How to Use Reference Points for Parallel Parking and Exiting?

Can a new car be registered without paying the purchase tax?

A new car cannot be registered without paying the purchase tax. The purchase tax must be paid first before registration, as the vehicle management office will only issue a license plate after the tax is paid. Additionally, compulsory insurance must be purchased before registration, while commercial insurance can be bought later. Additional information: 1. The purchase tax is a tax levied by tax authorities on the acquisition of specified properties and assets within the scope of the tax system, such as the vehicle purchase tax. The vehicle purchase tax is a tax imposed on entities and individuals who purchase designated vehicles within China, evolving from the vehicle purchase surcharge. 2. The current basic regulations of the vehicle purchase tax law are implemented from January 1, 2001, under the "Interim Regulations of the People's Republic of China on Vehicle Purchase Tax." The taxpayers of the vehicle purchase tax are entities and individuals who acquire (including purchasing, importing, self-producing, receiving as gifts, winning as prizes, or obtaining through other means and using personally) taxable vehicles. The taxable scope includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles, with a tax rate of 10%. The formula for calculating the taxable amount is: Taxable Amount = Taxable Price × Tax Rate.

3

1

Share

What Does Engine Displacement Mean in Cars?

The displacement of a car refers to the total capacity of all the cylinders in the engine. For example, if a car engine has 4 cylinders, each with a capacity of 0.5L, then the engine's displacement would be 0.5Lx4=2.0L. Alternatively, if a car engine has 6 cylinders, each with a capacity of 0.6L, then the engine's displacement would be 0.6Lx6=3.6L. Below is relevant information: Displacement: Displacement refers to the exhaust volume, and the cylinder working volume is the volume swept by the piston from the top dead center to the bottom dead center, also known as single-cylinder displacement. It depends on the cylinder bore and piston stroke. The engine displacement is the sum of the working volumes of all cylinders, usually expressed in liters (L). Structural Parameters: Engine displacement is one of the most important structural parameters. It represents the size of the engine more accurately than the cylinder bore and the number of cylinders. Many performance indicators of the engine are closely related to the displacement.

15

0

Share

Can a Car's Air Conditioning Filter Be Cleaned and Reused?

Car air conditioning filters cannot be reused after washing. Due to the material and structural characteristics of the air conditioning filter, it must not be washed with water, as doing so will render it unusable. To clean the filter, you can use a high-pressure air gun to blow away dust and debris. It is recommended to clean it once a month, especially during the summer when the air conditioning is frequently used. Below is relevant information: Cycle Life: This type of filter cannot be cleaned indefinitely for reuse. Typically, after cleaning 2-3 times, it is advisable to replace the filter with a new one. Just like clothes can be shaken to remove some dirt, they still won't be as clean as new ones. The performance of a new filter differs from that of an old one. Research shows that using a filter that does not meet filtration standards can cause significant damage to the engine, directly reducing its lifespan. Oil Filter and Fuel Filter: Oil filters and fuel filters differ from air filters. Both oil filters and fuel filters are soaked in filter cups, making them wet when installed. Over time, they accumulate many particles.

1

3

Share

Under what circumstances is it easy to blow a head gasket?

Conditions that can easily cause a head gasket to blow include uneven mating surfaces or bolts not being tightened evenly. Additionally, excessive engine heat leading to deformation can also cause a head gasket to blow. Below is relevant information about cylinder head gaskets: 1. Introduction to cylinder head gaskets: A cylinder head gasket, also known as a cylinder liner gasket, is located between the cylinder head and the cylinder block. Its function is to fill the microscopic gaps between the cylinder block and the cylinder head, ensuring a good seal at the mating surfaces, thereby maintaining the sealing of the combustion chamber and preventing gas leakage from the cylinder and coolant leakage from the water jacket. Depending on the material, cylinder head gaskets can be classified into various types, such as metal-asbestos gaskets, metal-composite gaskets, and all-metal gaskets. 2. Working conditions and requirements: The cylinder head gasket should have sufficient strength and be resistant to pressure, heat, and corrosion. Additionally, it needs to have a certain degree of elasticity to compensate for the roughness and unevenness of the cylinder block's top surface and the cylinder head's bottom surface, as well as the deformation of the cylinder head caused by gas pressure during engine operation.

17

0

Share

What are the requirements for the slope in Subject 2 of the driving test?

Slope parking is one of the more challenging tasks in Subject 2. Below are the detailed requirements: 1. Slope requirements: The slope for Subject 2 must be ≥10% gradient and ≥30 meters in length. The test assesses the driver's ability to park and start on a slope at a designated spot, evaluating the coordination of steering, braking, and clutch operation. The objective is to train drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to adapt to parking and starting on uphill sections. 2. Deduction criteria: Failing to park at the designated spot results in a 100-point deduction; if the front bumper does not reach the control line after stopping, 100 points are deducted; rolling back more than 30 cm after stopping leads to a 100-point deduction; rolling back less than 30 cm results in a 10-point deduction; not activating the left turn signal when starting incurs a 10-point deduction; driving over the solid edge line of the road results in a 100-point deduction; stopping without reaching the parking line leads to a 10-point deduction; taking more than 30 seconds to start results in a 100-point deduction.

2

1

Share

What else needs to be replaced when changing the timing belt?

When replacing the timing belt in a car, it is also necessary to replace the corresponding tensioner pulley at the same time. The function of the tensioner pulley is to adjust the tightness of the timing belt. It is generally replaced together with the timing belt to avoid future troubles. Other parts do not need to be replaced unless necessary. Just perform regular maintenance. Additional information: 1. During actual use, the tensioner pulley requires a certain torque to maintain appropriate belt tension, prevent belt slippage, and compensate for the elongation caused by belt wear and aging. When the tensioner pulley is in operation, the moving belt may excite vibrations in the tensioner, which can lead to premature wear of the belt and tensioner. 2. Nowadays, as cars become more advanced, the workload for repairs will gradually decrease. As a result, car owners often think that their vehicles basically do not need repairs. However, various car manufacturers clearly specify the cycle for routine inspection and replacement of the timing belt. As part of regular maintenance and comprehensive inspection, the maintenance of the timing belt should be included in the regular maintenance program.

3

0

Share

How to Use Reference Points for Parallel Parking and Exiting?

Can a new car be registered without paying the purchase tax?

What Does Engine Displacement Mean in Cars?

Can a Car's Air Conditioning Filter Be Cleaned and Reused?

Under what circumstances is it easy to blow a head gasket?

What are the requirements for the slope in Subject 2 of the driving test?

What else needs to be replaced when changing the timing belt?

Who to Pay the Subject 2 Simulation Fee to?

How Many Times Can Subject 2 Exam Be Cancelled?

What are the penalty points for the ramp in Subject 2?

How to Turn Off the S90 Auto Start-Stop?