How to Use Cruise Control in Golf?

1 Answers
IkerLynn
07/30/25 7:57am
Golf's cruise control is operated via buttons on the left side of the steering wheel. Here is a detailed introduction on how to use Golf's cruise control: 1. Press RES to resume cruise, CNL to cancel cruise control, and the 0/1 button to turn off cruise control. 2. Before activating cruise control, set the cruising speed using the SET button (Note: Cruise control function can only be used at speeds above 30km/h). 3. The silver button on the left side of the steering wheel is used to adjust the cruise control speed; tilting it left or right controls the speed. 4. Driving assistance systems: Lane keeping assist, blind spot assist, parking assist, front assist system, etc.
Was this review help?
13
4
Share
More Forum Discussions

Can the first maintenance be done at any 4S store?

The first maintenance can be performed at any 4S store. Here are the precautions for the first car maintenance: 1. Pay attention to the maintenance time: When consumers pick up the car, the staff of the 4S store will inform them of the first maintenance time and mileage; the car's maintenance manual will also indicate the first maintenance time and mileage, and the first maintenance can be carried out according to the marked information. 2. Pay attention to the engine oil used in the first maintenance: Since the vehicle is in the running-in period, the parts have not been fully run-in, impurities may appear during use, affecting the performance of the engine oil. It is necessary to replace the engine oil in time during the first maintenance to avoid the decline in the performance of the engine oil.
4
5
Share

Is Frame Rail Deformation Considered a Major Accident?

Rear frame rail reshaping is considered a major accident. Accident vehicles generally refer to those with structural damage. Below is the classification of accident vehicles: 1. Minor accident vehicles: If the damaged parts of the vehicle are replaceable components (such as front bumper damage, headlight damage, front fender damage, etc.), it is considered a minor accident. Such vehicles are not what is commonly referred to as accident vehicles, but they do depreciate in value. 2. Major accident vehicles: If the damaged parts of the vehicle are non-replaceable areas (such as frame rails, rocker panels, A/B/C pillars, etc.), and can only be repaired through reshaping, cutting, welding, etc., then it is considered a severe accident vehicle.
19
5
Share

What is the difference between foam wheels and titanium hollow wheels for hand trucks?

The differences between foam wheels and titanium hollow wheels for hand trucks: 1. Different materials: 1. Foam wheels: Foam wheels are wheels made by injection molding and foaming of plastic materials. 2. Titanium hollow wheels: Titanium hollow wheels are wheels with rubber directly vulcanized onto the rim. 2. Different wear resistance: 1. Foam wheels: Foam wheels are corrosion-resistant, anti-aging, and have good wear resistance, especially resistant to organic solvents, strong acids, and weak alkali corrosion. 2. Titanium hollow wheels: Titanium hollow wheels have poor wear resistance and are easily corroded and aged by organic solvents, strong acids, and weak alkalis. 3. Different safety levels: 1. Foam wheels: Foam wheels have low elasticity, are suitable for flat ground environments, and have relatively lower safety. 2. Titanium hollow wheels: Titanium hollow wheels have high elasticity, are suitable for harsh environments, and have relatively higher safety.
14
1
Share

What brand is superradial tires?

Radial is not a tire brand, but a type of tire. It refers to radial tires. Radial tires (Radial-tire) are composed of two or three layers of steel belts cross-placed and bonded to the cord fabric carcass. The carcass cords run from one bead to the other, much like the meridians of the Earth, hence the name radial tires. Here is some related information about tubeless tires: 1. Introduction: Tubeless tires, also known as "low-pressure tires" or "pneumatic tires," have high elasticity and wear resistance, along with excellent adhesion and heat dissipation performance. In particular, all-steel radial tubeless tires are economical and durable. 2. Application: Tubeless tires have been increasingly used in bicycles, motorcycles, cars, buses, and trucks in recent years.
4
0
Share

Can the first maintenance be done at a 4S store in another location?

New cars can undergo their first maintenance at a 4S store in another location. The cost of the first maintenance is covered by the manufacturer and has little to do with the 4S store. However, it is necessary to bring the owner's manual, first maintenance card, and a copy of the purchase invoice that came with the car. Among the vehicle's accompanying items, there is a nationwide directory containing the contact information of all authorized 4S stores across the country. Below are the specific details of the first maintenance items for new cars: 1. Engine system: Replace the engine oil and oil filter. Check if all lubricating fluids in the engine compartment are sufficient and if related components are loose. 2. Lighting system: Inspect whether the lighting system is functioning properly. 3. Vehicle tires: Check if the vehicle tires show excessive wear. 4. Shock absorbers: Examine whether the shock absorbers are leaking oil. 5. Vehicle chassis: Inspect the vehicle chassis for any scratches, damage, looseness, or rust issues.
14
1
Share

Why does the radar keep beeping after applying the color change film?

The film near the radar area was not applied properly, and there is still air trapped inside. The advantages and disadvantages of automotive color change films are as follows: 1. Advantages: (1) No damage to the original paint: Automotive color change films can isolate the paint from air contact, preventing oxidation and damage to the paint, thereby extending the lifespan of the original factory paint. (2) Convenient and eco-friendly: When you want to change the color, simply peel off the film from the car body without leaving any traces or harming the original paint. The film is made of high-molecular eco-friendly materials, which do not have any adverse effects on the vehicle's paint, and can be replaced at any time. 2. Disadvantages: Color change films must be registered; otherwise, it is illegal. Due to the convenience of color change films, some vehicles involved in accidents can evade responsibility by simply peeling off the film. Therefore, national regulations require that the use of automotive color change films must be registered within ten working days; otherwise, it is considered illegal.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.