How to Use Hazard Lights?

1 Answers
Alan
07/29/25 11:24pm
Hazard lights can only be used under certain special circumstances. There is a red triangular button in the car, and pressing this button will turn on the hazard lights. Hazard lights are essentially the left and right turn signals on the vehicle. When the hazard light switch is pressed, both the left and right turn signals will flash simultaneously. Turn signals are an important lighting system in a car. When changing lanes or making a turn, it is necessary to activate the turn signals in advance. Only in this way can drivers behind understand your intentions. Another important lighting system in a car is the brake lights. When the driver presses the brake pedal, the brake lights will illuminate, alerting drivers behind to maintain a safe distance and prevent rear-end collisions.
Was this review help?
16
4
Share
More Forum Discussions

Why can't the right rear window of the Lavida be raised or lowered?

The reasons why the right rear window of the Lavida cannot be raised or lowered are as follows: 1. Damaged window lift motor: If there is a burnt smell or abnormal noise inside the door panel when holding down the window button for a long time, it is highly likely that the window lift motor components are damaged. 2. Motor overheating protection: To protect the power supply circuit, window lift motors generally have an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, causing the window to fail to operate. 3. Clogged guide rails or aging rubber seals: Most cases of window glass failing to move are caused by mechanical jamming. Simply cleaning the guide rails and applying some lubricant can resolve the issue.
12
4
Share

How to Reset the Maintenance Reminder on a Passat?

To reset the maintenance reminder on a Passat, follow these steps: 1. With the engine off, press and hold the trip odometer reset button located below the tachometer. 2. Turn the ignition to the ON position and release the trip odometer reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The odometer reading will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition to the ON position again, and the SERVICE indicator will disappear. Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing.
19
2
Share

Does GAC Honda Have Off-Road Vehicles?

GAC Honda does not have any hardcore off-road vehicles in its lineup. GAC Honda only offers some urban SUVs, including the Vezel and the Avancier. The Avancier is a midsize SUV equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, codenamed L15BD, delivers a power output of 142 kW and a torque of 243 Nm, with the torque range between 2,000 to 5,000 rpm. This engine is paired with a CVT transmission. The 2.0-liter turbocharged engine produces 200 kW of power and 370 Nm of torque, with the torque range between 2,250 to 4,500 rpm. This engine is matched with a 9-speed automatic transmission.
6
3
Share

How to Adjust Rearview Mirrors for Beginner Drivers?

Steps for beginner drivers to adjust rearview mirrors are: 1. Understand the interior rearview mirror, ensuring all four corners of the rear windshield are visible through it; 2. Adjust the left and right tilt angles of the exterior mirrors; 3. For both left and right tilt angles, the car body should occupy one-quarter of the inner side of the mirror - this indicates proper tilt adjustment; 4. Adjust the vertical angle (up/down tilt) - set the left mirror so the sky and ground each occupy half; 5. Set the right mirror with one-third sky and two-thirds ground; 6. After adjusting according to these methods, you'll achieve clear left and right visibility.
11
4
Share

What are the power specifications of the new Buick GL8?

The new Buick GL8 is equipped with a 2.0T turbocharged engine, which delivers a maximum power of 174 kW and a maximum torque of 350 Nm. The engine reaches its peak power at 5,000 rpm and achieves maximum torque between 1,500 to 4,000 rpm. It is paired with a 6-speed automatic transmission. The new Buick GL8 features a high-strength body frame, large-size tires, and a brake disc system. It comes standard with the BOSCH 8.1 ESP electronic stability control system across all models, and higher-end variants are equipped with 6 airbags, providing 360-degree comprehensive safety protection.
8
0
Share

Is It Normal for the Steering Wheel to Have Up and Down Play?

Steering wheel up and down play is not normal and is likely due to looseness in the universal joint in the steering column, which should be repaired or replaced as soon as possible. The steering wheel is a very important vehicle component. With the continuous advancement of automotive technology, the steering wheel has evolved from a single steering function to a multifunctional device. Modern steering wheels are quite feature-rich, including functions like gear shifting and cruise control on the wheel. Below is an introduction to the steering wheel: 1. Steering Wheel Overview: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Steering Wheel Function: It converts the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.