···
Log in / Register

How to use cruise control on the Volkswagen Lamando?

4 Answers
OSimon
07/29/25 12:55pm
The method to use cruise control on the Volkswagen Lamando is: There are 4 buttons on the left side of the steering wheel, the one in the upper right corner is the master switch to turn it on; The lower left corner is to activate and set the speed based on the current speed; The upper left corner is to resume the previously saved speed after using the brake or accelerator, and the lower right corner is to temporarily turn it off. The Lamando is a compact new car launched by SAIC Volkswagen at the Chengdu Auto Show. Its body dimensions are 4599mm in length, 1826mm in width, and 1425mm in height, with a wheelbase of 2656mm. The top speed is 225km per hour, and the drive method is front-wheel drive.
Was this review help?
13
0
Share
VonJohnny
08/14/25 1:46am
I always drive my Volkswagen Lamando to work, and the cruise control is my must-have gadget on the highway. After starting the car, accelerate to over 30 km/h, then press the button with the speedometer icon on the steering wheel to activate it—the dashboard light will illuminate. Next, press the ‘Set’ button to lock the current speed, and use the nearby paddle to adjust the speed up or down to your ideal cruising value. It saves effort on long drives, keeping your leg from constantly pressing the accelerator. However, be cautious not to use it recklessly in urban areas or rainy weather, as slippery roads or traffic congestion can lead to accidents. It’s best to cancel it early by braking—safety first. Also, regularly check the buttons during maintenance to ensure they’re responsive and avoid misoperations that could affect driving.
Was this review help?
13
5
Share
Expand All
IsabelaDella
10/09/25 6:41am
As a family user driving the Lamando for outings with kids, the cruise control makes the journey more relaxing. First, accelerate to around 30km/h, then press the cruise activation button on the steering wheel—the light indicates it's ready. Press the Set button to set the target speed, and use the paddle or buttons to fine-tune the speed, then the system takes over acceleration. On long highway trips, it frees up your hands to attend to the kids, reducing the risk of fatigued driving. However, use it only on wide roads and avoid activating it in busy urban areas. To safely deactivate, lightly tap the brake—the dashboard light turns off, and it disengages. This feature is beginner-friendly and becomes quick to operate once familiar.
Was this review help?
13
4
Share
Expand All
DeBrianna
11/22/25 7:57am
The cruise control operation of the Volkswagen Lamando is quite straightforward. Activate the steering wheel button when the speed exceeds 30 km/h, then press the Set button to engage cruise control once the dashboard indicator lights up. Adjust the speed using the paddle shifters for desired acceleration or deceleration. To cancel, simply press the brake pedal or the Off button. It's fuel-efficient and convenient on highways, but not suitable for complex road conditions. Remember to maintain a sense of vehicle control and keep a safe distance to prevent accidents.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Can You Start the Car While Charging an Electric Vehicle?

You can start the car while charging an electric vehicle. Here are the specific details: Concept: A Battery Electric Vehicle (BEV) refers to a vehicle that uses an onboard power source as its driving force, with an electric motor driving the wheels, meeting all the requirements of road traffic and safety regulations. It operates using electricity stored in the battery. To drive the car, sometimes 12 or 24 batteries are used, and sometimes more are required. Types: The types of electric vehicles include Battery Electric Vehicles (BEV), Hybrid Electric Vehicles (HEV), and Fuel Cell Electric Vehicles (FCEV). Power Source: Provides electrical energy to the drive motor of the electric vehicle, which converts the electrical energy from the power source into mechanical energy. The most widely used power source is lead-acid batteries, but with the advancement of electric vehicle technology, lead-acid batteries are gradually being replaced by other types of batteries due to their low energy density, slow charging speed, and short lifespan. The power sources currently under development mainly include new types such as sodium-sulfur batteries, nickel-cadmium batteries, lithium batteries, and fuel cells.
18
2
Share

What does P plate mean?

P plate refers to a temporary license plate. A temporary license plate is a provisional vehicle driving certificate issued by the vehicle management department of the public security authority before the formal registration of a newly purchased vehicle. Eligibility and scope for applying for a temporary license plate: When driving a vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase. When transferring vehicle registration and after surrendering the official license plate, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location. Process and procedures for applying for a temporary license plate: The applicant must provide a letter of introduction from the unit, proof of vehicle origin, certificate of conformity, and other relevant documents (except for the letter of introduction, which is archived, the rest are returned to the applicant) to the vehicle management office for processing. During the application, the starting and ending points of the vehicle's journey and the duration of the temporary license plate usage must be specified. After review by the management personnel and inspection of the vehicle, the temporary license plate will be issued, with the validity period and route clearly indicated. Method for affixing temporary license plates: Two temporary license plates must be affixed simultaneously. One should be placed in the upper right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view and is not covered by compulsory insurance labels. The other should be affixed in the upper left corner of the rear windshield inside the vehicle.
4
1
Share

What Do the Indicator Lights on a Car Dashboard Represent?

Indicator lights on a car dashboard represent the parking brake indicator, charging indicator, coolant temperature warning light, oil pressure warning light, ABS indicator, fuel indicator, turn signal indicator, seat belt indicator, and front/rear fog light indicators. Below are detailed explanations: Parking Brake Indicator: This light turns on when the parking brake lever is pulled up and turns off automatically when the lever is released. It also illuminates if the brake fluid level is low. Charging Indicator: This light indicates the battery's working status. It turns on when the ignition is switched on and turns off after the engine starts. Coolant Temperature Warning Light: This light indicates that the engine coolant temperature is too high. If it illuminates, stop the vehicle immediately and turn off the engine. Oil Pressure Warning Light: This light indicates low pressure in the lubrication system. If it turns on, stop the vehicle immediately, turn off the engine, and inspect the system. ABS Indicator: This light shows the working status or faults in the ABS system. Fuel Indicator: This light indicates low fuel level. Turn Signal Indicator: When the turn signal is activated, the corresponding indicator blinks at a certain frequency. Seat Belt Indicator: This light shows the status of the seat belt. Front/Rear Fog Light Indicators: These lights indicate the working status of the front and rear fog lights.
19
2
Share

What is the difference between L2 and L3 autonomous driving?

Autonomous driving L2 is semi-autonomous driving, while L3 can achieve partial autonomous driving operations in specific environments. Introduction to L2: L2 achieves semi-autonomous driving, allowing the vehicle to operate multiple functions. Drivers can take brief breaks with their hands but must remain ready to take over driving tasks at any time. Functions included in L2 level are: full-speed adaptive cruise control, automatic parking, active lane keeping, speed limit recognition, automatic lane changing, etc. Introduction to L3: L3 enables the vehicle to perform partial autonomous driving operations in specific environments. It can determine whether to continue autonomous driving or return control to the driver based on road conditions, effectively achieving autonomous driving where the vehicle can almost independently complete all driving operations. Autonomous driving can fully anticipate all driver actions, including steering and emergency handling. In theory, autonomous driving can operate without any driver intervention, even eliminating the need for a cockpit. In a sense, autonomous driving involves a computer with independent thinking operating the vehicle. From a technical classification perspective, assisted driving and autonomous driving are entirely different concepts. No matter how advanced the assisted driving system is, it requires driver participation, constant monitoring of the vehicle's status, and even keeping hands on the steering wheel. As of now, there is no true autonomous driving in China, except in specific locations and scenarios.
20
3
Share

What is the difference between zr17 and r17 tires?

Tires labeled zr17 and r17 are actually the same; the 'Z' in the specification is a speed rating, indicating that the tire's maximum speed is 240 km/h. Tires ensure good ride comfort and smooth driving, maintain excellent adhesion between the wheels and the road, improve the vehicle's traction, braking, and off-road capability, and bear the weight of the car. Steps to replace a tire: Park the car in a safe location, turn on the hazard warning lights, and engage the handbrake. Place a triangular warning sign at an appropriate distance behind the car. Retrieve the spare tire, along with the wrench and jack from the vehicle, then remove the old tire and install the new one. Tire maintenance methods: Regularly remove stones stuck in the tire treads, minimize exposure to direct sunlight, frequently check tire pressure, maintain the suspension system, periodically inspect front wheel alignment, and adopt careful driving habits. Choose smooth roads to avoid objects that could puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires. Tire care precautions: Perform a four-wheel alignment and rotate the tires every 10,000 kilometers. Regularly check tire pressure. Replace tires when the tread wears down to the level of the wear indicators. Frequently inspect tires for bulges, cracks, cuts, punctures, valve stem rubber deterioration, and any abnormal wear patterns.
13
1
Share

What Brand is the Pentagon Star SUV?

It is George Patton. George Patton: The George Patton off-road vehicle is an imported ORV (specifically designed for the Asian market) under USSV. The 2017 model was developed based on the Ford F550 chassis, with the same series model being the Rhino-GX. There are many types of vehicles, and George Patton automobiles are just one of them. Appearance and Power: With a body length of nearly 6 meters, it is equipped with a V6 twin-turbocharged engine, delivering 375 horsepower, a traction and sport mode electronically controlled ten-speed transmission, and infrared night vision capabilities, enabling the 'war chariot' to operate in all-weather and all-terrain conditions.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.