How to Use Cruise Control in Honda Elysion?

1 Answers
VanAiden
07/29/25 5:46pm
Honda Elysion cruise control activation method is as follows: 1. Press the control switch to activate cruise control standby, accelerate to the desired speed, then push the control lever downward to set the cruise speed. 2. To accelerate, push the control lever upward or press the accelerator pedal. 3. To cancel cruise control, lift the control lever upward, turn off the cruise control master switch, press the accelerator pedal, or gently tap the brake. Below are precautions for using cruise control in Honda Elysion: (1) Cruise control requires the driver to manually apply the brakes; adaptive cruise control will automatically brake. However, full automation of electronic devices still requires gradual improvement, so it is recommended that drivers remain attentive to road conditions. (2) Pressing the brake will deactivate cruise control, but the set speed value remains and can be manually restored. (3) Using cruise control can be dangerous on winding, steep, bumpy, slippery roads, or in heavy traffic. Please turn off cruise control and drive manually. (4) On downhill slopes, the vehicle may accelerate quickly. In such cases, apply the brakes or turn off the cruise control function.
Was this review help?
18
3
Share
More Forum Discussions

What is the difference between high-speed and low-speed gears?

The difference between high-speed and low-speed gears in a car is that high-speed gears allow for faster speeds, while low-speed gears result in slower speeds. Additionally, when driving on the same road, using a high-speed gear is more fuel-efficient than using a low-speed gear. Below are detailed explanations about car gears: 1. Speed range: First gear corresponds to a speed of 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. 2. Gear shifting timing: For most cars, the optimal time to shift gears is when the engine speed reaches 2000 r/min, and it should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
13
3
Share

What is the working principle of a dual-clutch automatic transmission?

Dual-clutch automatic transmission works by using an integrated mechatronic module with electronic and hydraulic components to perform gear shifting and clutch operations. The following explains the principle and advantages of a dual-clutch transmission: Principle of Dual-Clutch Transmission: A dual-clutch automatic transmission is based on the foundation of a manual transmission. Unlike a manual transmission, a DCT has two clutches connected to two input shafts, and gear shifting and clutch operations are achieved through an integrated mechatronic module with electronic and hydraulic components. Advantages of Dual-Clutch Transmission: The gear shifting time of a dual-clutch transmission is extremely short, even faster than a manual transmission, taking less than 0.2 seconds. Because the dual-clutch transmission eliminates torque interruption, the engine power is continuously utilized and always operates at its optimal performance, leading to significant fuel savings. Compared to traditional planetary gear automatic transmissions, it is more beneficial for improving fuel economy, reducing fuel consumption by approximately 15%.
13
3
Share

Is It Normal for a Car's Exhaust Pipe Not to Drip Water?

It is normal for a car's exhaust pipe not to drip water. The specific reasons and precautions for exhaust pipe dripping are as follows: Specific reasons for exhaust pipe dripping: The reason the exhaust pipe drips water is due to low environmental temperatures. When gasoline burns completely, it produces water and carbon dioxide. At high temperatures, water exists as vapor, which condenses in the exhaust pipe and muffler. However, when the ambient temperature is higher, the water vapor is expelled before it can condense, resulting in no dripping. Precautions regarding exhaust pipe dripping: Exhaust pipe dripping usually occurs at the tail end. If water leaks from the front section of the exhaust pipe, it is necessary to check whether water has entered the combustion chamber and flowed directly from the engine to the front section before being expelled. This could cause engine malfunctions and requires inspection and repair.
10
3
Share

What are the effects of using 92 gasoline in a car designed for 95?

Using 92 gasoline in a car designed for 95 may cause engine knocking. Here is some relevant information about 95 gasoline: 1. Definition: 95 gasoline consists of 95% isooctane and 5% n-heptane. High-compression engines can also use lower-grade gasoline, but you should not blindly choose gasoline based on the compression ratio. Instead, follow the manufacturer's requirements for refueling. 2. Difference from 92 gasoline: The main difference lies in the octane rating, with no other essential distinctions. 95 gasoline is composed of 5% n-heptane and 95% isooctane, while 92 gasoline consists of 8% n-heptane and 92% isooctane. 95 gasoline has a higher octane rating than 92 gasoline, making it more stable and easier to burn, and it also delivers greater power output compared to 92 gasoline.
20
0
Share

How to Sell a Car in Another Location?

Selling a car in another location can be done by bringing the relevant documents to the local vehicle management office to complete the transfer procedures. Below is an introduction to the process of selling a car in another location: 1. Processing the relocation-out procedure: When processing the relocation-out procedure, the original license plate and vehicle registration certificate will be reclaimed, and a temporary license plate valid for 30 days will be issued. This temporary plate should be kept safely, as it must be submitted when processing the relocation-in procedure. Completing the transfer legally finalizes the change of vehicle ownership, ensuring the legitimacy of the vehicle's origin. 2. Resolve any violations before the transfer registration: According to Article 18 of the "Motor Vehicle Registration Regulations," for vehicles whose ownership has been transferred, the new owner must apply for a transfer registration at the vehicle management office within 30 days of the vehicle's delivery. Before applying for the transfer registration, all traffic violations and accidents related to the vehicle must be resolved.
1
0
Share

What Are the Essential Driving Knowledge for Beginners?

Here are the essential driving tips for novice drivers: 1. Pay attention to speed: Unless on a highway, it's advisable for beginners to maintain a steady speed of around 60, which helps with control. 2. Frequently check the rearview mirrors: Rearview mirrors allow you to observe the road conditions behind and to the sides of your vehicle, especially when changing lanes, reversing, or overtaking, where they play a crucial role. 3. Maintain a safe distance: New drivers tend to follow too closely. If the car in front brakes or cuts in, a beginner's typical reaction is to brake immediately, sometimes even oversteering due to nervousness, which can lead to accidents. Therefore, keeping a safe distance from the car ahead is crucial. When someone cuts in, slow down appropriately to yield. 4. Use lights correctly: Avoid turning on hazard lights randomly. Turn on the parking lights at dusk, and fog lights should only be used in foggy conditions with poor visibility.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.