How to Use Cruise Control on Baojun 510?
1 Answers
Here are the operating steps for cruise control on the Baojun 510: 1. Press the ON/OFF button to activate cruise control. The CRUISE/MAIN indicator light will illuminate, indicating the cruise control system is operational. 2. Accelerate to the desired speed using the accelerator pedal, then press the SET/COAST button (allowed when speed exceeds 30Km/H) to set the current speed. The CRUISE indicator light will illuminate. Release the accelerator pedal, and the vehicle will maintain the set speed. Keep your right foot near the brake pedal to handle emergencies. 3. During cruise control, press the RES/ACCEL button to increase speed or the SET/COAST button to decrease speed, adjusting the cruising speed as needed. Additional information for cruise control operation on curves or when decelerating: 1. Press the CANCEL button or lightly tap the brake pedal to temporarily deactivate cruise control. The CRUISE indicator light will turn off. Coast to decelerate or control speed with the accelerator pedal. After exiting the curve, press the RES/ACCEL button to resume the previously set speed. 2. Hold down the SET/COAST button or press it repeatedly (each press reduces speed by 1.6Km/H) until reaching the desired speed. After exiting the curve, hold down the RES/ACCEL button or press it repeatedly (each press increases speed by 1.6Km/H) until reaching the desired speed.