How to use CarPlay in the 2018 Sagitar?

What does the triangle exclamation mark in the car mean?

Car appearing with a triangle exclamation mark indicates that the vehicle has encountered a conventional fault. The reasons that may trigger the illumination of the conventional fault indicator light include: 1. Issues with the car's transmission such as high temperature, loose transmission gears, or insufficient transmission oil; 2. Malfunction of the parking sensors, damage to front and rear radars, or circuit problems preventing the car's front and rear radars from recognizing objects; 3. Faults in the vehicle's lighting system, including headlights, turn signals, brake lights, and width indicators; 4. Engine problems like high temperature, cylinder misfire, or carbon buildup; 5. Poor fuel quality, faulty spark plugs, or blockage in the fuel system; 6. Drive system failure or ESP (Electronic Stability Program) body stability system malfunction; 7. ABS (Anti-lock Braking System) failure.

14

4

Share

How to Turn On Low and High Beams?

To turn on the low and high beams: 1. Rotate the light control lever switch located on the left side of the steering wheel all the way forward to turn on the low beams; 2. Push the lever upward to turn on the high beams. The difference between low beams and high beams lies in their illumination distance: low beams illuminate 33 to 40 meters, while high beams illuminate 80 to 120 meters. Precautions for using car lights include: 1. Turn on low beams when driving at night; 2. Do not use high beams when the following vehicle is close to the leading vehicle in the same direction; 3. When passing sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic lights at night, alternate between low and high beams as a signal.

18

3

Share

Why is the engine noise loud after just changing the oil?

The reasons for loud engine noise after an oil change are: 1. The oil viscosity does not match the vehicle; 2. Use of inferior quality oil; 3. Overfilling of oil; 4. Mixing different types of oil. The functions of engine oil include: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Types of engine oil: 1. Conventional mineral oil; 2. Semi-synthetic oil; 3. Fully synthetic oil. The method for changing engine oil is: 1. Lift the vehicle, remove the undercover, and place a container of about 10 liters under the drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, tighten the drain plug after draining, and wipe and check for leaks with a paper towel; 3. Reinstall the undercover, lower the vehicle, and use a funnel to add oil into the filler port.

9

1

Share

Can dishwashing detergent be used to wash a car?

Dishwashing detergent should not be used to wash a car as it can damage the car's paint. Due to its degreasing properties, while it can remove dirt from the car's body, it will also strip away the car wax, leading to paint peeling. This not only affects the car's appearance but may also cause rust. Precautions for car washing include: 1. Do not wash the car when the engine is not completely cooled down, as this can cause premature aging of the engine. 2. Avoid washing the car under direct sunlight, as it can leave dried water spot marks on the body. 3. Do not wash the car in extremely cold weather, as water freezing can cause the paint film to crack. 4. Avoid using water other than soft water for washing, as it can damage the paint.

14

0

Share

What are the reasons why the fuel tank cover of the Sagitar cannot be opened?

The reasons why the fuel tank cover of the Sagitar cannot be opened are: the fuel tank cover is stuck or rusted, the fuel tank cover cable is too long, the fuel tank cover cable has fallen off, the fuel tank cover spring has lost its elasticity, or the fuel tank cover engagement area has aged. Taking the 2021 Sagitar as an example, it is a compact car with a body size of: length 4753mm, width 1800mm, height 1462mm, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a body weight of 1355kg. The 2021 Sagitar has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power of 85kW, matched with a 5-speed manual transmission.

9

4

Share

Should You Engage the Handbrake or Shift to P First After Parking?

After parking, you should shift to P first and then engage the handbrake. The correct method to engage the handbrake is: 1. Press the handbrake button while pulling it up; 2. Apply gentle force when pulling the handbrake; 3. The handbrake should be engaged to about 70% of its full range—pulling it all the way to the top will shorten the lifespan of the handbrake cable. The function of the handbrake is to provide braking when parking on flat ground or slopes, preventing the vehicle from moving unintentionally and avoiding traffic accidents. The dangers of forgetting to engage the handbrake include: 1. The brake pump may fail to provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Potential leakage of brake fluid, leading to brake failure.

1

5

Share

How to use CarPlay in the 2018 Sagitar?

What does the triangle exclamation mark in the car mean?

How to Turn On Low and High Beams?

Why is the engine noise loud after just changing the oil?

Can dishwashing detergent be used to wash a car?

What are the reasons why the fuel tank cover of the Sagitar cannot be opened?

Should You Engage the Handbrake or Shift to P First After Parking?

How to use the S gear in Corolla Hybrid?

How to Downshift in a Manual Transmission?

What does 'passenger' displayed on the car mean?

Where to Add Windshield Washer Fluid in Volkswagen Magotan?