How to use cruise control on Audi A6?

1 Answers
Lee
07/29/25 7:23pm
The cruise control switch on Audi A6 is a lever-type. Operation method: Push backward to cancel and turn off, pull forward to turn on and resume, lift upward to increase the set speed value, and press downward to decrease the set speed value. To check if cruise control is on, look for the green icon on the speedometer - if it's lit, it means it's activated. More details are as follows: 1. Activation: The Audi A6 cruise control system maintains a constant speed starting from 30km/h by adjusting engine power or activating brake intervention. The control switch for the cruise system is located on the left rear side of the steering wheel. The cruise control system can maintain speed on continuous unobstructed roads without requiring constant driver control, thereby achieving fuel-saving effects. Locate the cruise control switch (on the right side of the steering wheel), and press it when exceeding forty kilometers to maintain that speed. 2. Cancellation: Press the cruise lever downward to cancel and resume normal driving. To restore the most recent cruise information, lift the cruise lever upward. Push the cruise lever forward to accelerate, backward to decelerate. Press the cruise lever to the lowest switch position to turn off the entire system.
Was this review help?
13
3
Share
More Forum Discussions

Does playing music while parked consume battery power?

Playing music while parked does consume battery power. Here are the reasons: 1. When the car is turned off but you're still listening to music in the vehicle, it solely relies on the car battery's power. Normally, the battery is only used momentarily during engine startup. 2. After the vehicle is fully started, the engine drives the alternator to work, thereby supplying power to both the car battery and all electrical components. Therefore, if you must listen to music, it's best to keep the engine running. Never use electrical appliances in the car when the engine is off. 3. If the car has additional high-power audio equipment installed, playing music during idling or before starting the engine will place a significant burden on the battery, shortening its service life.
1
1
Share

Is It Necessary to Clean the Intake Manifold?

Cleaning the intake manifold is indeed necessary. The intake manifold is responsible for distributing gas to each cylinder's intake port. To reduce gas flow resistance and improve intake efficiency, the inner walls of the intake manifold should be smooth. Additionally, maintaining the cleanliness of the intake manifold is essential. Below are specific details about the intake manifold: 1. The gases passing through the intake manifold include air, fuel mixture, and clean air. Therefore, the intake manifold can also suffer from carbon buildup, primarily due to oil vapor. Severe carbon buildup can affect the normal operation of the engine. If carbon deposits break off and enter the engine with the gas, the engine can be easily damaged. Symptoms may include noticeable idle shaking, insufficient power, and a certain degree of increased fuel consumption. 2. If these issues arise, while addressing potential engine faults, cleaning the intake manifold should also be considered. Cleaning the intake manifold does not cause any harm and is encouraged as a regular maintenance practice to reduce carbon buildup during driving.
8
1
Share

What does an unreasonable intake camshaft position sensor signal mean?

Camshaft position sensor signal unreasonable fault code is P0341. The following is a detailed introduction about this fault code: 1. Main causes: Sensor interference; Intermittent circuit faults (intermittent open circuit, short circuit); Foreign objects between the sensor and target wheel, excessive installation gap; Target wheel damage or looseness; Sensor or connector looseness; Incorrect valve timing; Faulty camshaft position sensor itself; Incorrect target wheel position; Internal fault in the engine control unit, etc. 2. Others: Automobile faults are phenomena where the vehicle cannot perform its functions, such as difficulty in starting the engine, failure to start, oil or water leakage in the car, lighting system failure, etc. Common fault manifestations include: sudden changes in working conditions, abnormal sounds, abnormal odors, abnormal exhaust smoke, abnormal temperature, abnormal appearance, abnormal fuel and lubricant consumption, and leakage.
18
2
Share

Does the Volkswagen Bora have Bluetooth functionality?

Volkswagen Bora is equipped with Bluetooth functionality. Below are the relevant details: 1. Method for Bluetooth pairing with a phone: The Volkswagen Bora comes with an in-car Bluetooth device. The quick method to connect your phone to the car's Bluetooth is to first press the call answer button on the multifunction steering wheel twice. You will then hear a "beep" sound. Next, search for Bluetooth devices on your phone. You will see a device name starting with "vw," which is your car's Bluetooth device. Select this device to pair and enter "0000" to complete the connection. 2. Function of Bluetooth technology: In-car Bluetooth is a wireless hands-free system designed and developed based on wireless Bluetooth technology. Its main function is to connect with your phone via Bluetooth during normal driving for hands-free calls, thereby freeing your hands and reducing the risk of traffic accidents.
14
2
Share

What are the 5 gears of an automatic transmission?

Here is an introduction to the five gears of an automatic transmission: 1. The S gear stands for (sport) mode. In this gear, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time to increase the vehicle's power. 2. The P gear represents the parking gear, used when parking. This means it is engaged after the car is fully stopped. Its purpose is to effectively lock the vehicle's output system, preventing the car from moving. 3. The R gear represents the reverse gear. However, it is important to ensure the car is completely stopped before engaging this gear to avoid damaging the transmission. 4. The N gear represents the neutral gear, used when parking. 5. The D gear represents the drive gear, which is used when the vehicle is in motion.
1
4
Share

Can Power Steering Fluid and Hydraulic Oil Be Used Interchangeably?

Power steering fluid and transmission oil cannot be used interchangeably because their viscosity and additives differ, resulting in different performance characteristics. Various lubricants should be used strictly according to the manufacturer's instructions, and mixing them is prohibited to avoid damaging the machinery. Below is additional information: 1. Power steering fluid has low viscosity and high fluidity, whereas transmission oil has high viscosity and low fluidity. Power steering fluid and transmission oil are actually two different types of fluids, and their distinct functions and roles result in differences in fluidity and viscosity. Therefore, these two fluids must never be used interchangeably to prevent damage to vehicle components. 2. From an operational perspective, transmission oil not only lubricates but also transmits force. Due to significant temperature variations during operation, transmission oil operates at higher temperatures than engine oil, requiring higher-quality additives to support machine performance. In contrast, engine oil can use additives with relatively lower quality requirements.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.