How to Use Cruise Control on the Buick Regal?

[AmirFitz]

To activate the cruise control on the Buick Regal, follow these steps: 1. First, accelerate the Buick Regal to the desired speed, then press the cruise control button located on the left side of the steering wheel; 2. Next, adjust the speed by rolling the speed adjustment wheel on the left side of the steering wheel up or down; 3. Once the cruise control clock icon appears on the instrument panel, it indicates that the cruise control is active; 4. Finally, to cancel the cruise control, simply press the brake pedal lightly.

[LaSamantha]

Using the cruise control in my Buick Regal has made my daily commute much easier, especially on highways. There's usually an on/off button on the steering wheel—press that first to activate the system. Once you reach your desired speed, simply press 'Set' to lock it in; I typically set it between 70-80 km/h. To adjust the speed, use the '+' or '-' buttons nearby. Pressing the brake or the cancel button will deactivate cruise control, and hitting 'Resume' will return to your previously set speed. I recommend practicing in low-traffic areas first—avoid using it in the city as it can lead to mistakes. This feature helps reduce fatigue, maintains steadier throttle control, and even saves a bit of fuel over time. If it malfunctions (e.g., unresponsive buttons), it could be due to aging sensors or wiring issues—get it checked and serviced regularly. Never delay maintenance. Safety always comes first—stay focused while driving.

[VanLucille]

As a long-time Buick Regal owner, I find the cruise control operation quite simple with dedicated buttons on the left side of the steering wheel. After activating the system, accelerate to the desired speed and press "Set" to lock it in. Use the +/- buttons for minor speed adjustments. The system automatically deactivates when braking or pressing cancel, while the "Resume" button restores the set speed. It's great for reducing fatigue on long drives by eliminating constant throttle input. I always remind myself to only engage it on open highways, avoiding complex traffic situations while maintaining full attention - after all, system failures like signal loss can occur. Regular button cleaning prevents sticking, and the fuel efficiency benefit is noticeable. Remember to check your owner's manual for model-year specific details. The key is safe usage - never let the system replace vigilant observation.

[VonEloise]

When using the Buick Regal's cruise control for the first time, first locate the control area on the steering wheel to activate the system. Drive to the desired speed and press the "Set" button to lock it. Adjust the speed using the plus and minus buttons. Press the brake to cancel, or press "Resume" to continue. I tried it a few times slowly to get familiar with it, and it's super convenient on highways. Before activating, make sure the road conditions are good, and avoid using it during peak hours. For minor issues like loose buttons, get them fixed. Enjoy a more relaxed driving experience.

[VanSienna]

The cruise control operation of the Buick Regal is handled via the integrated buttons on the steering wheel. After activating the system, the speed is set and fixed, with flexible adjustment for acceleration and deceleration. I have tested it multiple times, and the system relies on the electronic control unit for operation. Pressing the brake cancels it safely, while the resume button continues. It is recommended to enable it only on stable roads to reduce driver fatigue. Note that voltage instability may cause false fault reports, requiring maintenance of the wiring. Check the sensors to prevent failure. Keep it simple and practical, suitable for daily use.