How to use cruise control in the 2019 CR-V?
4 Answers
To activate cruise control in the 2019 CR-V, follow these steps: 1. Ensure the vehicle speed is above 60 km/h, then press the CRUSE button on the right side of the steering wheel to turn on cruise control. 2. Press the SET- button on the right to set the current speed as the cruising speed. Important notes for using cruise control in the Honda CR-V: 1. Cruise control requires the driver to apply the brakes, while adaptive cruise control can achieve automation. 2. Applying the brakes serves as the termination signal for cruise control. The previously set speed value is still stored in the system and can be directly resumed. 3. Avoid using cruise control in complex road conditions or under adverse weather conditions, as it may pose a danger. 4. On downhill sections, the vehicle may exceed the set cruising speed. In such cases, apply the brakes or turn off the cruise control function.
As the owner of a 2019 CR-V, I often use cruise control on highways to save effort. The operation is very simple: first drive above 40 km/h, then press the cruise switch button on the right side of the steering wheel to activate the system. Next, press the SET button to lock the current speed, and the cruise icon will appear on the dashboard. To fine-tune the speed, use the + or - buttons, with each press increasing or decreasing speed by 1 km/h. It's especially convenient for long trips, allowing you to relax your feet while saving fuel and ensuring safety. But remember to use it only on open roads—cancel it promptly in heavy traffic or rainy conditions by lightly tapping the brake or pressing the CANCEL button. Press RES to resume the previous speed, and don't forget to turn off the cruise control after use to avoid accidental activation. After using it for over a year, I've found that mastering its operation makes driving much more relaxed.
The design of the cruise control on the 2019 CR-V is quite smart. Once activated, the system automatically maintains speed using the vehicle speed sensor, with all operation buttons located on the right side of the steering wheel: press the CRUISE button to turn it on or off, SET to lock the speed, and use + and - to adjust. I tested it on the highway, setting it to maintain a constant speed of 90 km/h, which proved more fuel-efficient than manually pressing the accelerator. Safety is key: pressing the brake at any time immediately cancels the cruise control, avoiding rear-end collisions. Also, be cautious not to rely on it in curves or on slopes, as the system doesn’t automatically reduce speed. For beginners, I recommend practicing on open roads first. I’ve noticed it’s best not to use it when the battery is low or warning lights are on—checking the manual can help prevent issues. Overall, it’s practical but requires common sense to operate.
Cruise control is a driving assistance feature, and it should be used with caution in the 2019 CR-V. When the speed exceeds 40 km/h, press the CRUISE button on the steering wheel to activate it, and press SET to set the speed. Use the + and - buttons to adjust. I always remind myself to use it only on straight highways and maintain a safe distance. To cancel cruise control, lightly tap the brake; to resume, press the RES button. However, avoid using it in the city or heavy traffic, as it can be distracting. Safety first: Regularly check the system, and don't rely on it during winter or after rain. It's easy to use and quick to master, but don't over-rely on mechanical assistance.
