How to use Corolla Carlife?

What does 'int' mean on a car?

Rain wiper 'int' stands for automatic intermittent wiping function. When the lever is switched to this position, the wipers will operate automatically. Here is some information about the automatic intermittent function of wipers: 1. The automatic intermittent working position of car wipers can adjust the swinging frequency, making the wiper swing frequency vary according to the vehicle speed. 2. When the wiper lever is placed in the 'automatic intermittent swing' position, the wipers will change their swinging frequency according to the vehicle speed based on the adjusted frequency. 3. There are mainly two types of swinging frequency adjustment mechanisms: toggle type and rotary knob type.

5

3

Share

What are the causes of engine misfire?

The following are the causes of engine misfire: 1. Spark plug issues: clogged or damaged; 2. Cylinder wire issues; 3. Ignition coil issues; 4. Fuel injector issues: clogged or low voltage causing DME internal injector data loss; 5. Air-fuel mixture issues; 6. Cylinder pressure issues. The following is an analysis of engine misfire faults: 1. Engine misfire monitoring: To prevent excessive exhaust emissions and thermal damage to the catalytic converter, the engine control unit uses the crankshaft position sensor to monitor deviations in engine rotation speed to determine misfire, and the camshaft position sensor to identify the misfiring cylinder. 2. Classification of engine misfire: Engine misfire can be simply divided into two situations, one is complete misfire, meaning no combustion, and the other is partial misfire, meaning unstable combustion.

13

4

Share

Under What Circumstances Does the Cylinder Head Need to Be Replaced?

Replacement of the cylinder head is necessary when there are cracks or deformation. Below is extended information about the car cylinder head: 1. The cylinder head is the engine's cylinder head: This component is part of the engine's combustion chamber and is crucial to the engine. 2. Deformation or cracks in the cylinder head: These can affect the engine's sealing, leading to air and oil leaks. 3. Most cylinder heads do not develop cracks or deformation: Unless there were manufacturing defects or poor usage by the car owner. 4. Replacing the cylinder head is a major engine overhaul: If the cylinder head needs to be replaced, it should be done at a professional repair shop or 4S store.

19

2

Share

What are the differences between car chassis armor and engine underguard?

Car chassis armor and engine underguard have the following differences: 1. Different physical properties: The scientific name of car chassis armor is car chassis anti-collision, anti-rust, and sound insulation, which is a high-tech adhesive rubber asphalt coating; The engine underguard is not a coating but an engine protection device. The development of engine underguards in China mainly has three stages: hard plastic, resin, iron, and aluminum alloy. 2. Different uses: Car chassis armor can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower fenders, and trunk, forming a strong elastic protective layer after quick drying, which can prevent the impact of flying stones and gravel, and avoid the erosion of moisture, acid rain, and salt on the metal parts of the vehicle chassis; The engine underguard is primarily used to prevent mud from covering the engine, and secondly to prevent damage to the engine caused by uneven road surfaces during driving.

13

2

Share

What is the horsepower of the Changan CX20?

Changan CX20 horsepower: 86 horsepower for the 1.3L model and 101 horsepower for the 1.4L model. More information about the Changan CX20 is as follows: 1. The Changan CX20 is a compact car under the Changan brand, equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. 2. The 1.3-liter naturally aspirated engine has a maximum torque of 110 Nm, with a maximum power output at 6000 rpm and a maximum torque range between 3000 to 4000 rpm. 3. The 1.4-liter naturally aspirated engine delivers 101 horsepower and a maximum torque of 131 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block.

19

1

Share

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

If the vehicle annual inspection sticker is lost, you should apply for a replacement of the vehicle inspection compliance mark. The process for replacing the vehicle inspection compliance mark is as follows: 1. Emission Test: Mainly involves verifying whether the engine number matches the vehicle registration certificate, conducting a simple check of the exterior and vehicle condition, and then filling out the emission test form. 2. Violation Query: Collect and fill out the 'Motor Vehicle Periodic Inspection Registration Form' at the window, submit the completed form to the staff to check for any violation records. If there are no issues, the form will be stamped with 'Verified'. 3. Exterior Inspection: This check mainly examines whether the car lights are damaged, whether the exterior of the vehicle conforms to its original state, whether the suspension has been altered, as well as the sunroof, tires, etc. 4. On-Road Test: Primarily involves testing the brakes, headlights (high beam), chassis, and other components. 5. Payment and Collection of Sticker: Once the general inspection is approved, pay the relevant fees at each window, and then you can collect the 'Motor Vehicle Inspection Compliance Mark'.

10

4

Share

How to use Corolla Carlife?

What does 'int' mean on a car?

What are the causes of engine misfire?

Under What Circumstances Does the Cylinder Head Need to Be Replaced?

What are the differences between car chassis armor and engine underguard?

What is the horsepower of the Changan CX20?

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

Why does the wrench icon light up on the dashboard?

How to open the trunk of the Buick GL6?

What Causes Engine Shaking When Accelerating?

What is the function of the drive axle?