How to Use Hill Descent Control?

1 Answers
DeStella
07/25/25 7:29am
How to use the Hill Descent Control system: 1. Activate the function. 2. Release the throttle and brake, only steering the wheel is required. Here are the detailed instructions: 1. The Hill Descent Control system, also known as the Downhill Assist Control, is commonly found in off-road SUVs. Its full English name is Hill-Descent-Control, abbreviated as HDC. 2. It is an automatic control system applied during downhill driving. 3. The working principle of the HDC system is to coordinate the brakes and ABS, allowing the vehicle to maintain a low speed and not lose traction when descending steep slopes. 4. Generally, the HDC system sets a speed limit to enable the driver to control the vehicle more comfortably.
Was this review help?
20
4
Share
More Forum Discussions

Should You Shift to Neutral or Keep the Brake Pedal Pressed at a Red Light?

Here are the reasons for shifting to neutral or keeping the brake pedal pressed at a red light: 1. If the red light lasts long: If you have to wait at an intersection for an extended period, you should shift to neutral (N) and engage the handbrake. Keeping the brake pedal pressed for too long can cause the transmission fluid temperature to rise excessively. 2. If the red light is short: If the wait at the intersection is brief, there's no need to shift to neutral to minimize impact; simply keep the transmission in drive (D) and press the brake pedal. Below are some precautions to take when waiting at a red light: 1. Do not shift to reverse before the car comes to a complete stop: If you need to shift to reverse, ensure the vehicle has fully stopped. Otherwise, it may damage the gears or even the entire transmission. 2. Avoid frequent gear changes: While shifting to sport mode (S) allows the car to change gears freely, it's best not to use it regularly. Frequent use of S mode can severely affect the transmission.
10
2
Share

What to Do When the Dashboard Turns Yellow and Opaque?

Dashboard yellowing and opacity can be resolved by soaking in white vinegar or scrubbing with toothpaste. For electric vehicle dashboards, it is recommended to avoid direct sunlight and cover them when not in use. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Additional information: Below is an introduction to the electric vehicle dashboard battery level display: 1. H=High, indicating sufficient battery level. 2. L=Low, indicating low battery level or insufficient charge. 3. E=Empty, meaning no power or very low battery level.
14
2
Share

How to Straighten a Bent Motorcycle Handlebar?

If the handlebar is bent but the bike doesn't pull to one side, it's relatively easy to fix. In this case, there's no issue with the bike's body or frame. The problem usually occurs when the handlebar gets knocked during a fall, causing pressure on the triple tree (also known as the "top yoke" or "steering stem"). This results in pure handlebar misalignment. Simply disassemble the triple tree to realign it, adjusting the handlebar back to the center position. If the handlebar is deformed, replace it. There are three types of handlebar misalignment: 1. First type: The handlebar appears straight, but the bike pulls when riding hands-free. 2. Second type: The handlebar is visibly bent, but the bike doesn't pull when riding hands-free. 3. Third type: The handlebar is bent and the bike pulls when riding hands-free.
7
5
Share

Is the first maintenance at 3,000 kilometers or 5,000 kilometers?

The first maintenance should be done at 5,000 kilometers or six months, whichever comes first. This means the first maintenance can be performed within 5,000 kilometers. If there are special instructions in the vehicle's manual, follow the time specified in the manual. Relevant information is introduced as follows: 1. Key items of the first maintenance: The key items of the first maintenance include changing the engine oil and oil filter, as well as a full vehicle system inspection, such as tightening nuts, checking the chassis, tire inspection, and system computer diagnostics. 2. Reasons for changing the engine oil and oil filter: The main focus of the first maintenance is changing the engine oil and oil filter because the period before the first maintenance is the vehicle's break-in period. During this time, the gradually breaking-in engine will introduce mechanical impurities such as dust, metal wear, and carbon deposits into the engine oil. This is also why driving at high speeds during the break-in period is not recommended, as the engine oil contains too many impurities, which can lead to abnormal engine wear if driven at high speeds.
5
4
Share

Where is the Haval rearview mirror folding switch located?

Haval rearview mirror folding switch is located on the left side of the driver's seat. Here are the specific details about the rearview mirror: 1. Reinforcement method: If the connection between the interior rearview mirror and the windshield becomes loose, you can use glue to fix it. If the ball joint of the rearview mirror is loose, you can tighten the screws with tools. Generally, the loosening of the interior rearview mirror is caused by the hanging of a dashcam or heavy decorations. 2. Adjustment method: For adjusting the interior rearview mirror, first adjust the seat to a comfortable position, then align the horizon to the center of the rearview mirror, ensuring a full view of the rear windshield.
12
0
Share

What is the purpose of the yellow dividing line in the middle of the road?

The yellow dashed line in the center of the road is an indication marking. The yellow dashed line in the center of the road is mainly used to separate opposing traffic flows. If the center of the road has a yellow solid and dashed line, the solid line side prohibits vehicles from crossing the line or making left turns, while the dashed line side allows vehicles to cross the line for overtaking or making left turns. Additional information: 1. Yellow dashed line at the roadside: A yellow dashed line at the roadside indicates that long-term parking is prohibited. Yellow lines are used to distinguish lanes in different directions, typically painted in the middle of the road, acting like a divider that separates the road into two directions. 2. Double yellow dashed lines: Double yellow dashed lines indicate a tidal flow lane. Tidal flow lanes refer to lanes that are opened on certain roads based on varying traffic conditions during peak hours, adjusting the number of lanes by changing the direction of lane lights to control the flow direction on the main road, thereby improving lane usage efficiency.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.