How to Use Cruise Control in the Eado?

1 Answers
McJohnny
07/29/25 7:06pm
The cruise control buttons of the Eado are located near the steering wheel, with the following main functions: "SET" (set speed), "— or COAST" (decrease set speed), "RES" (resume set speed), "+ or ACCEL" (increase speed), "CANCEL" (cancel set speed), and "ON/OFF or CRUISE" (cruise control master switch). 1. To activate cruise control: Press the control switch to standby, accelerate to the desired speed, then push the control lever downward to set the cruising speed. To accelerate, push the lever upward or press the accelerator pedal. To cancel cruise control, lift the lever upward, turn off the master switch, press the accelerator, or lightly tap the brake. After pressing the cruise control master switch, the dashboard will display a cruise control icon indicating standby mode. 2. The Eado's cruise control works at any speed but can only adjust speed using the control lever above 50 km/h. Lightly tapping the brake cancels cruise control. Cruise control is suitable for use on closed roads with good conditions and low traffic. With the "CANCEL" and "RES" buttons, you can drive using a set of cruise control buttons at high speeds, except in emergencies requiring brake or accelerator pedal use.
Was this review help?
19
3
Share
More Forum Discussions

What is the fuel consumption of the Excelle?

The comprehensive fuel consumption of the Excelle is 4.7-5.0L/100km. Currently, there are 5 models of the Excelle on sale: the CVT Luxury and CVT Elite models have a comprehensive fuel consumption of 5.0L/100km. The manual Elite model has a comprehensive fuel consumption of 4.7L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.3-6.4L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, making it more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
16
1
Share

What Causes the Clicking Sound from the Front Left Wheel of a Car?

This issue may be caused by damage to the suspension control arm or aging of the shock absorber buffer rubber. If this occurs, it is recommended to inspect the shock absorber buffer rubber and check whether the suspension control arm bushings have aged. Here is some relevant information: 1. The suspension is a crucial component of the chassis, connecting the wheels to the vehicle body. Without a suspension, the car cannot operate normally. 2. There are two types of car suspensions: independent suspension and non-independent suspension. 3. Common independent suspensions in cars include MacPherson strut, multi-link suspension, double-wishbone suspension, double A-arm suspension, and double ball joint suspension. Common non-independent suspensions include torsion beam suspension and solid axle suspension. 4. Independent suspensions are disconnected in the middle, meaning there is no connection between the two wheels on the same axle. As a result, there is no interference between the wheels on the same axle in cars with independent suspension. 5. Non-independent suspensions are connected in the middle, so there is some interference between the two wheels on the same axle in cars with non-independent suspension. This is also why independent suspensions offer better handling and ride comfort compared to non-independent suspensions. 6. The structure of a car's suspension affects its handling and ride comfort, and the tuning of the suspension by engineers also influences the car's handling and ride comfort.
13
0
Share

Why Are Used MG ZS Cars So Cheap?

There are two main reasons why used MG ZS cars are cheap: there are many models in the same segment with strong competitors, and the MG ZS has a low resale value due to its limited market presence, with fewer sales and service outlets nationwide, resulting in weak purchasing power and low resale value. Below are the relevant details: Many Competitors: There are numerous domestic car models in the same segment, and their performance capabilities are quite comparable. With many competitors, the only way to stand out is through configurations and promotional discounts, such as offering larger discounts during marketing campaigns, which ultimately leads to lower prices. Low Resale Value: Compared to other cars in the same segment, the MG ZS has a smaller market presence because MG 4S stores are hard to find in many cities. This raises concerns about post-purchase maintenance and repairs, contributing to its lower price. For example, the MG 6 has a very low resale value—51.26% in the first year, but by the fifth year, it drops to just 27.25%, indicating very poor performance.
10
2
Share

Is an annual physical examination and inspection required for a B2 license?

B2 driving license holders must undergo an inspection at the end of each scoring cycle. If there are no demerit points within a scoring cycle, the B2 license holder is exempt from the inspection for that cycle and does not need to submit a physical examination report, as the inspection is automatically passed. However, if demerit points are incurred, the holder must participate in the inspection and submit a physical condition certificate. Here are the relevant details: 1. According to Article 70, motor vehicle drivers must regularly undergo inspections by the traffic management department of the public security authority as stipulated by laws and administrative regulations. When renewing a motor vehicle driving license under Articles 57 and 58 of these regulations, drivers must also undergo inspection by the traffic management department of the public security authority. 2. Drivers holding licenses for large buses, tractors, urban buses, medium-sized buses, or large trucks must undergo inspection by the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded within a scoring cycle, the inspection for that cycle is waived. 3. Drivers holding licenses for other permitted vehicle types, if involved in a traffic accident resulting in death and bearing equal or greater responsibility without having their license revoked, must undergo inspection by the traffic management department of the public security authority within 30 days after the end of the scoring cycle. Drivers may undergo inspection and submit physical condition certificates either at the place where the license was issued or elsewhere.
13
4
Share

Reasons for High Fuel Consumption in Vans

There are various reasons why vans consume a lot of fuel. Below is a detailed explanation: Vehicle-related reasons: Excessive carbon deposits in the engine: The main cause of excessive carbon deposits in the engine in the short term is the use of unsuitable fuel. This situation is more likely to occur after long-distance driving or lending the vehicle to others. During long-distance trips, drivers inevitably refuel with different local fuels. Even for the same fuel grade, the quality varies across regions, increasing the risk of using unsuitable fuel. Lending the vehicle to others makes it even harder to control fuel quality. Long overdue replacement of the "three filters": During vehicle use, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If not replaced for a long time, they become dirty and clogged, affecting performance and sending incorrect signals to the engine control unit. This leads to incomplete fuel combustion and increased carbon deposits in the engine. External factors: Poor driving habits: Personal driving habits significantly impact fuel consumption. Bad habits such as rapid acceleration and hard braking can increase fuel usage. The optimal driving speed should be maintained between 60-80 km/h. Additionally, observing road conditions in advance and using the throttle to control speed can help. Road conditions: Choosing the right route is crucial for fuel efficiency. Sometimes, a longer distance with better road conditions may be more fuel-efficient than a shorter but congested route. Therefore, selecting less congested and shorter routes can save more fuel.
3
1
Share

How to Handle the Vehicle License for a Used Car?

12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.