How to Use Cruise Control in A6?

1 Answers
ORuby
07/29/25 8:53am
a6 cruise control is used by: locating the cruise control switch (on the right side of the steering wheel), pressing it when the speed exceeds 40 km/h to maintain that speed, and pressing the cruise control lever again to cancel and resume normal driving. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon models. The Audi A6 incorporates Audi's high-tech proprietary technologies, further enriches its luxurious configurations, and endows it with strong sporty characteristics, reflecting perfect quality from design to performance. The dimensions of this car are 5012mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm, and it features four-wheel disc brakes.
Was this review help?
20
3
Share
More Forum Discussions

How to Identify Tire Pressure Markings on Tires?

Tire pressure markings can be found on the sidewall of the tire. These markings indicate the maximum allowable pressure, not the recommended pressure. For example, a common marking might be '340 kPa,' which translates to 3.4 bar. According to national standards, tire sidewalls must display the production number, manufacturer's trademark, size specifications, load rating, maximum load and corresponding pressure, ply composition code (in Chinese Pinyin), installation requirements, and directional indicators. Strictly speaking, tire pressure refers to the air pressure inside the tire—essentially the 'blood pressure' of a car. The level of tire pressure plays a crucial role in a vehicle's performance and power.
11
5
Share

Do I need to drive the car for a four-year vehicle inspection?

Four-year vehicle inspection does not require driving the car. Here are the details about the four-year vehicle inspection: 1. Specific explanation: Whether you need to drive the car for a four-year vehicle inspection depends on the type of vehicle. If it is a family-owned seven-seat small car, from the date of purchase to the fourth year, you do not need to drive the car for inspection. You only need to take the vehicle license and the compulsory traffic insurance policy valid for the current year to the vehicle management office to receive the free annual inspection sticker and environmental protection sticker. 2. Notes: The annual inspection sticker and green environmental protection sticker for exempt vehicles are free of charge, but a copy of the vehicle license is required for each when collecting them, so prepare in advance.
9
5
Share

How to use the cruise control on Honda URV?

The method to use cruise control on Honda URV is: Press the cruise control switch. When the vehicle reaches the desired speed in cruise control mode, press the speed setting switch "set minus" button to store the current driving speed, which will then be maintained. Honda URV is a model under Honda, with body dimensions of 4825mm in length, 1942mm in width, 1670mm in height, and a wheelbase of 2820mm. In terms of appearance, the Honda URV features a large-mouth style design for the front grille, with chrome trim at the center extending into the headlights. The rear adopts a continuous one-piece taillight design across the width, giving it a more distinctive look.
3
1
Share

What transmission does the Sylphy Classic use?

The transmission brand used in the Sylphy Classic is JATCO. JATCO is the world's third-largest automatic transmission designer and manufacturer. The Sylphy Classic manual transmission uses a 5-speed manual, while the automatic transmission uses a CVT (Continuously Variable Transmission). The continuously variable transmission does not have specific fixed gears. In operation, it is similar to an automatic transmission, but the ratio changes differ from the gear-shifting process of an automatic transmission—it is continuous, ensuring smooth and uninterrupted power delivery. When using the Sylphy Classic's transmission in daily driving, pay attention to the following points: Do not delay changing the transmission fluid for too long. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. Many experienced drivers tend to coast in neutral when driving manual transmission vehicles, but for automatic transmissions, this can cause overheating and create a jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to showcase "smooth" operation, but this can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). When facing steep inclines, automatic transmission vehicles may overheat due to high load or upshift too early, resulting in insufficient climbing power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck and move the vehicle onto the tow platform while in Neutral (N). Do not use a tow rope or tow the vehicle directly.
6
1
Share

What Can Be Modified in Car Customization?

Car customization can include: 1. Vehicle appearance: Mainly involves changing the body color, applying body wraps, etc. However, the vehicle must be registered at the vehicle management office within 10 days after the color change, and new photos must be taken for the vehicle license along with updating the registration certificate; 2. Bumpers: The front and rear bumpers are crucial, but modifications must not alter the vehicle's length and width; 3. Wheels: When modifying wheels, it's important to note that the rim size cannot be changed, as altering rim size affects the car's power and performance and is considered illegal. However, replacing rims of the same size is allowed.
3
0
Share

How to Identify Michelin Tire Tread Patterns?

Michelin tire tread patterns are not related to tire models, and the model cannot be determined by the tread pattern. The differences in Michelin tire tread patterns lie in the terrain they are designed for, leading to a variety of tread patterns. Vehicle owners can choose the appropriate tread pattern based on their daily driving conditions. Here is some relevant knowledge about tire tread patterns: 1. Asymmetric tread patterns: The left and right tread structures are different, so the design typically focuses more on increasing the ground pressure of the outer tread during turns. This is why asymmetric tires may perform relatively better in certain cornering situations. 2. Unidirectional tread patterns: The tread patterns are interconnected, providing strong road performance and excellent drainage capability.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.