How to Use Cruise Control in the Jeep Compass?

[DiRicardo]

First, press the cruise button located above the right side of the steering wheel. After adjusting to the desired speed, press the decel/set button to activate the cruise control function. More details are as follows: 1. ON/OFF Button – Cruise control switch. (1) Function 1: When the ON/OFF button is pressed, the CRUISE/MAIN indicator light above the coolant temperature gauge will illuminate. The cruise control system is activated and ready to receive speed control commands. (2) Function 2: Pressing the ON/OFF button again will turn off the CRUISE/MAIN indicator light and deactivate the cruise control system. 2. SET/COAST Button – Speed setting/deceleration control switch (allowed when speed exceeds 30 km/h). (1) Function 1: While driving, pressing the SET/COAST button will set the current speed, and the CRUISE indicator light above the coolant temperature gauge will illuminate. Release the accelerator to maintain the set speed. (2) Function 2: During cruise control, pressing the SET/COAST button again will decrease the speed by 1.6 km/h each time. (3) Function 3: Holding down the SET/COAST button during cruise control will gradually reduce the speed. 3. RES/ACCEL Button – Acceleration setting/acceleration control switch (allowed when speed exceeds 30 km/h). (1) Function 1: During cruise control, pressing the RES/ACCEL button will increase the speed by 1.6 km/h each time. (2) Function 2: Holding down the RES/ACCEL button during cruise control will continuously increase the speed. (3) Function 3: Pressing the CANCEL button during cruise control will temporarily pause the cruise function. Pressing the RES/ACCEL button again will rapidly accelerate the vehicle back to the previously set cruise speed.

[KarterFitz]

When driving my Jeep Compass on the highway, I use cruise control to make long trips easier. Once the speed reaches above 40-50 km/h, I press the button labeled CRUISE on the steering wheel to activate the system. Then, I accelerate to my desired speed, say around 100 km/h, and press the SET button to lock it in—after that, it runs automatically. If I need to overtake, pressing the accelerator temporarily increases speed without deactivating the system; it automatically returns to the set speed afterward. Slowing down by applying the brakes will deactivate cruise control, but pressing the RESUME button instantly restores the previous setting, which is very convenient. The key is to only use it on open roads—avoid activating it in urban areas or bad weather to stay focused on road safety. Make it a habit to regularly check that the braking system is in good condition, ensuring fatigue-free driving.

[VonKira]

Before setting the cruise control, I usually check the car's condition to ensure safety. After starting the car and reaching a stable speed of over 40 km/h, locate the control buttons on the steering wheel. Press the CRUISE button lightly to activate it—a slight beep indicates the system is on. Then, accelerate to your desired speed, such as the highway speed limit of 100 km/h, and press the SET button to save the current setting. While driving, use the +/- buttons to adjust the speed. Pressing the brake will immediately deactivate the system, preventing loss of control in emergencies. Practice a few times to familiarize yourself with the button positions—avoid distractions like checking your phone while using cruise control. Ensure your tires and brakes are in good condition. This setup can significantly reduce driving stress, making it ideal for beginners or those prone to fatigue. Give it a try!

[LeJanelle]

Operating the cruise control on the Compass is straightforward. Once the speed reaches 40 mph, press the cruise switch on the steering wheel (usually labeled CRUISE) to activate the system. Continue driving until reaching the desired speed, then press SET to lock it in. The system will automatically maintain the speed. Pressing the brake or clutch will deactivate it. To resume, use the RES button. It's great for highway driving—saves fuel and effort, helps maintain focus, and ensures a relaxed drive. Just avoid unnecessary button adjustments.