How to Use Car Rearview Mirrors

1 Answers
LaNadia
07/24/25 5:29pm
Methods for using car rearview mirrors: 1. When the rear vehicle occupies the entire mirror, the distance is about 3 meters; 2. When the rear vehicle occupies two-thirds of the mirror, the distance is about 5 meters; 3. When the rear vehicle occupies half of the mirror, the distance is about 9 meters; 4. When the rear vehicle occupies one-third of the mirror, the distance is about 12 meters; 5. When the left rearview mirror shows the middle of the rear wheel cover aligned with the ground, that indicates the position of the rear bumper; 6. To judge the distance of the rear vehicle through the interior rearview mirror by observing the lower edge of the rear windshield: if the upper edge of the rear vehicle's headlight is visible, the distance between the rear trunk and the vehicle is approximately 3.5 meters; if the junction between the rear vehicle's hood and windshield is visible, the distance is about 1 meter; if the top one-third of the rear vehicle's windshield is visible, it means the vehicle is very close.
Was this review help?
9
5
Share
More Forum Discussions

How to inspect a newly purchased car?

Methods for inspecting a newly purchased car: 1. Check the production date of the car, which is usually located on the door edge. If not found, consult the car salesperson directly; 2. Inspect the car's exterior. Choose a sunny day if possible, as sunlight allows for a thorough and clear examination of the car's paint. Also, check for any dents on the car body; 3. Open and then close all four car doors to ensure they close smoothly; 4. Examine the car's interior, focusing on any stains or damages; 5. Test all functions, including the steering wheel and other features, ensuring each is operated at least twice.
10
1
Share

What Materials Are Needed for Vehicle Registration?

The materials required for vehicle registration include: 1. Original and photocopy of ID card. If someone else is handling the registration on behalf of the owner, both the handler's and the owner's IDs must be provided; 2. Original and photocopy of the invoice; 3. Original and photocopy of the vehicle qualification certificate; 4. Original and photocopy of the compulsory insurance policy; 5. Tax payment certificate. Vehicle license plates are standardized in format and style as stipulated by national vehicle management regulations. They are hard plates with registration codes issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for plates. Typically, a vehicle has two license plates, which are installed on the designated front and rear positions of the vehicle as required. Vehicle license plates serve as legal permits allowing vehicles to operate on roads. They are also credentials for traffic management departments, public security authorities, and the general public to monitor, identify, remember, and track vehicles.
11
3
Share

What is the method for changing automatic transmission fluid?

Method for changing automatic transmission fluid: 1. Drain the old automatic transmission fluid; 2. Remove the drain plug on the automatic transmission oil pan to completely drain the fluid inside the pan. Depending on the situation, remove the oil pan, thoroughly clean the oil pan and filter screen, and clean the cooler. Then reinstall the oil pan and drain plug; 3. Use compressed air to blow out as much fluid as possible from the torque converter through the filler port; 4. When refilling, add the specified automatic transmission fluid to the prescribed fluid level height; 5. Drain all the fluid again and repeat steps 1, 2, and 3; 6. Start the engine and, while the engine is idling, move through all gear positions before returning to the P position. If the fluid level is low at this point, continue adding fluid until it reaches the prescribed height; 7. Once the normal operating temperature is reached, check again whether the fluid level under hot conditions is near the upper limit of the dipstick scale, and adjust the fluid level height accordingly.
8
2
Share

What Causes Uneven Tire Wear on Cars?

The causes of uneven tire wear on cars are as follows: 1. Incorrect wheel alignment. 2. Inaccurate toe adjustment. 3. Steering gear malfunction. 4. Significant road surface irregularities and deformations. 5. Mixing tires of different specifications with large pressure variations between them. Methods to prevent uneven tire wear include: 1. Adjust tire pressure and consistently maintain proper inflation levels. 2. Regularly perform wheel dynamic balance tests; if imbalance is detected, install balancing weights. 3. Pay attention to tire maintenance and rotation - it's recommended to rotate tires every 8,000-10,000 km to ensure even wear and extend lifespan. 4. Check for loose wheel hub bolts. 5. Avoid overloading and maintain balanced tire load distribution.
8
0
Share

How to Adjust the Time on an A6?

The steps to adjust the time on an Audi A6 are as follows: 1. First, start the car and open the Audi A6 display screen, then select 'My Vehicle'. 2. Next, choose the main menu on the FAW Audi A6 display screen. 3. Then select 'Time and Date' on the FAW Audi A6 display screen. 4. Manually modify the time digits on the FAW Audi A6 display screen. 5. Finally, after adjusting the time on the FAW Audi A6, confirm the changes. New Model: There is a 'Set Time' option; press the buttons on the four corners of the large knob. Old Model: Rotate the large knob to find a separate time option below it. Adjust the time using the large knob.
15
1
Share

How to charge a mobile phone in the 2021 Audi A6L?

Apply through the Comprehensive Traffic Safety Management Platform or the Traffic Management 12123 mobile app, fill in the relevant information, and after the vehicle management office accepts the application, the required documents will be collected via courier service. Upon verification, the vehicle management office will deliver all inspection compliance labels to your doorstep by courier. Annual Inspection Considerations: During the annual inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the wiring and bulbs for aging, and replace the relevant parts if necessary. If xenon headlights have been installed, it is recommended to revert to the original headlights before the annual inspection to pass the test.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.