How to Use Nissan Intelligent Mobility?

What to Do If the Vehicle Fails to Start the Day After Wading Through Water?

If the vehicle fails to start the day after wading through water, it is recommended to take it to a professional repair shop for inspection. Methods to prevent water from entering the engine: 1. When wading through shallow water: Engage 1st or 2nd gear and drive steadily at low speed into the water, avoiding heavy acceleration or sudden movements to prevent water splashing into the engine and causing it to stall. 2. While driving in water: Pass through the water in one go, avoiding gear changes or sharp turns midway. 3. If encountering another vehicle wading ahead: Do not follow closely to prevent stopping due to the leading vehicle's malfunction. 4. If the water level exceeds half the tire height: It is advisable not to attempt wading, as the car's exhaust pipe is at this height, and forcing through could cause water to enter the exhaust pipe, severely damaging the engine.

3

0

Share

How to Start a Nissan Tiida Automatic Transmission?

Here is how to start a Nissan Tiida automatic transmission: 1. Ensure the gear is in P (Park), press the brake pedal, and shift the gear to D (Drive). 2. Release the brake pedal, and the car will start moving slowly. If you want to accelerate quickly, simply press the accelerator pedal. Here are some related details: 1. Exterior: The 2020 Tiida adopts the new V-motion design language, the most notable feature of which is the enlarged signature silver V-shaped grille, exaggerating Nissan's current design style to achieve a more youthful and fashionable look. 2. The 2020 Tiida comes standard with a TPMS intelligent tire pressure monitoring system and adds a smart rearview mirror dashcam. Additionally, the multifunction steering wheel of the Zhixing and Zhixiang trims is upgraded to genuine leather. At the same time, the 2020 Tiida continues its advantage in comfort, with the multifunction steering wheel of the Zhixing and Zhixiang trims upgraded to genuine leather, further enhancing the interior quality for a more comfortable driving experience.

14

2

Share

Should You Use Internal or External Air Circulation When the Vehicle is Exposed to Sunlight

It is recommended to use external air circulation after the vehicle has been exposed to sunlight. The main differences between internal and external air circulation in vehicles are as follows: 1. Function: Internal circulation can effectively block external dust and harmful gases from entering the vehicle and also helps maintain temperature; external circulation allows fresh air from outside to enter the vehicle. 2. Usage: During peak hours in traffic jams, tunnels, or dusty road sections, it is advisable to use internal circulation; during long highway drives when the air inside the vehicle feels stale, external circulation should be used. 3. State: Internal circulation closes the airflow channel between the inside and outside of the vehicle, meaning there is no airflow without the fan on, and when the fan is on, the airflow comes only from inside the vehicle, creating internal circulation; external circulation uses the fan to draw air from outside into the vehicle, with the fan's airflow coming from outside, and even without the fan on, airflow is still drawn into the vehicle while driving.

20

5

Share

What is the cause of the rear window rattle in the BYD Han?

The cause of the rear window rattle in the BYD Han is damage to the rubber seal of the rear window. Below is an introduction to the BYD Han: 1. Exterior: Dimensions are 4980×1910×1495mm with a wheelbase of 2920mm. The front face features a closed design approach, simple and elegant. Design elements transform the dragon mouth into a flat design, paired with horizontal lines for enhanced aesthetics. 2. Powertrain: The BYD Han is equipped with the company's self-developed lithium iron phosphate blade battery, offering two range versions: the ultra-long range version and the four-wheel-drive high-performance version. The ultra-long range version features a permanent magnet synchronous single motor that delivers a maximum power of 163kW, a maximum torque of 330N·m, and a maximum range of 605km.

10

4

Share

How to Replace the Rubber Blade on a Beam Wiper?

Method for replacing the rubber blade on a beam wiper: First locate the rubber blade at the sliding section, then remove one end of the fixing clip. The rubber blade is secured to the wiper via a metal buckle. Pry open the metal buckle to remove the old rubber blade, then install the new wiper rubber blade and re-fasten the metal buckle. Below are some details about beam wipers: 1. Beam wipers typically need replacement every two to three years. 2. Beam wipers fit tightly against curved windshields with even pressure distribution, resulting in quiet and smooth wiping. 3. The floating steel structure of beam wipers reduces vibration wear and extends service life. 4. Beam wipers consist of four components: the rubber blade, steel beam, protective cover, and plastic parts. The built-in steel beam evenly distributes pressure across the rubber blade, improving wiping performance while minimizing water streaks, scratches, and noise, thereby enhancing safety during use.

11

2

Share

Does Sitting in the Car with the AC On Damage the Vehicle?

Sitting in the car with the AC on can damage the vehicle. It causes certain wear and tear on the engine, potentially requiring shorter maintenance intervals. If the engine's RPM is too low, it may struggle to power the AC, and even if it does, it can lead to unstable engine operation, incomplete combustion, and increased carbon deposits. Additionally, idling with the AC on can result in poor system cooling, easily causing the engine temperature to rise too high, which may damage the engine. Below are some tips for AC maintenance: 1. Comprehensive AC inspection: When using the AC for the first time in summer, inspect the AC system thoroughly, such as checking the refrigerant level via the reservoir, whether the AC filter is too dirty, and if there are any foreign objects in the radiator. 2. Pay attention to AC cleaning: The AC filter should be replaced regularly to prevent moldy odors. The condenser should also be cleaned periodically, and for a thorough cleaning, the radiator should be removed.

17

2

Share

How to Use Nissan Intelligent Mobility?

What to Do If the Vehicle Fails to Start the Day After Wading Through Water?

How to Start a Nissan Tiida Automatic Transmission?

Should You Use Internal or External Air Circulation When the Vehicle is Exposed to Sunlight

What is the cause of the rear window rattle in the BYD Han?

How to Replace the Rubber Blade on a Beam Wiper?

Does Sitting in the Car with the AC On Damage the Vehicle?

Can the Tank 300 use 95 octane gasoline?

How Far Can a Compact Spare Tire Travel?

How many kilometers can a Nissan X-Trail engine run?

What are the signs that indicate the need for throttle body cleaning?