How to Use Cruise Control in Trumpchi M6?

[StSawyer]

Press the power button to activate the system, and the cruise control indicator on the dashboard will light up; Accelerate to the desired speed, press the SET button, and after releasing the accelerator with your right foot, the speed will be fixed at the current speed; You can fine-tune the speed by pressing "RES" and "SET"; There are three ways to deactivate cruise control: stepping on the brake, pressing the cancel button, or pressing the power button; If cruise control is canceled by stepping on the brake or pressing the cancel button, you can press the RES button to resume the previous cruise control speed.

[JohnAnn]

I've been driving the Trumpchi M6 for many years and use cruise control frequently. The method is quite simple: first accelerate to your desired speed, say around 80km/h on the highway, then press the cruise button on the left side of the steering wheel to activate it - the light indicates it's ready. Next, press the SET button to lock the current speed, and you're set. The system automatically controls the throttle to maintain constant speed, allowing you to take your foot off the accelerator. To adjust speed, use the +/- buttons on the steering wheel for fine-tuning. To cancel, gently brake or press the CANCEL button, and the system will disengage. It's particularly fuel-efficient and reduces fatigue during highway trips, but remember not to use it in congested traffic, rainy conditions, or winding roads - always keep hands on the wheel and monitor road conditions. I recommend practicing in an open area when first using it to get familiar with the sensitivity.

[McBrooke]

As a new driver, I was a bit nervous when using the GAC M6 cruise control for the first time. The operation steps are actually not complicated: drive to the specified speed, such as above 60km/h, press the cruise button on the steering wheel to light up the indicator. Then quickly press SET, and the speed will be fixed. No need to press the accelerator anymore, the car will maintain a constant speed. The cruise can be interrupted by braking at any time, so safety is assured. I found it super relaxing for long-distance highway driving, with no fatigue in the right foot. However, it's important to regularly check the tire and brake conditions to ensure system reliability. At first, I tried setting it too sensitive, braking too hard, but now I'm used to it and find it very handy. Cruise control is suitable for flat roads; it should be turned off in mountainous or slippery conditions to avoid skidding.

[AthenaRose]

From a safety perspective, I always remind my family about the rules when using the cruise control on the Trumpchi M6. To activate it, maintain a steady speed above 40-50 km/h, press the cruise button, and then SET to lock it in. After the system is engaged, pay attention to the dashboard indicators to avoid distractions. To cancel, simply use the brake—it's straightforward and reliable. However, don’t rely on it entirely, as road accidents can happen quickly. I recommend an annual vehicle inspection to check the cruise control-related circuits, ensuring timely maintenance if any malfunctions occur. On highways, using it helps conserve energy, allowing you to focus more on surrounding traffic.

[LaStephen]

The GAC M6's cruise control is quite intelligent: it maintains a constant speed through electronic throttle control. The usage process involves starting the car, reaching the target speed, pressing the cruise button on the steering wheel to activate the mode, and then SET to save the current value. Internal sensors monitor the speed and automatically adjust it. You can RES to restore the last setting or make minor adjustments for acceleration or deceleration. This function is based on the vehicle's ECU system, offering fast response and minimal error. During maintenance, keep the software updated to optimize precision.

[DeLola]

As a GAC Motor M6 owner, I find the cruise control usage straightforward: first drive to the desired speed like 100km/h, press the cruise button to light it up, then confirm with SET. Once set successfully, it's liberating, relieving foot fatigue. To cancel, simply brake or press the dedicated button. It's a must-have for long highway trips, saving fuel efficiently, but manual control is safer when road conditions vary greatly. I usually keep the steering wheel buttons clean to avoid malfunctions.