How to Use Car Lights in Snowy Weather?

1 Answers
VanDeclan
07/29/25 7:16pm
When driving in snowy conditions, you should turn on the headlights, clearance lights, and rear position lights. Here are the relevant details: 1. Article 58: When driving at night without streetlights, under poor lighting conditions, or in situations of low visibility such as fog, rain, snow, dust, or hail, motor vehicles must turn on the headlights, clearance lights, and rear position lights. However, high beams should not be used when a following vehicle is driving close to the vehicle in front in the same direction. In foggy conditions, motor vehicles must turn on the fog lights and hazard warning flashers. 2. Article 81: When driving on highways under low visibility weather conditions such as fog, rain, snow, dust, or hail, if visibility is less than 200 meters, drivers must turn on the fog lights, low beams, clearance lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and a distance of more than 100 meters should be maintained from the vehicle in front in the same lane.
Was this review help?
15
2
Share
More Forum Discussions

How Often Should Fully Synthetic Motor Oil Be Changed?

Fully synthetic motor oil is generally recommended to be changed every 10,000 kilometers or once a year. The specific replacement interval depends on the driving conditions. If the vehicle is primarily driven in urban areas where the engine frequently idles, it's advisable to shorten the replacement interval by approximately 1,000 kilometers or one month. For regions with significant temperature variations, it's important to use fully synthetic oil with a viscosity grade suitable for the temperature range. Motor oil consists of base oil and additives. The base oil is the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance limitations of the base oil, providing additional beneficial characteristics. Additives are a crucial component of lubricants.
4
2
Share

What to Do If Engine Oil Level Increases?

If there is too much engine oil, it can be extracted. Use a syringe with a transparent tube, pull out the dipstick, insert the tube, and suck out the oil. When the oil reaches two-thirds of the tube, seal the upper end, pull out the tube, and drain the oil. Repeat this process multiple times to remove the excess oil from the oil chamber. The hazards of excessive oil are as follows: 1. Increased resistance in the operation of internal engine components, leading to unnecessary power loss. 2. Excess oil may enter the combustion chamber, causing the engine to burn oil, resulting in excessive exhaust emissions, blue smoke, significantly increased oil consumption, increased carbon deposits inside the engine, and even premature ignition, knocking, cylinder scoring, severely damaging the engine.
13
3
Share

Does Using a Voltage Step-Down Cable for Dash Cam Damage the Battery?

Using a voltage step-down cable for a dash cam does not damage the battery. Generally, the standard voltage for dash cams is 5V, while the vehicle's voltage is 12V. The function of the step-down cable is to reduce the voltage, converting the car's 12V to the 5V suitable for the dash cam. If you choose to draw power from the cigarette lighter, a step-down cable is unnecessary, and you can directly use the power cord. A dash cam is an instrument that records images, sounds, and other related information during vehicle travel. After installing a dash cam, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. For those who enjoy road trips, it can also be used to document the process of overcoming challenging terrains.
7
2
Share

What are the precautions for vehicle annual inspection?

Vehicle annual inspection precautions include: keeping the vehicle clean and tidy; handling traffic violations; preparing relevant documents; making an appointment in advance; checking lights and brakes; inspecting vehicle license plates; preparing emergency supplies in the car, etc. Vehicle Annual Inspection: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation. Purpose of Annual Inspection: Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Annual inspection is something every car owner will encounter, and it is recommended to repair any faulty lighting systems before the inspection to avoid unnecessary troubles.
20
1
Share

How to Wax Your Own Car?

Method for waxing your own car: First, thoroughly clean the car with a dedicated car wash solution, then dry the car completely. Use a round sponge specifically designed for solid car wax to apply the wax evenly on the surface of the car paint. After application, allow the wax to dry fully. Finally, wipe off any excess wax. As a traditional item in car detailing, the primary function of car wax is to waterproof and protect against acid rain. Due to the protection of the wax, the amount of water droplets adhering to the car body is significantly reduced, with an effectiveness rate of fifty to ninety percent. Additionally, it provides protection against high temperatures and UV rays, effectively preventing the aging of the car paint. Car wax also helps to prevent static electricity and dust.
20
2
Share

What are the symptoms of a faulty battery sensor?

Battery sensor failure manifests in the following ways: 1. Rapid capacity drop during discharge. When tested with a high-rate discharge meter, individual cell voltage decreases quickly. 2. Electrolyte density falls below specified normal values. 3. Battery voltage becomes excessively high during initial and final charging stages, potentially exceeding 2.7V. 4. Electrolyte temperature rises too rapidly during charging, easily surpassing 45°C, with premature gas generation that may occur immediately upon charging. 5. Formation of hard, insoluble white large particles on the electrode plates.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.