How to Use Cruise Control on Geely Emgrand?

[SanBrielle]

Geely Emgrand cruise control usage method: Press the control switch to activate cruise control standby, accelerate to the desired speed and then push the control lever downward to set the cruising speed. To cancel cruise control, you can pull the control lever upward, turn off the cruise control master switch, press the accelerator pedal, or lightly tap the brake. The Geely Emgrand has a body length, width, and height of 4632mm, 1789mm, and 1470mm respectively, with a wheelbase of 2650mm. It is equipped with a 1.5L naturally aspirated engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 80kW and a maximum torque of 142Nm.

[BradleyMarie]

As a driver who spends a lot of time on the road, I find the cruise control feature in the Geely Emgrand quite convenient. It's especially useful on highways, reducing fatigue from prolonged accelerator use. The operation is straightforward: first, accelerate to your desired speed, say 100 km/h, then press the cruise control button on the steering wheel (usually marked with a small dashboard icon). Once pressed, the system memorizes the current speed and maintains it automatically. To adjust the speed, gently press the '+' or '-' buttons, with each press changing the speed by about 1 km/h. If road conditions become complicated, like a slower car ahead, you can simply brake or press the cancel button to pause the cruise. Safety first—remember to use this feature only on highways or open roads, not in urban areas, to avoid accidents. I've noticed a slight improvement in fuel efficiency with cruise control, making long drives more relaxed by preventing unnecessary speed fluctuations. Overall, it's quite smart; the Emgrand's system is intuitive with no learning curve, and once you get used to it, it's very hassle-free.

[StMiguel]

From my experience, the cruise control operation on the Geely Emgrand has a bit of a technical feel, but don't overthink it. There's a dedicated module on the steering wheel, roughly divided into set, cancel, and adjustment buttons. To activate, first accelerate to the target speed, then press the set button to engage cruise mode. At this point, the vehicle automatically controls the throttle, allowing you to focus solely on steering. For minor speed adjustments, a quick press of the +/- buttons will do. The key is that the system has an internal module monitoring inputs—if it detects brake signals or manual cancellation, it immediately exits cruise mode. I particularly like this approach as it eliminates the risk of prolonged throttle pedal errors. Additionally, the Emgrand's system sensors are quite sensitive; it's wise to periodically check for dust blockage to ensure proper operation. During routine maintenance, ask the 4S shop to inspect the wiring to prevent functional issues. Always activate on flat roads, ideally highways or suburban areas, for optimal safety and efficiency. Overall, this feature is designed with user-friendliness in mind, offering simple and smooth operation.

[OAriel]

As a new driver who just got my license, I was a bit nervous the first time using cruise control on my Geely Emgrand, but later found it quite simple. Basically, you drive the car to a steady speed, say around 90 km/h, then locate and press the cruise button on the steering wheel to set it. After that, the car maintains speed automatically, allowing me to take my foot off the accelerator for a rest. To decrease or increase speed, just use the adjacent +/- buttons for adjustment. In case of any situation ahead, stepping on the brake cancels cruise control. I remind myself to only use it on highways and avoid city streets to prevent poor control. After several uses, I feel more confident and it even helps save some fuel. Overall, beginners are advised to practice in open areas first to familiarize themselves with button locations.

[LeRobert]

Whenever I use the cruise control in my Geely Emgrand, I always prioritize safety. The operation involves a few steps: after accelerating to the desired speed, press the set button to activate the system; use the +/- buttons to fine-tune the speed; to cancel, either step on the brake or press the pause button. The key is to ensure the car is in good condition, such as checking tire pressure and the braking system, to avoid sudden malfunctions while cruising. I only use it in stable environments like highways, avoiding rainy days or congested periods, because if the system fails, you need to be ready to take over driving at any moment. Develop good habits—check the dashboard warning lights before starting to confirm everything is normal before using cruise control with peace of mind. During regular maintenance, have the mechanic inspect the electronic control unit to ensure all wiring connections are secure. This way, you can enjoy the convenience of cruise control without risks. Overall, it's quite user-friendly, but always remember you're the main driver—don’t rely on it too much.