How to Use Cruise Control on the Cruze?

How long can vehicle inspection be delayed?

Vehicle annual inspection cannot be delayed. Even one day of delay will result in penalties. The inspection can only be conducted in advance, not postponed. The items included in vehicle annual inspection are: Three major components: Check whether the engine, chassis, body, and their accessories are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced and match the initial inspection records. Lights and exhaust: Test whether the vehicle's braking performance, lights, exhaust, and other safety features comply with relevant regulations. Modifications: Inspect whether the vehicle has undergone modifications, alterations, or transformations, and whether the driving license, license plate, and all vehicle file registrations match the actual condition of the vehicle.

9

3

Share

How to Deal with a Locked Right Rear Wheel of a Car?

If the right rear wheel of a car is locked, you can release the handbrake, use a spare tire, or kick the side of the tire to solve the issue. Then, install an anti-lock braking system (ABS) to prevent future locking problems. Hazards of Wheel Locking: Friction can be divided into two types: rolling friction and sliding friction. Compared to rolling friction, sliding friction has a higher coefficient, and braking efficiency is highest when the wheels are close to locking. If the front wheels lock before the rear wheels, the car will lose steering ability. If the rear wheels lock before the front wheels, it can cause skidding. Therefore, wheel locking is very dangerous. ABS is installed to address the issue of wheel locking during braking. In cars without ABS, if the brake pedal is pressed hard while driving, the wheel speed will rapidly decrease. When the braking force exceeds the friction between the wheels and the ground, the wheels will lock. Fully locked wheels reduce the friction between the tires and the ground. If the front wheels lock, the driver cannot control the vehicle's direction. If the rear wheels lock, skidding is highly likely. In cars equipped with ABS, during emergencies, speed sensors installed on each wheel or driveshaft continuously monitor the wheel speed. A computer calculates the wheel slip rate (to determine if the wheels are locked) and compares it with the ideal slip rate, deciding whether to increase or decrease the braking pressure. The controller instructs the regulator to reduce the hydraulic pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original hydraulic pressure is restored. This cycle repeats (up to 5-10 times per second), ensuring the wheels remain rotating while maintaining maximum braking torque. Thus, ABS keeps the wheels in a slightly slipping rolling state during braking, preventing lock-up and improving braking efficiency.

18

5

Share

12123 Online License Plate Replacement Process?

Click [Vehicle Services] → [License Plate Replacement/Reissuance] to enter the license plate replacement/reissuance business process. After reading and confirming the relevant information, the user fills in details such as business type, reason for application, whether temporary plates are needed, and delivery method. Recheck the mailing address for the temporary license plate and the selected address for the vehicle license plate installation point. After confirming, enter the mobile verification code. Users can view the name of the service, the service serial number, the application date, as well as the fee information for the service. Check the online processing status. Once the license plate is ready, it can be mailed to your doorstep, eliminating the need to visit the DMV to collect the plate or certificate.

2

5

Share

How to Prevent Rolling Back When Reversing into a Parking Space?

When the clutch pedal is released to the semi-engaged state, by sensing the engine sound and the vibration of the car body, releasing the brake only when the car vibrates to a certain extent can prevent rolling back. The most crucial aspect is the control of the clutch, followed by the timing of releasing the brake. Releasing the brake too early can cause rolling back, while releasing it too late can lead to stalling. After parking, the handbrake must be firmly engaged: Once the car is stationary, the handbrake should be immediately engaged to prevent rolling back. In accidents caused by not engaging the handbrake, the consequences can range from minor collisions with cars or walls to severe cases of vehicle destruction and fatalities. Try to park away from slopes: To prevent rolling back, avoid parking on slopes whenever possible and opt for flat roads and parking spaces. On slopes, you can park with the gear engaged: For manual transmission vehicles, in addition to engaging the handbrake, you can also leave the car in gear to utilize the engine's resistance for braking, creating a double safety measure with the handbrake. Key operational techniques: Make full use of a reference point on the front of the car. When the reference point is in the middle or on one side of the road, you can accurately sense the vehicle's position to determine the timing and extent of steering or correcting the direction. Utilize your peripheral vision effectively to avoid the tendency of focusing too far ahead and making late corrections. Develop the good habit of not moving the steering wheel unless the front of the car deviates. When correcting direction, be "timely" and moderate in amplitude. Generally, when straightening the direction, it should be done slightly early and with a smaller amplitude. Combine with field training to practice the timing and speed of steering, such as figure-eight, S-shaped, and right-angle turns. When driving on the right side, to prevent the car from veering to the right, turn the steering wheel to the left until there is no play, allowing your left hand to sense the vehicle's current position. The main reasons for stalling and rolling back are poor coordination between the clutch and the accelerator. When queuing on a slope, maintain a safe distance of at least 3 meters from the car in front.

16

3

Share

What are the 16 items in the A2 subject three test?

A2 subject three test 16 items detailed introduction: Preparation before getting on the car: The student walks around the car for a week, observes the shape of the car and the surrounding environment, observes the tires and tire pressure of the car, and reports to the judge to get on the car after confirming safety. When opening the car door, pay attention to whether there is a car coming from behind, get on the car as soon as possible, and do not affect traffic. Starting: Before starting, adjust the seat, fasten the seat belt, turn on the light, brake, and shift gears, none of which can be missed. If you are afraid of forgetting, remember this mantra "from top to bottom, from left to right". When starting, pay attention to observe the rearview mirror and the condition of the car, and entering the lane at a small angle is safer. Driving in a straight line: Maintain a moderate speed and drive in a straight line. If there is a car in front, maintain a safe distance. During driving, observe the inside and outside rearview mirrors appropriately, but not for too long. Addition and subtraction gear operation:

18

5

Share

Can I rent a car with a driver's license less than three months old?

You can rent a car as long as you have obtained a motor vehicle driver's license, which grants you the right to drive motor vehicles without restrictions. When renting a car, you need to present your motor vehicle driver's license, provide a copy, sign a rental contract, and inspect the vehicle before use. Additional Information: Overview: The full name of a driver's license is a motor vehicle driver's license, also known as a 'driver's permit.' It is a legally required document for individuals who operate motor vehicles. Driving a motor vehicle requires certain skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Driving without a license is prohibited. Important Notes: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure and must be issued by an authorized agency.

19

4

Share

How to Use Cruise Control on the Cruze?

How long can vehicle inspection be delayed?

How to Deal with a Locked Right Rear Wheel of a Car?

12123 Online License Plate Replacement Process?

How to Prevent Rolling Back When Reversing into a Parking Space?

What are the 16 items in the A2 subject three test?

Can I rent a car with a driver's license less than three months old?

How to turn off the location tracking of BMW ConnectedDrive?

How to Renew an Expiring Driver's License?

What are the penalties for drivers not wearing seat belts?

How to Obtain the 6-Year Exemption Inspection Decal for Motor Vehicles?