working days to get the license plate.
20
1
Share

What are the steps for charging a new energy vehicle?

When time permits, it is advisable to opt for slow charging mode; if time is urgent, fast charging mode can also be selected. Always ensure the vehicle is turned off before charging. First, insert the charging gun into the vehicle's charging port, then activate the charging station. After charging is complete, please turn off the charging station before removing the charging gun.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.