How to use cruise control on Audi Q5?

[DeGabriella]

Audi Q5 cruise control usage method: 1. Press the on or off button at the top of the cruise control lever; 2. Keep the throttle steady; 3. After three seconds, push the lever downward to set the speed. The Audi Q5 is a midsize 5-door 5-seat SUV with body dimensions of: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, and fuel tank capacity 73l. The Audi Q5 is equipped with a 2.0-liter turbocharged engine with a maximum power of 169 kW. It features a front-engine four-wheel-drive layout, front suspension with five-link independent suspension, and rear suspension with trapezoidal-link independent suspension.

[VanFrancisco]

As a beginner driving an Audi Q5, I found the cruise control quite easy to use. First, drive to your desired speed, say 70 km/h, and keep the throttle steady. On the right side of the steering wheel, there's a button panel—find the 'set' button and press it, and the system will lock in the current speed for automatic cruising. To increase speed, press the '+' button; to decrease, press the '-' button—each press adjusts the speed by about 1 km/h. Canceling is simple: lightly tap the brake to disengage, or press the 'cancel' button to deactivate. I recommend trying it for the first time on an open highway to avoid panic. After a few practices, it makes long-distance driving much less tiring—no need to press the throttle, but stay alert and always watch for changes in traffic, like intervening promptly when cars get dense. The system may not activate in lower gears or at very low speeds, so I suggest maintaining at least 40 km/h. This feature really enhances driving comfort, especially for a new driver like me.

[Joshua]

Having driven the Audi Q5 for years, the cruise control is a must-have feature for my long-distance trips. The operation is super straightforward: select your desired speed, press the set button to lock it in, and use the +/- buttons for fine-tuning. Holding them down allows for quick acceleration or deceleration. A key takeaway is to activate it only when traffic is smooth—avoid using it in heavy traffic to prevent loss of control. The fastest way to cancel is by braking, but don’t wait until an emergency stop to do so. Always check your mirrors for safety to avoid blind-spot surprises. Occasional system glitches might be due to dirty buttons or circuit issues, so regular checks are wise. Another tip is to ensure you’re in Drive (D) mode for stability. This feature saves fuel and reduces fatigue—over time, it slightly lowers average fuel consumption and makes driving more relaxed and focused.

[LandonDella]

Using cruise control, safety is key. First, accelerate to your desired speed, such as 80 km/h, and press the set button to activate. To cancel, lightly tap the brake to turn it off immediately; don't rely on the system to be fully automatic—stay vigilant about road conditions. On highways, maintain a safe following distance, and avoid using it in rain or snow to prevent skidding risks. The cancel button is on the steering wheel, providing an effective backup—avoid distractions like using your phone. The core principle is human control; cruise control is just an aid—adjust promptly when speed changes. The system is simple and reliable, but driver alertness ensures safety above all.