How to Use Cruise Control in the Malibu?
4 Answers
Using the cruise control in the Malibu is as follows: 1. There are three rows of buttons on the left side of the steering wheel, locate and turn on the cruise control. 2. Press the rightmost button, and the white light on the dashboard will illuminate. 3. Then, when driving above 40 km/h, push the middle button downward to activate cruise control, and release the accelerator pedal to maintain the set speed. Below is an introduction to the cruise control system: 1. The cruise control system (CCS), also known as the speed control device or autonomous driving system. 2. Once activated at the driver's desired speed, it automatically maintains the vehicle speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 3. With this system, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed fluctuations, thereby saving fuel. 4. Currently, cruise control is mainly divided into three categories: Mechanical cable-type cruise control (suitable for vehicles with mechanical cable-type throttle control); Electronic cruise control (suitable for vehicles with electronic throttle control); Electronic intelligent multifunctional cruise control system (suitable for vehicles with electronic throttle control).
As a seasoned Malibu driver, I must say cruise control is a godsend for long-distance driving! It typically activates when the speed exceeds 40km/h; I usually get up to my desired speed on the highway, say 70km/h, then press the CRUISE button on the steering wheel to engage the system, followed by the SET button to lock in the current speed. After that, the car maintains the speed automatically—no need to press the accelerator, making the drive much easier. To speed up or slow down, just use the + and - buttons for fine-tuning. In heavy traffic, I immediately press CANCEL or lightly tap the brake to deactivate it. To resume the original speed, hit RES. This feature helps me save fuel and reduces leg fatigue, but remember not to use it in rain, snow, or complex road conditions—low visibility increases risks. I use it every week on highways, ensuring the car is in good condition before activating it to avoid system malfunctions.
Driving the Malibu to pick up and drop off my kids, cruise control has become my effortless assistant. The operation is simple: on highways or open national roads, accelerate to around 60km/h (never below 40km/h), then press the cruise switch on the steering wheel to activate. Next, maintain the desired cruising speed, say 80km/h, and press the SET button to lock it in. Once the system is engaged, I can use the + and - buttons to adjust speed, avoiding overspeeding; if I need to temporarily take control, I press CANCEL or hit the brakes, then press RES to resume later. This keeps the kids calmer and more comfortable on the road, allowing me to focus solely on driving. However, I don't recommend using it in rainy weather or urban areas—stability suffers on wet, slippery roads. Additionally, I regularly check the headlights and wipers to ensure clear visibility during cruise control, just in case of unexpected situations.
When I first bought the Malibu, I was also confused, but the cruise control is actually foolproof. Key steps: After starting the car, accelerate to over 50km/h (e.g., on the highway), press the cruise icon button on the steering column to activate the system; press the SET button to lock at the target speed; adjust speed with + or -; cancel by pressing CANCEL or braking. Resume with RES. The whole process is simple and intuitive, avoiding throttle fatigue. Note: Do not activate in complex traffic areas—newbies often make mistakes by neglecting road conditions.
