How to Use Manual Shift Mode with +/-?

1 Answers
OLillian
07/28/25 3:03pm
Here is the introduction to the usage of manual shift mode with +/-: 1. P-Parking Gear: Please note this is for parking, not just stopping. Use this gear when the vehicle is parked for an extended period, and engage the handbrake simultaneously. 2. R-Reverse Gear. Typically used when parking or reversing into a space. 3. N-Neutral Gear: Do not coast in N gear. You can use N gear for short-distance towing or when waiting at a long traffic light (over two to three minutes), though P gear is also an option. 4. D-Drive Gear: Functions the same as the drive gear in an automatic transmission vehicle. 5. S-Sport Gear: Delays upshifting, generally shifting at 2500 RPM or higher, and does not use the 6th gear, meaning S gear only has 5 gears.
Was this review help?
16
5
Share
More Forum Discussions

How often should power steering fluid be replaced?

Power steering fluid should be replaced approximately every two years or 40,000 kilometers. Failure to replace it for an extended period can lead to: damage to the power steering pump, heavier steering, reduced steering sensitivity, accelerated wear of the internal gears and racks in the steering gear, and a shortened lifespan of the steering gear. Power steering fluid is a special liquid used in the car's power steering pump, which, through hydraulic action, makes the steering wheel lighter, similar to automatic transmission fluid, brake fluid, and shock absorber fluid. The reasons for power steering failure include: 1. Partial failure of the steering system; 2. Complete failure of the steering system, where the power steering function is no longer effective; 3. The handbrake is not released; 4. The EPS (Electric Power Steering) is not activated; 5. A malfunction in the power steering pump.
20
0
Share

What does the Volkswagen CCS gear mean?

Volkswagen CCS gear is the sport mode of the car. Generally, automatic transmission vehicles have gears P, R, N, D, and S. Here is an introduction to the gears: 1. P (Parking gear). When parking the car, the gear lever must be shifted into the P position. 2. R (Reverse gear). 3. N (Neutral gear). The N position is equivalent to neutral and can be used when starting the car, parking without leaving the vehicle, or during towing. 4. D (Drive gear). During normal driving, place the gear lever in the D position, and the car will automatically shift between forward gears. The D gear is the most commonly used gear. 5. S gear is the sport mode of the car ("S" stands for "Sport"). In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPMs for a longer time. This allows the car to maintain low gear and high RPM for an extended period, resulting in greater torque output and acceleration. While the car is moving, simply push the gear lever into the "S" position. It is typically used for climbing hills and quick overtaking.
19
5
Share

How to Reset the Oil Change Reminder?

To reset the oil change reminder, simply press and hold the minute button next to the instrument panel. Engine oil, also known as motor oil, serves the following purposes: 1. Cushioning the impact load on pistons, piston rings, connecting rods, and crankshaft bearings; 2. Forming a seal between the piston rings and pistons to reduce gas leakage and prevent external contaminants from entering. The steps to change the engine oil are as follows: 1. Start the vehicle's engine to warm it up; 2. Unscrew the oil drain plug; 3. Remove the oil filter; 4. Apply new oil to the gasket of the new oil filter; 5. Pour the new oil into the oil pan; 6. Check for leaks under the engine, inspect the oil dipstick, and start the engine for testing.
13
1
Share

How to Remove Adhesive from Film?

The methods to remove adhesive from film are: 1. Soak the adhesive area with essential balm for 15 minutes, then wipe it off with a dry cloth; 2. Squeeze lemon juice on the adhesive-stained area and rub it repeatedly to remove; 3. Turn on the hair dryer to the hot air setting, blow on the adhesive marks to soften them, then erase with an eraser or a soft cloth; 4. Drop some medical alcohol on the adhesive marks to soak, then wipe off with a soft cloth or paper towel. The functions of the film are: 1. It can insulate heat in summer, saving air conditioning energy; 2. It can reduce energy loss in winter, maintaining the temperature inside the car; 3. It blocks ultraviolet rays, extending the lifespan and quality of interior decorations; 4. It reduces glare, ensuring safe and comfortable driving.
13
1
Share

How to Open the Fuel Tank Cap on a Buick Regal?

To open the fuel tank cap on a Buick Regal, follow these steps: Unlock the central locking system from inside the car, then press the fuel tank cap to open it. The functions of the fuel tank include: 1. Displaying the recommended fuel grade for the vehicle; 2. Showing the standard tire pressure values; 3. Equipped with a vent hole to drain rainwater. Taking the Buick Regal 2020 model as an example, it features a 4-door, 5-seat sedan body structure with dimensions of 4904mm in length, 1863mm in width, and 1461mm in height, a wheelbase of 2829mm, and a fuel tank capacity of 55 liters. The Buick Regal 2020 is powered by a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm, paired with a 9-speed automatic transmission.
18
4
Share

What is a 7-Speed Dual Clutch Transmission?

A 7-speed dual clutch transmission refers to a vehicle having seven forward gears. The dual clutch transmission is a type of transmission that combines the characteristics of both manual and automatic transmissions, positioned between the two. This type of transmission is also known as a semi-automatic transmission, clutchless manual transmission, or automated manual transmission. The method for driving a 7-speed dual clutch transmission is as follows: 1. When starting, ensure to press the brake, then shift into N (Neutral) to start. After starting is complete, shift into D (Drive), release the brake, and press the accelerator; 2. When parking, first press the brake, wait until the vehicle comes to a complete stop, then shift into N (Neutral), and finally turn off the engine and shift into P (Park) to park; 3. During a red light, you should press the brake and shift into N (Neutral); 4. When encountering traffic congestion, shift from N (Neutral) to S (Sport); 5. For long uphill or downhill distances, use D (Drive) or S (Sport).
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.